| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3, native MQTT and MQTT over WebSocket behind a trusted PROXY Protocol frontend could lose the proxy-derived client address before the MQTT authentication path checked loopback_users, causing the frontend-to-broker address to be treated as loopback. An attacker who can reach the trusted frontend and has valid credentials for a loopback-restricted account can therefore bypass the source-address restriction; the issue does not bypass password authentication. This issue is fixed in versions 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 4.3.3, 4.2.9 , 4.1.14, 4.0.24, and 3.13.18, Federation upstream in RabbitMQ skips vhost authorization allowing cross-vhost message access. what the bug lets you do. A policymaker on one vhost reads and drains messages out of another vhost it has no permission on. With the default ack-mode the source messages are consumed (deleted), not copied. Why that should not 1. Federation validates the upstream URI without any vhost-access Cross-vhost message read/drain from a per-vhost policymaker, breaking vhost tenancy This issue is fixed in versions 4.3.3, 4.2.9 , 4.1.14, 4.0.24, and 3.13.18. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.3.3 and 4.2.9, OAuth2 Client Secret Exposed via Unauthenticated JavaScript Endpoint (CWE-200). when OAuth2 authentication is enabled for the RabbitMQ Management UI and the configured flow, IDP use a client secret, the oauthclientsecret configuration value is included in the JavaScript served by the unauthenticated endpoint /js/oidc-oauth/bootstrap.js. Any user who can reach the management UI port can retrieve the OAuth2 client secret without Files: deps/rabbitmqmanagement/src/rabbitmgmtwmauth.erl, line 186 deps/rabbitmqmanagement/src/rabbitmgmtoauthbootstrap.erl, lines 35-50 deps/rabbitmqmanagement/src/rabbitmgmtdispatcher.erl, lines 45-49 (route registration) Code Path: 1. The route /js/oidc-oauth/bootstrap.js is registered as a plain Cowboy handler (rabbitmgmtdispatcher.erl:46): Credential exposure for the affected configuration: OAuth2 client secret is accessible without any authentication Token theft: Attacker can complete the authorization code flow using stolen authorization codes Client impersonation: Attacker can make requests. Any RabbitMQ deployment with: This issue is fixed in versions 4.3.3 and 4.2.9. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18, JWKS Fetch Ignores HTTP Response Status Code - Signing Key Destruction Causes Authentication DoS (CWE-252). the JWKS key fetching mechanism in uaajwt.erl does not validate the HTTP response status code when downloading signing keys from the OAuth2 provider's JWKS endpoint. Non-200 responses (including 4xx and 5xx errors) are processed identically to successful responses. When the JWKS endpoint returns an error response with a valid-JSON body that lacks a keys field, all previously cached signing keys are destroyed, causing a persistent authentication denial of Files: deps/rabbitmqauthbackendoauth2/src/uaajwt.erl, lines 50-63 deps/rabbitmqauthbackendoauth2/src/uaajwks.erl, lines 5-7 deps/rabbitmqauthbackendoauth2/src/rabbitoauth2provider.erl, lines 98-107 Bug 1: HTTP status code ignored (uaajwt.erl:50-63): The Erlang httpc module returns {ok, {{HttpVersion, StatusCode, ReasonPhrase}, Headers, Body}}. The pattern {ok, {, , JwksBody}} matches ANY successful HTTP transaction Persistent authentication DoS: Once keys are destroyed, ALL OAuth2/JWT authentication fails for all users until a new successful JWKS refresh occurs Amplification: A single attacker can deny access to all legitimate OAuth2 users across the entire RabbitMQ. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18. |
| RabbitMQ is a messaging and streaming broker. From 4.1.0 until 4.3.3, 4.2.9, and 4.1.11, Stream Management Super-Stream Binding Keys Allocation Allows Low-Privilege Node Denial of Service. rabbitMQ 4.3.1 with rabbitmqstreammanagement enabled accepts PUT /api/stream/super-streams/{vhost}/{name} requests from an authenticated management user that can access the target vhost. When the request body contains the binding-keys field, the handler parses the attacker-controlled comma-separated string and builds the full stream-name list before checking whether the user has permission to configure the resulting streams. A low-privileged management user with vhost access but no configure, write, or read permission can therefore force large transient allocations before the resource permission check. In a 768 MB memory-limited container, one HTTP PUT with about 4.5 MB of JSON body killed the RabbitMQ container with Docker state exited true An authenticated low-privileged management user can kill a memory-limited RabbitMQ node with one HTTP This issue is fixed in versions 4.3.3, 4.2.9, and 4.1.11. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6, Atom table exhaustion via management API node field. pUT /api/queues/:vhost/:name (and the exchanges and bindings endpoints) accepts a node JSON field. The value goes through rabbitnodes:make → listtoatom with no cluster membership check first. Each unique value permanently leaks one atom. A March 2026 refactoring (ea61ce2563) introduced safe helpers in rabbitmgmtnodes.erl (parsenodename, safeatom, and requirenodename, using binarytoexistingatom) and fixed several callers (QQ replica ops, wmauthattempts, wmnodememoryets, getsortreverse, and rabbitfederationmgmt), but getnode/1 in rabbitmgmtutil.erl:880-885, the primary vector used by directrequest/6, was not Roughly 900K requests crash the VM via systemlimit, and all tenants lose Any user with the management tag and one vhost, the lowest privilege This issue is fixed in versions 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ Management rendered an AMQP authorization-error reason containing an attacker-controlled queue name as HTML when the OAuth management UI was enabled. Exploitation requires an attacker with queue configure permission, a management administrator who can see but cannot read that queue, and the administrator clicking Get Message(s). A queue name containing a base element can then retarget the automatic relative refresh because the Content Security Policy omits base-uri and connect-src, and an attacker endpoint that permits the management origin through CORS can receive the victim's Authorization header. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| Spring Tools for Eclipse stores the Spring Boot DevTools remote secret (spring.devtools.remote.secret) as a plain string attribute on the "Spring Boot DevTools Client" launch configuration. Eclipse persists launch configuration attributes as cleartext XML, either to workspace metadata or, if the user marks the configuration as a shared file, directly into the project tree where it can be committed to version control. This secret is the sole credential protecting the DevTools remote restart/reload endpoint, which accepts and executes arbitrary class bytes on the target application. Anyone able to read the .launch file (via filesystem access, a workspace backup, or a shared VCS repository) can extract the secret and use it to achieve remote code execution against the associated Spring Boot application.
Affected Spring Products and Versions:
Spring Tools for Eclipse: 5.2.0 and earlier |
| The Boot Dashboard Docker integration in Spring Tools publishes container control ports on all of the host's network interfaces (0.0.0.0) rather than restricting them to loopback.
Affected Spring Products and Versions:
Spring Tools for Eclipse: 5.2.0 and earlier |
| When enabling Spring Boot DevTools support for a remote application target (for example a Docker container or Cloud Foundry app) from the Spring Tools Boot Dashboard, Spring Tools generates a shared secret that authenticates DevTools remote-restart uploads to the deployed application. This secret was generated using a non-cryptographic pseudo-random number generator rather than a cryptographically secure source of randomness.
Affected Spring Products and Versions:
Spring Tools for Eclipse: 5.2.0 and earlier |
| Spring Tools for Eclipse renders Spring Boot starter wizard dependency tooltips in a native embedded browser (SWT Browser) with JavaScript enabled. Using untrusted and compromised Initializr endpoints for the Spring Boot starter wizard can result in arbitrary script execution inside the embedded browser when a developer hovers a dependency checkbox in the New Spring Starter Project wizard. Impact is limited to in-IDE UI spoofing and outbound network beaconing rather than full code execution.
Affected Spring Products and Versions:
Spring Tools for Eclipse: 5.2.0 and earlier |
| Spring Statemachine's Kryo-based persistence backends (JPA, MongoDB, Redis and ZooKeeper) deserialise persisted state-machine contexts without enforcing a class allowlist (CWE-502, deserialisation of untrusted data), which can lead to remote code execution inside the application JVM.
Affected versions:
Spring Statemachine 4.0.0 through 4.0.1
Spring Statemachine 3.2.0 through 3.2.4 |
| A path traversal vulnerability exists in curl <8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user's home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user. |
| DefaultExecutionContextSerializer, used by default in Spring Batch's JDBC job repository, passes Base64-decoded bytes directly to ObjectInputStream.readObject() without an ObjectInputFilter that restricts types to a trusted class allowlist.
Spring Batch 6.0.0 - 6.0.4
Spring Batch 5.2.6 and earlier |
| The Spring Boot language server logs the raw value of the https_proxy/HTTPS_PROXY/http_proxy/HTTP_PROXY environment variable at INFO level whenever it creates an outbound HTTP client and no explicit http.proxy workspace setting is configured. Corporate proxy URLs frequently embed Basic-auth credentials in the form http://user:pass@proxy:8080, and the language server writes this value to its log file without any redaction. Since language server log files are often attached to bug reports or are readable by other local users/processes, this can result in disclosure of proxy credentials.
Affected Spring Products and Versions:
Spring Tools for Eclipse: 5.2.0 and earlier
Spring Tools for VSCode / Cursor / Theia: 2.2.0 and earlier |
| Starting Spring Boot applications in the Spring Tools with the live information mode enabled makes the running application vulnerable against JMX-based remote code execution.
Affected Spring Products and Versions:
Spring Tools for Eclipse: 5.2.0 and earlier
Spring Tools for VSCode / Cursor / Theia: 2.2.0 and earlier |
| An issue was discovered in Pivotal Spring Web Flow through 2.4.4. Applications that do not change the value of the MvcViewFactoryCreator useSpringBinding property which is disabled by default (i.e., set to 'false') can be vulnerable to malicious EL expressions in view states that process form submissions but do not have a sub-element to declare explicit data binding property mappings. |
| An issue was discovered in Pivotal Spring Web Flow through 2.4.5. Applications that do not change the value of the MvcViewFactoryCreator useSpringBinding property which is disabled by default (i.e., set to 'false') can be vulnerable to malicious EL expressions in view states that process form submissions but do not have a sub-element to declare explicit data binding property mappings. NOTE: this issue exists because of an incomplete fix for CVE-2017-4971. |
| In specific scenarios involving multiple clients with different DNS resolver configurations, Reactor Netty may incorrectly reuse a previously configured DNS resolver.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
| In specific scenarios involving WebSocket handshake redirects to a different origin, the Reactor Netty WebSocket client may leak credentials. In order for this to happen, the HTTP client must have been explicitly configured to follow redirects.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
