Export limit exceeded: 403698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 403698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (403698 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-29797 | 2026-10-09 | 7.1 High | ||
| No authentication is required when updating firmware or bootloader, making it easy for malicious files to be pushed to the device. Additionally, anyone with the same software can scan a network for N-Tron devices and push/pull firmware without authenticating by using SNMP/TFTP. | ||||
| CVE-2026-33367 | 2026-10-09 | 8.1 High | ||
| SNMP can be used to perform administrative actions such as retrieving configuration files, modifying user accounts or device settings, and initiating firmware or bootloader upgrades or downgrades—all without any authentication. | ||||
| CVE-2026-20533 | 1 Mediatek | 67 Mediatek Chipset, Mt6739, Mt6739 Firmware and 64 more | 2026-10-09 | 6.7 Medium |
| In display, there is a possible escalation of privilege due to an integer overflow. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11296678; Issue ID: MSV-9167. | ||||
| CVE-2026-28745 | 2026-10-09 | 7.5 High | ||
| Usernames and passwords, including the default credentials, are stored in the configuration file using weak encryption. If the default credentials are known by a malicious user, they could obtain other credentials on the system. | ||||
| CVE-2026-20534 | 2 Mediatek, Mediatek, Inc. | 167 Mt2716, Mt2716 Firmware, Mt2735 and 164 more | 2026-10-09 | 5.3 Medium |
| In Modem, there is a possible out of bounds read due to an incorrect bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01797547; Issue ID: MSV-9155. | ||||
| CVE-2026-78795 | 2026-10-09 | N/A | ||
| An issue in Netcore B11 Enterprise-level full Gigabit 9-port shop wireless router v1.3.241114.024540 and before allows a remote attacker to obtain sensitive information | ||||
| CVE-2026-108109 | 2026-10-09 | 9.1 Critical | ||
| PHPNuxBill through 2025.3.20 contains an account takeover vulnerability in the customer password reset flow in system/controllers/forgot.php that allows unauthenticated attackers to brute-force the 6-digit otp_code. Attackers knowing a customer username can guess the code without attempt limits or lockout, then read the newly set password from the HTTP response to hijack the account. | ||||
| CVE-2026-108108 | 2026-10-09 | 7.1 High | ||
| PHPNuxBill through 2025.3.20 contains an authentication bypass vulnerability in RADIUS CHAP verification because Password::chap_verify() returns true when the supplied response does not match. Attackers who know a valid customer or PPPoE username can log in through MikroTik hotspot or PPPoE CHAP with any incorrect password to obtain network access and consume that customer's plan. | ||||
| CVE-2026-108107 | 2026-10-09 | 9.8 Critical | ||
| PHPNuxBill through 2025.3.20 contains an unauthenticated SQL injection vulnerability in the radius.php FreeRADIUS REST endpoint that interpolates request parameters into whereRaw() queries. Attackers can send crafted username, macAddr or nasid parameters to the accounting or authenticate actions to extract customer records and credentials via time-based blind SQL injection. | ||||
| CVE-2026-108106 | 1 Xerial | 1 Snappy-java | 2026-10-09 | 7.5 High |
| Xerial snappy-java before 1.1.10.9 contains an unbounded memory allocation vulnerability that allows attackers to exhaust JVM memory by declaring a large uncompressed length in compressed input. Attackers can supply a few crafted bytes to Snappy.uncompress, uncompressString, SnappyInputStream or SnappyFramedInputStream to force allocations up to 2 GB, causing OutOfMemoryError and denial of service. | ||||
| CVE-2026-108104 | 1 Xerial | 1 Snappy-java | 2026-10-09 | 4.8 Medium |
| Xerial snappy-java from 1.1.7.4 before 1.1.10.10 contains a double release vulnerability in SnappyFramedInputStream that returns pooled buffers twice when replacement allocation fails. Attackers can supply framed data with a large declared chunk length to trigger OutOfMemoryError, causing shared backing arrays that expose or overwrite other streams' decompressed data. | ||||
| CVE-2026-32645 | 2026-10-09 | 6 Medium | ||
| Default factory credentials with administrative access are enabled and persist even after configuring other administrator accounts. | ||||
| CVE-2026-39460 | 2026-10-09 | 8.1 High | ||
| Usernames and passwords, including the default factory credentials, are stored in plaintext within the configuration file. With administrator rights, the configuration file can be viewed through the CLI or they can be exported from the device through a TFTP transfer from the web interface. A TFTP transfer can be initiated through SNMP which does not require authentication. | ||||
| CVE-2026-98201 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: zero ff_effect before compat copy in input_ff_effect_from_user In the compat path input_ff_effect_from_user() aliases the caller's native struct ff_effect with the smaller struct ff_effect_compat and copies only the compat sized prefix: compat_effect = (struct ff_effect_compat *)effect; if (copy_from_user(compat_effect, buffer, sizeof(struct ff_effect_compat))) The tail of the native structure is never written. Callers pass an uninitialized on-stack object, for example evdev_do_ioctl() for EVIOCSFF, so those bytes keep their previous stack contents. input_ff_upload() then stores the full native structure in ff->effects[id], from where a uinput based force feedback daemon can read it back via UI_BEGIN_FF_UPLOAD, disclosing kernel stack memory to userspace. Zero the effect before the compat copy. | ||||
| CVE-2026-98211 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b command, but mmci_remove() never cancels it. The work can subsequently dereference the devm-allocated mmci_host after it has been released. Mask the controller interrupts and disable the delayed work during removal. This drains any queued instance and stops an IRQ handler that is still in progress from queueing the work again once it has been disabled. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98212 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when request_atomic() returns -EBUSY; today sdhci-sprd is the only consumer that implements request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but is never cancelled during driver removal. Work still pending at unbind can therefore run after the devm allocation has been released and dereference hsq->mmc and hsq->mrq. Use devm_work_autocancel() to cancel and drain retry_work before the devm allocation is released. By the time devres cleanup begins, mmc_remove_host() has already stopped the host, so no new requests can arm the work. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98214 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: selinux: recheck intermediate backing files on mprotect() mprotect() can be used to bypass the SELinux checks that mmap() performs against the intermediate layers of a stacked filesystem. mmap() checks every backing layer as the request descends through the stack. mprotect() only has the lowest backing file in vma->vm_file, so it rechecks the top-level user and the lowest mounter, but skips the mounters of every layer in between. With two nested overlayfs mounts and a policy denying mounter_t -> middle_file_t:file { execute }, a direct mmap(PROT_EXEC) is denied: avc: denied { execute } for pid=71 comm="nested_exec" path="/payload" dev="overlay" ino=9 scontext=user_u:base_r:mounter_t tcontext=user_u:object_r:middle_file_t tclass=file permissive=0 while mmap(PROT_NONE) followed by mprotect(PROT_EXEC) succeeds. Preserve each intermediate path, mounter SID and file-description SID in the backing-file security blob, copying the saved entries when another backing layer is opened. Allocate the array only for nested backing files, and release it and the path references in the backing_file_free hook. During mprotect(), recheck fd { use } and the requested inode permissions for every saved mounter, and include the intermediate layers in the execmod checks. Policy for nested stacking may then need to grant intermediate mounters what a direct mmap() already requires, and execmod on intermediate labels for binaries using text relocations. Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built SELinux policy, on a mainline tree containing commit f2381b546e7e ("fs: fix user path of nested backing files"). [PM: subject tweak] | ||||
| CVE-2026-98219 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Close the pre-enable ops error claim window scx_alloc_and_add_sched() publishes ops->priv before scx_root_enable_workfn() switches the state to SCX_ENABLING. An error claimed via scx_bpf_error_bstr() from an associated BPF program in that window is consumed by scx_disable_workfn(), which takes the pre-enable shortcut in scx_root_disable(). The shortcut returns without any teardown and restores SCX_DISABLED with an unconditional scx_set_enable_state() xchg racing the enable workfn's own transition. The enable then completes with the claim consumed: the scheduler stays up but can never be disabled again, and bpf_scx_unreg() frees it while still in use, resulting in a use-after-free. Both WARN_ON_ONCE()s fire back to back: WARNING: kernel/sched/ext/ext.c:7522 at scx_root_enable_workfn+0xeec/0x1be0, CPU#3: scx_enable_help/276 WARNING: kernel/sched/ext/ext.c:6398 at scx_root_disable+0xb50/0xdb8, CPU#0: sched_ext_helpe/664 scx_root_enable_workfn() switches to SCX_ENABLING before the scheduler allocation, so ops->priv is never visible while SCX_DISABLED. The allocation failure path restores SCX_DISABLED. | ||||
| CVE-2026-98224 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/vma: correctly unaccount on mmap_prepare() failure __mmap_setup() accounts memory for relevant mappings via: security_vm_enough_memory_mm() -> __vm_enough_memory() -> vm_acct_memory() If __mmap_setup() fails, this indicates that this accounting did not take place, and thus it's appropriate for __mmap_region() to jump to abort_munmap. However if call_mmap_prepare() fails, it also jumps there and any accounted memory is not correctly unaccounted. Fix this by handling each error separately. | ||||
| CVE-2026-98234 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: cap hh_flows_limit at change time hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge hh_flows_limit lets each new heavy-hitter flow pass the hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory growth. Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the hhf_init() default) and report the rejected value via extack. The deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on TCA_OPTIONS. Configs relying on hh_limit above the default were relying on unbounded, unsafe behaviour and are not supported going forward. hhf_init() also ran hhf_change() before setting the default hh_flows_limit, so a user-supplied hh_limit at add time was clobbered back to 2048. Set the default before hhf_change() so the configured value sticks. This is a follow-up to commit eb56a495f59b ("net/sched: hhf: clamp quantum in change and init paths"), which bounded the quantum of the same qdisc; the hh_flows_limit bound is the remaining unbounded knob of that series' scope. Conditions to recreate the bug: CAP_NET_ADMIN in a user namespace; tc qdisc change dev X root hhf hh_limit 4294967295 succeeds and the value is echoed by tc qdisc show, unbounding heavy-hitter flow allocations; also tc qdisc add dev X root hhf hh_limit 500 stores 2048 instead of 500. | ||||