Export limit exceeded: 26162 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26162 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54228 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: raa215300: Fix resource leak in case of error The clk_register_clkdev() allocates memory by calling vclkdev_alloc() and this memory is not freed in the error path. Similarly, resources allocated by clk_register_fixed_rate() are not freed in the error path. Fix these issues by using devm_clk_hw_register_fixed_rate() and devm_clk_hw_register_clkdev(). After this, the static variable clk is not needed. Replace it with local variable hw in probe() and drop calling clk_unregister_fixed_rate() from raa215300_rtc_unregister_device(). | ||||
| CVE-2023-54246 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle() The rcuscale.holdoff module parameter can be used to delay the start of rcu_scale_writer() kthread. However, the hung-task timeout will trigger when the timeout specified by rcuscale.holdoff is greater than hung_task_timeout_secs: runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M" bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300" [ 247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds. [ 247.072529] Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7 [ 247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.074331] task:rcu_scale_write state:D stack:30144 pid:59 ppid:2 flags:0x00004000 [ 247.075346] Call Trace: [ 247.075660] <TASK> [ 247.075965] __schedule+0x635/0x1280 [ 247.076448] ? __pfx___schedule+0x10/0x10 [ 247.076967] ? schedule_timeout+0x2dc/0x4d0 [ 247.077471] ? __pfx_lock_release+0x10/0x10 [ 247.078018] ? enqueue_timer+0xe2/0x220 [ 247.078522] schedule+0x84/0x120 [ 247.078957] schedule_timeout+0x2e1/0x4d0 [ 247.079447] ? __pfx_schedule_timeout+0x10/0x10 [ 247.080032] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.080591] ? __pfx_process_timeout+0x10/0x10 [ 247.081163] ? __pfx_sched_set_fifo_low+0x10/0x10 [ 247.081760] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.082287] rcu_scale_writer+0x6b1/0x7f0 [ 247.082773] ? mark_held_locks+0x29/0xa0 [ 247.083252] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.083865] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.084412] kthread+0x179/0x1c0 [ 247.084759] ? __pfx_kthread+0x10/0x10 [ 247.085098] ret_from_fork+0x2c/0x50 [ 247.085433] </TASK> This commit therefore replaces schedule_timeout_uninterruptible() with schedule_timeout_idle(). | ||||
| CVE-2023-54247 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Silence a warning in btf_type_id_size() syzbot reported a warning in [1] with the following stacktrace: WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... Call Trace: <TASK> map_check_btf kernel/bpf/syscall.c:1024 [inline] map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198 __sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040 __do_sys_bpf kernel/bpf/syscall.c:5162 [inline] __se_sys_bpf kernel/bpf/syscall.c:5160 [inline] __x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd With the following btf [1] DECL_TAG 'a' type_id=4 component_idx=-1 [2] PTR '(anon)' type_id=0 [3] TYPE_TAG 'a' type_id=2 [4] VAR 'a' type_id=3, linkage=static and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG), the following WARN_ON_ONCE in btf_type_id_size() is triggered: if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) && !btf_type_is_var(size_type))) return NULL; Note that 'return NULL' is the correct behavior as we don't want a DECL_TAG type to be used as a btf_{key,value}_type_id even for the case like 'DECL_TAG -> STRUCT'. So there is no correctness issue here, we just want to silence warning. To silence the warning, I added DECL_TAG as one of kinds in btf_type_nosize() which will cause btf_type_id_size() returning NULL earlier without the warning. [1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ | ||||
| CVE-2023-54248 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add check for kmemdup Since the kmemdup may return NULL pointer, it should be better to add check for the return value in order to avoid NULL pointer dereference. | ||||
| CVE-2023-54249 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Only send -ENOTCONN status if client driver is available For the STOP and RESET commands, only send the channel disconnect status -ENOTCONN if client driver is available. Otherwise, it will result in null pointer dereference. | ||||
| CVE-2023-54276 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net Commit f5f9d4a314da ("nfsd: move reply cache initialization into nfsd startup") moved the initialization of the reply cache into nfsd startup, but didn't account for the stats counters, which can be accessed before nfsd is ever started. The result can be a NULL pointer dereference when someone accesses /proc/fs/nfsd/reply_cache_stats while nfsd is still shut down. This is a regression and a user-triggerable oops in the right situation: - non-x86_64 arch - /proc/fs/nfsd is mounted in the namespace - nfsd is not started in the namespace - unprivileged user calls "cat /proc/fs/nfsd/reply_cache_stats" Although this is easy to trigger on some arches (like aarch64), on x86_64, calling this_cpu_ptr(NULL) evidently returns a pointer to the fixed_percpu_data. That struct looks just enough like a newly initialized percpu var to allow nfsd_reply_cache_stats_show to access it without Oopsing. Move the initialization of the per-net+per-cpu reply-cache counters back into nfsd_init_net, while leaving the rest of the reply cache allocations to be done at nfsd startup time. Kudos to Eirik who did most of the legwork to track this down. | ||||
| CVE-2023-54277 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: Fix endpoint check The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743 The current approach for this issue failed to catch the problem because it only checks for the existence of a bulk-OUT endpoint; it doesn't check whether this endpoint is the one that the driver will actually use. We can fix the problem by instead checking that the endpoint used by the driver does exist and is bulk-OUT. | ||||
| CVE-2023-54278 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vmem: split pages when debug pagealloc is enabled Since commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled") the kernel crashes early during boot when debug pagealloc is enabled: mem auto-init: stack:off, heap alloc:off, heap free:off addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630 [..] Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e 00000000001325fc: eb880002000c srlg %r8,%r8,2 #0000000000132602: b2210051 ipte %r5,%r1,%r0,0 >0000000000132606: b90400d1 lgr %r13,%r1 000000000013260a: 41605008 la %r6,8(%r5) 000000000013260e: a7db1000 aghi %r13,4096 0000000000132612: b221006d ipte %r6,%r13,%r0,0 0000000000132616: e3d0d0000171 lay %r13,4096(%r13) Call Trace: __kernel_map_pages+0x14e/0x320 __free_pages_ok+0x23a/0x5a8) free_low_memory_core_early+0x214/0x2c8 memblock_free_all+0x28/0x58 mem_init+0xb6/0x228 mm_core_init+0xb6/0x3b0 start_kernel+0x1d2/0x5a8 startup_continue+0x36/0x40 Kernel panic - not syncing: Fatal exception: panic_on_oops This is caused by using large mappings on machines with EDAT1/EDAT2. Add the code to split the mappings into 4k pages if debug pagealloc is enabled by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel command line option. | ||||
| CVE-2023-54279 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: fw: Allow firmware to pass a empty env fw_getenv will use env entry to determine style of env, however it is legal for firmware to just pass a empty list. Check if first entry exist before running strchr to avoid null pointer dereference. | ||||
| CVE-2023-54297 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix memory leak after finding block group with super blocks At exclude_super_stripes(), if we happen to find a block group that has super blocks mapped to it and we are on a zoned filesystem, we error out as this is not supposed to happen, indicating either a bug or maybe some memory corruption for example. However we are exiting the function without freeing the memory allocated for the logical address of the super blocks. Fix this by freeing the logical address. | ||||
| CVE-2023-54298 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: quark_dts: fix error pointer dereference If alloc_soc_dts() fails, then we can just return. Trying to free "soc_dts" will lead to an Oops. | ||||
| CVE-2023-54299 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: bus: verify partner exists in typec_altmode_attention Some usb hubs will negotiate DisplayPort Alt mode with the device but will then negotiate a data role swap after entering the alt mode. The data role swap causes the device to unregister all alt modes, however the usb hub will still send Attention messages even after failing to reregister the Alt Mode. type_altmode_attention currently does not verify whether or not a device's altmode partner exists, which results in a NULL pointer error when dereferencing the typec_altmode and typec_altmode_ops belonging to the altmode partner. Verify the presence of a device's altmode partner before sending the Attention message to the Alt Mode driver. | ||||
| CVE-2023-54300 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx For the reasons also described in commit b383e8abed41 ("wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()"), ath9k_htc_rx_msg() should validate pkt_len before accessing the SKB. For example, the obtained SKB may have been badly constructed with pkt_len = 8. In this case, the SKB can only contain a valid htc_frame_hdr but after being processed in ath9k_htc_rx_msg() and passed to ath9k_wmi_ctrl_rx() endpoint RX handler, it is expected to have a WMI command header which should be located inside its data payload. Implement sanity checking inside ath9k_wmi_ctrl_rx(). Otherwise, uninit memory can be referenced. Tested on Qualcomm Atheros Communications AR9271 802.11n . Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2023-54301 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix leak in `brcmuart_probe` Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. | ||||
| CVE-2023-54313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix null pointer dereference in ovl_get_acl_rcu() Following process: P1 P2 path_openat link_path_walk may_lookup inode_permission(rcu) ovl_permission acl_permission_check check_acl get_cached_acl_rcu ovl_get_inode_acl realinode = ovl_inode_real(ovl_inode) drop_cache __dentry_kill(ovl_dentry) iput(ovl_inode) ovl_destroy_inode(ovl_inode) dput(oi->__upperdentry) dentry_kill(upperdentry) dentry_unlink_inode upperdentry->d_inode = NULL ovl_inode_upper upperdentry = ovl_i_dentry_upper(ovl_inode) d_inode(upperdentry) // returns NULL IS_POSIXACL(realinode) // NULL pointer dereference , will trigger an null pointer dereference at realinode: [ 205.472797] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 205.476701] CPU: 2 PID: 2713 Comm: ls Not tainted 6.3.0-12064-g2edfa098e750-dirty #1216 [ 205.478754] RIP: 0010:do_ovl_get_acl+0x5d/0x300 [ 205.489584] Call Trace: [ 205.489812] <TASK> [ 205.490014] ovl_get_inode_acl+0x26/0x30 [ 205.490466] get_cached_acl_rcu+0x61/0xa0 [ 205.490908] generic_permission+0x1bf/0x4e0 [ 205.491447] ovl_permission+0x79/0x1b0 [ 205.491917] inode_permission+0x15e/0x2c0 [ 205.492425] link_path_walk+0x115/0x550 [ 205.493311] path_lookupat.isra.0+0xb2/0x200 [ 205.493803] filename_lookup+0xda/0x240 [ 205.495747] vfs_fstatat+0x7b/0xb0 Fetch a reproducer in [Link]. Use the helper ovl_i_path_realinode() to get realinode and then do non-nullptr checking. | ||||
| CVE-2023-54314 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: af9005: Fix null-ptr-deref in af9005_i2c_xfer In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9005_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") | ||||
| CVE-2023-54315 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/powernv/sriov: perform null check on iov before dereferencing iov Currently pointer iov is being dereferenced before the null check of iov which can lead to null pointer dereference errors. Fix this by moving the iov null check before the dereferencing. Detected using cppcheck static analysis: linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either the condition '!iov' is redundant or there is possible null pointer dereference: iov. [nullPointerRedundantCheck] num_vfs = iov->num_vfs; ^ | ||||
| CVE-2023-54316 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: refscale: Fix uninitalized use of wait_queue_head_t Running the refscale test occasionally crashes the kernel with the following error: [ 8569.952896] BUG: unable to handle page fault for address: ffffffffffffffe8 [ 8569.952900] #PF: supervisor read access in kernel mode [ 8569.952902] #PF: error_code(0x0000) - not-present page [ 8569.952904] PGD c4b048067 P4D c4b049067 PUD c4b04b067 PMD 0 [ 8569.952910] Oops: 0000 [#1] PREEMPT_RT SMP NOPTI [ 8569.952916] Hardware name: Dell Inc. PowerEdge R750/0WMWCR, BIOS 1.2.4 05/28/2021 [ 8569.952917] RIP: 0010:prepare_to_wait_event+0x101/0x190 : [ 8569.952940] Call Trace: [ 8569.952941] <TASK> [ 8569.952944] ref_scale_reader+0x380/0x4a0 [refscale] [ 8569.952959] kthread+0x10e/0x130 [ 8569.952966] ret_from_fork+0x1f/0x30 [ 8569.952973] </TASK> The likely cause is that init_waitqueue_head() is called after the call to the torture_create_kthread() function that creates the ref_scale_reader kthread. Although this init_waitqueue_head() call will very likely complete before this kthread is created and starts running, it is possible that the calling kthread will be delayed between the calls to torture_create_kthread() and init_waitqueue_head(). In this case, the new kthread will use the waitqueue head before it is properly initialized, which is not good for the kernel's health and well-being. The above crash happened here: static inline void __add_wait_queue(...) { : if (!(wq->flags & WQ_FLAG_PRIORITY)) <=== Crash here The offset of flags from list_head entry in wait_queue_entry is -0x18. If reader_tasks[i].wq.head.next is NULL as allocated reader_task structure is zero initialized, the instruction will try to access address 0xffffffffffffffe8, which is exactly the fault address listed above. This commit therefore invokes init_waitqueue_head() before creating the kthread. | ||||
| CVE-2023-54189 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. | ||||
| CVE-2023-54232 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: m68k: Only force 030 bus error if PC not in exception table __get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored. Our 030 bus error handler is ill equipped to deal with this: Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used. In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table. Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table. I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic. Tested on 030 Atari Falcon. | ||||