Export limit exceeded: 409293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409293 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31774 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs() sqe->len is __u32 but gets stored into sr->len which is int. When userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF), sr->len overflows to a negative value. This negative value propagates through the bundle recv/send path: 1. io_recv(): sel.val = sr->len (ssize_t gets -1) 2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets 0xFFFFFFFFFFFFFFFF) 3. io_ring_buffers_peek(): buf->len is not clamped because max_len is astronomically large 4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs() 5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1, causing ret to increase instead of decrease, creating an infinite loop that reads past the allocated iov[] array This results in a slab-out-of-bounds read in io_bundle_nbufs() from the kmalloc-64 slab, as nbufs increments past the allocated iovec entries. BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160 Read of size 8 at addr ffff888100ae05c8 by task exp/145 Call Trace: io_bundle_nbufs+0x128/0x160 io_recv_finish+0x117/0xe20 io_recv+0x2db/0x1160 Fix this by rejecting negative sr->len values early in both io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32, any value > INT_MAX indicates overflow and is not a valid length. | ||||
| CVE-2026-31773 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated. | ||||
| CVE-2026-31772 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync hci_le_big_create_sync() uses DEFINE_FLEX to allocate a struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17) BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31) entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31, the memcpy that copies conn->bis into cp->bis writes up to 14 bytes past the stack buffer, corrupting adjacent stack memory. This is trivially reproducible: binding an ISO socket with bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will eventually trigger hci_le_big_create_sync() from the HCI command sync worker, causing a KASAN-detectable stack-out-of-bounds write: BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0 Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71 Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that conn->bis can actually carry. | ||||
| CVE-2026-31771 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: move wake reason storage into validated event handlers hci_store_wake_reason() is called from hci_event_packet() immediately after stripping the HCI event header but before hci_event_func() enforces the per-event minimum payload length from hci_ev_table. This means a short HCI event frame can reach bacpy() before any bounds check runs. Rather than duplicating skb parsing and per-event length checks inside hci_store_wake_reason(), move wake-address storage into the individual event handlers after their existing event-length validation has succeeded. Convert hci_store_wake_reason() into a small helper that only stores an already-validated bdaddr while the caller holds hci_dev_lock(). Use the same helper after hci_event_func() with a NULL address to preserve the existing unexpected-wake fallback semantics when no validated event handler records a wake address. Annotate the helper with __must_hold(&hdev->lock) and add lockdep_assert_held(&hdev->lock) so future call paths keep the lock contract explicit. Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(), hci_sync_conn_complete_evt(), le_conn_complete_evt(), hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(), hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and hci_le_past_received_evt(). | ||||
| CVE-2026-31758 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Flush anchored URBs in usbtmc_release When calling usbtmc_release, pending anchored URBs must be flushed or killed to prevent use-after-free errors (e.g. in the HCD giveback path). Call usbtmc_draw_down() to allow anchored URBs to be completed. | ||||
| CVE-2026-31742 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vt: discard stale unicode buffer on alt screen exit after resize When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize() skips reallocating the unicode buffer because vc_uni_lines is NULL. However, vc_saved_uni_lines still points to the old buffer allocated for the original dimensions. When leave_alt_screen() later restores vc_saved_uni_lines, the buffer dimensions no longer match vc_rows/vc_cols. Any operation that iterates over the unicode buffer using the current dimensions (e.g. csi_J clearing the screen) will access memory out of bounds, causing a kernel oops: BUG: unable to handle page fault for address: 0x0000002000000020 RIP: 0010:csi_J+0x133/0x2d0 The faulting address 0x0000002000000020 is two adjacent u32 space characters (0x20) interpreted as a pointer, read from the row data area past the end of the 25-entry pointer array in a buffer allocated for 80x25 but accessed with 240x67 dimensions. Fix this by checking whether the console dimensions changed while in the alternate screen. If they did, free the stale saved buffer instead of restoring it. The unicode screen will be lazily rebuilt via vc_uniscr_check() when next needed. | ||||
| CVE-2026-31739 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - Add missing CRYPTO_ALG_ASYNC The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its asynchronous algorithms, causing the crypto API to select them for users that request only synchronous algorithms. This causes crashes (at least). Fix this by adding the flag like what the other drivers do. Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just get ignored and overridden by the registration function anyway. | ||||
| CVE-2026-31731 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Address thermal zone removal races with resume Since thermal_zone_pm_complete() and thermal_zone_device_resume() re-initialize the poll_queue delayed work for the given thermal zone, the cancel_delayed_work_sync() in thermal_zone_device_unregister() may miss some already running work items and the thermal zone may be freed prematurely [1]. There are two failing scenarios that both start with running thermal_pm_notify_complete() right before invoking thermal_zone_device_unregister() for one of the thermal zones. In the first scenario, there is a work item already running for the given thermal zone when thermal_pm_notify_complete() calls thermal_zone_pm_complete() for that thermal zone and it continues to run when thermal_zone_device_unregister() starts. Since the poll_queue delayed work has been re-initialized by thermal_pm_notify_complete(), the running work item will be missed by the cancel_delayed_work_sync() in thermal_zone_device_unregister() and if it continues to run past the freeing of the thermal zone object, a use-after-free will occur. In the second scenario, thermal_zone_device_resume() queued up by thermal_pm_notify_complete() runs right after the thermal_zone_exit() called by thermal_zone_device_unregister() has returned. The poll_queue delayed work is re-initialized by it before cancel_delayed_work_sync() is called by thermal_zone_device_unregister(), so it may continue to run after the freeing of the thermal zone object, which also leads to a use-after-free. Address the first failing scenario by ensuring that no thermal work items will be running when thermal_pm_notify_complete() is called. For this purpose, first move the cancel_delayed_work() call from thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent new work from entering the workqueue going forward. Next, switch over to using a dedicated workqueue for thermal events and update the code in thermal_pm_notify() to flush that workqueue after thermal_pm_notify_prepare() has returned which will take care of all leftover thermal work already on the workqueue (that leftover work would do nothing useful anyway because all of the thermal zones have been flagged as suspended). The second failing scenario is addressed by adding a tz->state check to thermal_zone_device_resume() to prevent it from re-initializing the poll_queue delayed work if the thermal zone is going away. Note that the above changes will also facilitate relocating the suspend and resume of thermal zones closer to the suspend and resume of devices, respectively. | ||||
| CVE-2026-31719 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: krb5enc - fix async decrypt skipping hash verification krb5enc_dispatch_decrypt() sets req->base.complete as the skcipher callback, which is the caller's own completion handler. When the skcipher completes asynchronously, this signals "done" to the caller without executing krb5enc_dispatch_decrypt_hash(), completely bypassing the integrity verification (hash check). Compare with the encrypt path which correctly uses krb5enc_encrypt_done as an intermediate callback to chain into the hash computation on async completion. Fix by adding krb5enc_decrypt_done as an intermediate callback that chains into krb5enc_dispatch_decrypt_hash() upon async skcipher completion, matching the encrypt path's callback pattern. Also fix EBUSY/EINPROGRESS handling throughout: remove krb5enc_request_complete() which incorrectly swallowed EINPROGRESS notifications that must be passed up to callers waiting on backlogged requests, and add missing EBUSY checks in krb5enc_encrypt_ahash_done for the dispatch_encrypt return value. Unset MAY_BACKLOG on the async completion path so the user won't see back-to-back EINPROGRESS notifications. | ||||
| CVE-2026-31709 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the whole DACL before rewriting it in cifsacl build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated DACL that still contains a header, claims one or more ACEs, and then drive replace_sids_and_copy_aces() or set_chmod_dacl() past the validated extent while they compare or copy attacker-controlled ACEs. Factor the DACL structural checks into validate_dacl(), extend them to validate each ACE against the DACL bounds, and use the shared validator before the chmod/chown rebuild paths. parse_dacl() reuses the same validator so the read-side parser and write-side rewrite paths agree on what constitutes a well-formed incoming DACL. | ||||
| CVE-2026-31708 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds. | ||||
| CVE-2026-31700 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd() In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points directly into the mmap'd TX ring buffer shared with userspace. The kernel validates the header via __packet_snd_vnet_parse() but then re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent userspace thread can modify the vnet_hdr fields between validation and use, bypassing all safety checks. The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr to a stack-local variable. All other vnet_hdr consumers in the kernel (tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX path is the only caller of virtio_net_hdr_to_skb() that reads directly from user-controlled shared memory. Fix this by copying vnet_hdr from the mmap'd ring buffer to a stack-local variable before validation and use, consistent with the approach used in packet_snd() and all other callers. | ||||
| CVE-2026-31699 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed When retrieving the PEK CSR, don't attempt to copy the blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405 CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872 sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error. | ||||
| CVE-2026-31698 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed When retrieving the PDH cert, don't attempt to copy the blobs to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033 CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347 sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error. | ||||
| CVE-2026-31697 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed When retrieving the ID for the CPU, don't attempt to copy the ID blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388 CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222 sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error. | ||||
| CVE-2026-31693 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: some missing initializations on replay In several places in the code, we have a label to signify the start of the code where a request can be replayed if necessary. However, some of these places were missing the necessary reinitializations of certain local variables before replay. This change makes sure that these variables get initialized after the label. | ||||
| CVE-2026-31685 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_eui64: reject invalid MAC header for all packets `eui64_mt6()` derives a modified EUI-64 from the Ethernet source address and compares it with the low 64 bits of the IPv6 source address. The existing guard only rejects an invalid MAC header when `par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()` can still reach `eth_hdr(skb)` even when the MAC header is not valid. Fix this by removing the `par->fragoff != 0` condition so that packets with an invalid MAC header are rejected before accessing `eth_hdr(skb)`. | ||||
| CVE-2026-31682 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: linearize skb before parsing ND options br_nd_send() parses neighbour discovery options from ns->opt[] and assumes that these options are in the linear part of request. Its callers only guarantee that the ICMPv6 header and target address are available, so the option area can still be non-linear. Parsing ns->opt[] in that case can access data past the linear buffer. Linearize request before option parsing and derive ns from the linear network header. | ||||
| CVE-2026-31680 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: flowlabel: defer exclusive option free until RCU teardown `ip6fl_seq_show()` walks the global flowlabel hash under the seq-file RCU read-side lock and prints `fl->opt->opt_nflen` when an option block is present. Exclusive flowlabels currently free `fl->opt` as soon as `fl->users` drops to zero in `fl_release()`. However, the surrounding `struct ip6_flowlabel` remains visible in the global hash table until later garbage collection removes it and `fl_free_rcu()` finally tears it down. A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that early `kfree()` and dereference freed option state, triggering a crash in `ip6fl_seq_show()`. Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches the lifetime already required for the enclosing flowlabel while readers can still reach it under RCU. | ||||
| CVE-2026-31679 | 2 Linux, Openvswitch | 2 Linux Kernel, Openvswitch | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: validate MPLS set/set_masked payload length validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for SET/SET_MASKED actions. In action handling, OVS expects fixed-size MPLS key data (struct ovs_key_mpls). Use the already normalized key_len (masked case included) and reject non-matching MPLS action key sizes. Reject invalid MPLS action payload lengths early. | ||||