Export limit exceeded: 413909 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413909 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-18077 | 1 Ibm | 1 I | 2026-08-19 | 7.5 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to a stack-based buffer overflow. | ||||
| CVE-2026-72113 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex. | ||||
| CVE-2026-18068 | 1 Ibm | 1 I | 2026-08-19 | 4.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to a byte-count and element-count confusion. | ||||
| CVE-2026-68450 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: free mapping node on duplicate reloc root insert __add_reloc_root() allocates a mapping_node before inserting it into rc->reloc_root_tree. If rb_simple_insert() finds an existing entry, it returns the existing rb_node and leaves the newly allocated node unlinked. The error path then returns -EEXIST without freeing the new node. Since the node was never inserted into reloc_root_tree, the later cleanup in put_reloc_control() cannot find it either. Free the newly allocated node before returning -EEXIST. The callers currently assert that -EEXIST should not happen, so this is a defensive cleanup for an unexpected duplicate insert path. If the path is ever reached, the local allocation should still be released. | ||||
| CVE-2026-68449 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning The hand-rolled bit-scanning loop in the NCQ completion path has an infinite loop bug. When tag_mask has only high bits set (e.g. 0x80000000), the inner while loop left-shifts tag_mask until it overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1 stays 0, causing an infinite loop in hardirq context with a spinlock held. Replace the open-coded bit-scanning with __ffs() which correctly finds the least significant set bit and is bounded by the width of the argument. | ||||
| CVE-2026-18020 | 1 Ibm | 1 I | 2026-08-19 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an off-by-one error in bounds checking. | ||||
| CVE-2026-68444 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get() ffa_partition_info_get() passes uuid_str directly to uuid_parse() without a NULL check. When a caller passes NULL, uuid_parse() -> __uuid_parse() -> uuid_is_valid() dereferences the pointer, causing a kernel panic: | Unable to handle kernel NULL pointer dereference at virtual address | 0000000000000040 | pc : uuid_parse+0x40/0xac | lr : ffa_partition_info_get+0x1c/0x94 [arm_ffa] Add a NULL guard before uuid_parse() so a NULL argument returns -ENODEV instead of crashing. Callers are expected to always supply a valid partition UUID, so NULL is not a supported input. | ||||
| CVE-2026-17502 | 1 Ibm | 1 I | 2026-08-19 | 8.6 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an out-of-bounds write. | ||||
| CVE-2026-68430 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx8: drop unecessary BUG_ON() There's no need to crash the kernel for this case. (cherry picked from commit 4d7c25208ca612b754f3bf39e9f16e725b828891) | ||||
| CVE-2026-68428 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Fix use-after-free on vendor module reload mmu_destroy_caches() destroys pte_list_desc_cache and mmu_page_header_cache, but leaves both pointers unchanged. The pointers live in kvm.ko, and therefore survive when a vendor module is unloaded while kvm.ko remains loaded. If creation of pte_list_desc_cache fails during a subsequent vendor module load, its assignment sets pte_list_desc_cache to NULL and the error path calls mmu_destroy_caches(). mmu_page_header_cache still points to the cache destroyed during the preceding vendor module unload. Passing that stale pointer to kmem_cache_destroy() causes a slab use-after-free. Reproduce the issue on a v7.1.3 kernel with CONFIG_KASAN=y, CONFIG_KASAN_GENERIC=y, CONFIG_KVM=m, and CONFIG_KVM_INTEL=m. A one-shot test hook forces pte_list_desc_cache to NULL on the second invocation of kvm_mmu_vendor_module_init(): 1. Load kvm.ko and kvm-intel.ko, creating both caches. 2. Unload only kvm_intel, leaving kvm.ko loaded. 3. Reload kvm_intel and force initialization through the -ENOMEM path. KASAN reports: BUG: KASAN: slab-use-after-free in kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... kmem_cache_destroy+0x21/0x1d0 kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... Allocated by task 16817: __kmem_cache_create_args+0x12c/0x3b0 __kmem_cache_create.constprop.0+0xb6/0xf0 [kvm] kvm_mmu_vendor_module_init+0x13b/0x170 [kvm] ... Freed by task 16820: kmem_cache_destroy+0x117/0x1d0 kvm_mmu_vendor_module_exit+0x21/0x30 [kvm] Clear both pointers immediately after destroying their caches so that the stored state reflects the caches' lifetime and repeated cleanup is safe. With the fix applied, the same injected vendor module reload fails with -ENOMEM as expected and produces no KASAN report. | ||||
| CVE-2026-68422 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix root leak if its reloc root is unexpected in merge_reloc_roots() If we have an unexpected reloc_root for our root, we jump to the out label but never drop the reference we obtained for root, resulting in a leak. Add a missing btrfs_put_root() call. | ||||
| CVE-2026-68413 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ipw2100: fix potential memory leak in ipw2100_pci_init_one() The memory allocated in the ipw2100_alloc_device() function is not freed in some of the error paths in ipw2100_pci_init_one(). Fix that by converting the direct return into a goto to the error path return. The error path when pci_enable_device() fails cannot jump to fail, since at this point priv is not set, so perform error handling inline. | ||||
| CVE-2026-68411 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: clamp virtio RX length before skb_put hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by the device straight to skb_put() on a fixed-size receive skb. A backend reporting a length larger than the skb tailroom drives skb_put() past the buffer end and hits skb_over_panic() -- a host-triggerable guest panic (denial of service). Clamp the length to the skb's available room before skb_put(). A conforming device never reports more than the posted buffer size, so valid frames are unaffected; a truncated over-report then fails the length/header checks in hwsim_virtio_handle_cmd() and is dropped, so truncating rather than dropping here cannot be turned into a parsing problem. | ||||
| CVE-2026-17649 | 1 Ibm | 1 I | 2026-08-19 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read. | ||||
| CVE-2026-68410 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix memory leak in helper_firmware_cb() helper_firmware_cb() neglects to free the single-stage firmware image after a successful async load, leading to a memory leak in the USB firmware-download path. Fix this memory leak by calling release_firmware() immediately after lbs_fw_loaded() returns. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in the current wireless tree. An x86_64 allyesconfig build showed no new warnings. As we do not have compatible Libertas USB hardware for exercising this firmware-download path, no runtime testing was able to be performed. | ||||
| CVE-2026-68407 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: free RNR data on MBSSID mismatch nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR entries than MBSSID entries. The rejected RNR allocation has not been attached to the beacon data yet, so free it before returning the error. | ||||
| CVE-2026-68406 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate PMSR FTM preamble range PMSR FTM request parsing accepts preamble values outside the enumerated nl80211 preamble range. Reject out-of-range values before using them in the parser capability bit test using the policy. [drop unnecessary check] | ||||
| CVE-2026-68405 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock ieee80211_do_stop() removes AP_VLAN packets from the parent AP ps->bc_buf while holding ps->bc_buf.lock with IRQs disabled. It then calls ieee80211_free_txskb() before dropping the lock. ieee80211_free_txskb() is not just a passive SKB release. For SKBs with TX status state it can report a dropped frame through cfg80211/nl80211, and that path can reach netlink tap transmit. This is the same reason the pending queue cleanup in ieee80211_do_stop() already unlinks SKBs under the queue lock and frees them after IRQ state is restored. The buggy scenario involves two paths, with each column showing the order within that path: AP_VLAN management TX: AP_VLAN stop: 1. attach ACK-status state 1. clear the running state 2. queue a multicast SKB on 2. take ps->bc_buf.lock with IRQs parent ps->bc_buf disabled 3. unlink the AP_VLAN SKB 4. call ieee80211_free_txskb() Unlink matching AP_VLAN SKBs from ps->bc_buf under the existing lock, but move them to a local free queue. Drop the lock and restore IRQ state before calling ieee80211_free_txskb(). WARNING: kernel/softirq.c:430 at __local_bh_enable_ip | ||||
| CVE-2026-68403 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: initialize SDIO data work before cleanup brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before allocating the ordered workqueue. If that allocation fails, the function jumps to fail and calls brcmf_sdio_remove(). brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the work item before the first failure path that can reach brcmf_sdio_remove(), so the cleanup path always observes a valid work object. This issue was found by our static analysis tool and then confirmed by manual review of the probe error path and the remove-time work drain. The problem pattern is an early setup failure that reaches a cleanup helper which cancels an embedded work item before its initializer has run. A QEMU PoC forced alloc_ordered_workqueue() to fail at the same point in brcmf_sdio_probe(), before INIT_WORK(&bus->datawork) is reached. The resulting fail path calls brcmf_sdio_remove(), and DEBUG_OBJECTS reports the invalid work drain with brcmf_sdio_probe() and brcmf_sdio_remove() in the stack. | ||||
| CVE-2026-68395 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered sata_dwc_enable_interrupts() is called before platform_get_irq() and ata_host_activate(), leaving the SATA controller's interrupt mask enabled without a registered handler. If a later step fails (irq request, phy init, etc.) or if the controller asserts an interrupt during probe, the irq line may fire with no handler, causing a spurious interrupt storm. Move sata_dwc_enable_interrupts() after ata_host_activate() so that interrupts are only unmasked once the handler is registered and the core is fully initialized. | ||||