Export limit exceeded: 25262 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25262 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98283 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid() kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a reference on the kvm_nested_guest pointer obtained from the IDR. A concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove / --refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving the iterating vCPU with a dangling pointer. The subsequent mutex_lock(&gp->tlb_lock) and accesses to gp->shadow_pgtable, gp->shadow_lpid and gp->l1_host all touch freed memory. The free path is fully L1-controlled. Fix this by incrementing gp->refcnt inside the loop before dropping mmu_lock, mirroring what kvmhv_get_nested() does, and releasing the reference with kvmhv_put_nested() after the per-guest work completes. This is the same get/put discipline already used at every other call site that drops mmu_lock while holding a nested-guest pointer. | ||||
| CVE-2026-98315 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: protect runlist updates with the runlist lock ntfs_non_resident_attr_shrink() calls runlist helpers that require the runlist write lock, but did not hold it while freeing clusters and truncating the runlist. Serialize those operations and the resident conversion with the runlist lock. ntfs_attr_map_cluster() can merge a newly allocated run before updating mapping pairs. If the update fails, free the clusters and restore both the in-memory runlist and on-disk mapping pairs from a saved runlist. Mark the volume in error if either rollback step fails. | ||||
| CVE-2026-98323 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Bound fragmented header copies by the remaining length siw_get_hdr() can receive an extended DDP/RDMAP header across more than one TCP callback. The first callback may receive most of the header, while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead of the number of missing bytes. This makes the destination move past the end of the header and overwrite the receive state, including fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd value as a copy offset, which creates an OOB write. Use the number of header bytes already received when calculating the next copy length. | ||||
| CVE-2026-98229 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: save input state data before secpath resets xfrm_input() stores the current xfrm_state in the skb secpath while it continues receive-side processing. Some input paths can reset that secpath before xfrm_input() has finished dereferencing the state. Receive callback users such as VTI and XFRM interfaces can reset the secpath. The VTI receive path does so before checking whether the packet crosses network namespaces, while the XFRM interface path does so only for cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also reset the secpath before the final drop callback reports the current state's protocol. If secpath_reset() drops the last state reference while the state is concurrently deleted, xfrm_input() can still dereference the freed state when selecting transport_finish() or reporting the drop callback protocol. Save the state protocol on the stack while the state is still valid, and use the already saved address family for transport_finish(). A larval XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This preserves the existing drop-path fallback while avoiding the post-reset state dereferences without adding an extra state reference to every received packet. | ||||
| CVE-2026-98349 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short beacon and probe responses libipw_process_probe_response() and the libipw_network_init() call it makes assume the frame contains the full 36-byte beacon and probe response prefix, but the ipw2100 and ipw2200 receive paths only establish that a management frame carries the generic 24-byte three-address header. libipw_network_init() then computes the information element length as stats->len - sizeof(*beacon) stats->len is a u16 and sizeof() has type size_t, so the subtraction is evaluated as size_t and wraps instead of going negative. Truncating that to the u16 length parameter of libipw_parse_info_param() yields 65524 for a 24-byte beacon, and the parser then walks the receive buffer as if it held almost 64 KiB of information elements, reading past the allocation. Reject the frame before any fixed field is touched. Found by an AI-assisted review of length arithmetic in management frame parsers. Verified with a KUnit case under Generic KASAN on arm64 under QEMU; I do not have the hardware, so it is not tested on a real device. | ||||
| CVE-2026-98186 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound the pairwise-cipher OUI walk to the IE length mwifiex_search_oui_in_ie() reads a pairwise-cipher (PTK) count from a beacon/probe-response RSN or WPA information element and then walks that many 4-byte OUIs, comparing each with memcmp(). The count comes straight from the (attacker-supplied) IE and is never checked against the element's own length, and the callers admit the element on element_id alone (has_ieee_hdr() / has_vendor_hdr(), no length check). A crafted RSN/WPA IE with a large pairwise count therefore makes the walk read up to 255 * 4 bytes past the element -- an out-of-bounds read of the kmemdup()'d beacon buffer, reachable from any AP whose beacon/probe response is processed during scan-result parsing. Pass the number of IE bytes available at the OUI list and bound the walk to the element. Keep the length signed and reject a negative value before any unsigned arithmetic, so a small or zero IE length cannot underflow to a large size_t and defeat the bound. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-98364 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: hold net_device reference under RCU in bundle creation xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into a local pointer without taking a device reference, then pass it to xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via dst_dev_put() and frees the old net_device, causing a use-after-free when xfrm6_fill_dst() later dereferences the stale dev pointer. BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860 (net/ipv6/xfrm6_policy.c:86 netdev_hold()) Read of size 8 at addr ffff8880142fe588 by task exploit/153 Call Trace: xfrm6_fill_dst+0x82c/0x860 xfrm_resolve_and_create_bundle+0x21d4/0x2bd0 xfrm_lookup_with_ifid+0x485/0x1640 ip6_dst_lookup_flow+0x19b/0x1e0 udpv6_sendmsg+0x1443/0x2dd0 Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU read-side critical section active until xfrm_fill_dst() has taken the required device references. | ||||
| CVE-2026-98101 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source() pmc->sflist is read locklessly under rcu_read_lock() by inet6_mc_check() during packet reception in the UDP and RAW multicast receive paths. ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place when adding or removing a source filter. Additionally, when expanding the filter buffer, newpsl was published via rcu_assign_pointer() before writing the new source into the array. Because 16-byte struct in6_addr writes are not atomic and array shifting is not synchronized with RCU readers, concurrent readers in inet6_mc_check() could read torn IPv6 addresses or observe duplicated/missed source entries. Fix this by switching ip6_mc_source() to copy-on-write RCU updates: allocate and fully populate newpsl before publishing it via rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(), matching ip6_mc_msfilter(). Also remove the now unused IP6_SFBLOCK macro. | ||||
| CVE-2026-98239 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix RX checksum use-after-free lan743x_rx_process_buffer() adds each non-first receive buffer to the head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb() linearizes the head and frees the fragment skb metadata. The checksum-success path then writes ip_summed through the local skb pointer, which still points to the final fragment. This causes a use-after-free write when a packet spans more than one receive buffer. Set ip_summed on the surviving head skb instead. Multi-buffer receive can occur after a live MTU increase because existing ring entries keep their old buffer size until they are replenished. A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer packet produced a one-byte KASAN use-after-free write before this change. The same test passed after the change. The driver object also builds with W=1. This was not tested on physical LAN743x hardware. | ||||
| CVE-2026-98241 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm: use full sockets in local error paths xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it always pointed at a full IPv6 socket. That is not guaranteed. TCP SYN-ACK skbs can be owned by a TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower MTU, the local PMTU/error handling path can reach these callbacks with that mini-socket still attached to the skb. The callbacks then miscast the request socket as a full inet/IPv6 socket and can read beyond the request_sock allocation when they access inet_sock or ipv6_pinfo state. Resolve the owner with skb_to_full_sk() in both callbacks and bail out when no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error logic, which already reasons about full sockets with skb_to_full_sk(). | ||||
| CVE-2026-98282 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba(). While doing so, the passed in argument npages is ignored and constant value '1' is used leaving out a possible overflow as the callers can legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT cases. Fix this by accounting for 'npages', checking for arithmetic overflow, and verifying that the entire requested range (ioba - offset + npages) does not exceed the table capacity 'size'. | ||||
| CVE-2026-98243 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3 The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference" changed the check to test for the ops pointer instead of the signaled bit to avoid a potential NULL dereference when the ops pointer has been cleared. The problem is now that the ops pointer is cleared only when neither the release nor the wait callback is implemented and this isn't true for a lot of dma_fence implementations yet. So those implementations lost the RCU protection after signaling of the returned string resulting in potential use after free. Add the signaling check additional to the ops pointer check so that we have both the protection against NULL dereference as well as the RCU protection after signaling for the returned string. v2: improve comments to note RCU protection and explain why we check both signaling state and ops pointer v3: some comment improvements suggested by Philip | ||||
| CVE-2026-98251 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: avoid reallocating confirmed conntrack labels ovs_ct_get_conn_labels() adds the labels extension when a conntrack entry does not have one. Confirmed conntracks can be read locklessly, so adding an extension may reallocate and free the extension block while another CPU accesses it. Only add the extension for unconfirmed conntracks. A confirmed conntrack without labels now fails the caller's label operation instead of reallocating its extension storage. | ||||
| CVE-2026-98256 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: signal: Prevent exec() race Hyunwoo debugged the following KASAN UAF splat: BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0 Write of size 8 at addr ffff888007ed80c8 by task poc/79 ... Call Trace: __send_signal_locked+0xb27/0xba0 do_send_sig_info+0xa7/0x160 do_send_specific+0x76/0xa0 __x64_sys_tgkill+0x193/0x270 ... Allocated by task 80: do_timer_create+0x1a4/0x1030 __x64_sys_timer_create+0x145/0x190 ... Freed by task 12: kmem_cache_free_bulk+0x1f8/0x4a0 kvfree_rcu_bulk+0x14f/0x1c0 kfree_rcu_work+0x128/0x1a0 ... Last potentially related work creation: kvfree_call_rcu+0x39/0x390 __flush_itimer_signals+0x211/0x320 flush_itimer_signals+0x47/0x90 begin_new_exec+0xa6b/0x28c0 It turned out that this happens with a non-leader exec() as Hyunwoo explained: de_thread() calls exchange_tids() before release_task(leader), so the struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid now points to the thread which called execve(). pid_task() returns that thread and lock_task_sighand() on it succeeds. If the timer signal is blocked, its sigqueue stays queued on the leader's task::pending. The next expiry of that timer can then run while release_task() flushes the queue. posixtimer_send_sigqueue() checks whether the sigqueue is already queued with a plain list_empty(), which only reads list_head::next. list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next before list_head::prev, so the check can pass in between. list_add_tail() queues the entry on the task::pending of the live thread, and the list_head::prev store from the flush then overwrites the list_head::prev link that list_add_tail() has just set. __flush_itimer_signals() does not undo that either. With list_head::prev pointing at the entry itself, its list_del_init() only stores the same values again, so the entry is not removed from the list. It is still there after the last reference is dropped and the timer is freed by RCU, and the list_add_tail() of a later tgkill() follows that list_head::prev into the freed timer. This problem surfaced with the recent commit which moved the sigqueue flush out of the sighand lock held region. Hyonwoo proposed to fix this by using list_del_init_careful(), but that just papers over the problem. After some disucssions and various attempts to solve it, Eric pointed out that there is no reason to flush task::pending late in release_task() and it should be done in exit_signals() already. As nothing can collect and deliver signals which are queued in a dying task's pending queue, there is no reason to delay it further. But it has to be ensured that no signals can be queued into it after that point. exit_signals() sets PF_EXITING in task::flags, which can be used as an indicator for this. Cure it by: - Preventing signal queueing for task private signals (PIDTYPE_PID) when the task has PF_EXITING set in __send_signal_locked() and in posixtimer_send_sigqueue(). - Protecting the unlocked setting of PF_EXITING in exit_signals() for the task group empty and the group exit case with sighand lock - Flushing task::pending signals right there. Optimize that by moving the whole pending list to an on-stack list head under sighand lock and free the signals without the lock held. There has been quite some discussion about the lockless flush and the non-leader exec case on weakly ordered systems. The problem is that a third party which tries to send a posix timer signal relies on the PID lookup to find the target task and that lookup might result in the new leader when the signal was originaly directed to the old leader. In case that the signal was queued on the old leader then the lockless flush raised a concern over the following situation: old_leader new_leader third party A: flush_list() // list_del_in ---truncated--- | ||||
| CVE-2026-98318 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate absolute native symlink targets before NT fixups With symlinkroot unset, an absolute target is copied without conversion to an NT drive path. Later code still assumes an NT prefix is present when modifying the target and calculating the print name length. For "/ab", this causes two failures: sym[5] and path[5] are written past their allocations, and plen -= 2 * poff subtracts an assumed 8-byte prefix from a 6-byte UTF-16 target, wrapping u16 plen to 65534. That underflow causes another overflow: memcpy() copies 65534 bytes into a 24-byte buffer. A user with write access to a mounted share can trigger these bugs with default settings. Validate the NT drive prefix, including an ASCII drive letter, before accessing fixed offsets or subtracting the prefix length. | ||||
| CVE-2026-98320 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: hold reference on ct until flow is released nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe semantics also allow to refer to the wrong conntrack from the flowtable datapath. Hold reference on ct until flow is released after rcu grace period. Add rcu_barrier() on module exit path, to ensure pending flow entries are release before module goes away. | ||||
| CVE-2026-98366 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: validate access flags before swapping the MR's PD rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then validates the IB_MR_REREG_ACCESS argument: if (flags & IB_MR_REREG_PD) { rxe_put(old_pd); rxe_get(pd); mr->ibmr.pd = ibpd; } if (flags & IB_MR_REREG_ACCESS) { if (access & ~RXE_ACCESS_SUPPORTED_MR) return ERR_PTR(-EOPNOTSUPP); mr->access = access; } Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access check with mr->ibmr.pd already reassigned. mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error without undoing the reassignment, so mr->pd == new_pd while the usecnts still charge the MR to orig_pd. ib_dereg_mr_user() then decrements new_pd, whose count can reach zero while a memory window still references it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup() writes to freed memory: BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0 Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591 __rxe_put+0x31/0xa0 rxe_mw_cleanup+0x42/0x200 __rxe_cleanup+0x115/0x370 rxe_dealloc_mw+0x4c/0x80 Allocated by task 591: ib_uverbs_alloc_pd+0x258/0x540 Freed by task 591: ib_dealloc_pd_user+0x174/0x210 uverbs_free_pd+0x8d/0xc0 ib_uverbs_dealloc_pd+0x18e/0x1d0 Validate the access flags before mutating any state so the callback either applies every requested change or none. | ||||
| CVE-2026-98362 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate dvfs_get_idx() may return an out-of-range index if the SCP firmware is buggy or returns a stale value. Only negative indexes were rejected, so a large index walked past info->opps and could treat garbage as a clock rate (KASAN OOB / wrong frequency to consumers). The missing upper bound dates back to the original SCPI clock driver. Treat indexes >= opp count as invalid and return 0, same as idx < 0. | ||||
| CVE-2026-98371 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix runt reassembly panic from short inner tot_len When the start of an inner packet is split across two outer packets such that fewer than 4 bytes land at the end of the first one, __input_process_payload() saves those bytes as a runt and skips the iplen/iphlen validation performed for in-place packets. When the continuation packet arrives, iptfs_reassem_cont() only requires the declared inner length to be >= sizeof(ra_runt) (6) before allocating the reassembly skb with that attacker-controlled length. However, __iptfs_iphlen() always returns the fixed minimum IP header size (20 for IPv4, 40 for IPv6), so for an inner IPv4 tot_len in [6, 19] the header-completion copy writes past the declared packet length, and the subsequent "ipremain -= copylen" underflows to ~4GB, leaving the payload copy length bounded only by blkoff (up to 64KB). At runtime the skb_put() tailroom check turns this into skb_over_panic(), i.e. an unprivileged kernel panic (DoS), reachable locally via userns+netns IPTFS SAs and remotely against IPTFS VPN gateways when the decrypted outer skb is linear (e.g. AF_PACKET taps, tun/tap delivery). Align the runt path with the normal path by requiring the declared inner length to cover at least the IP header size. This also subsumes the previous >= sizeof(ra_runt) check, since the minimum IP header is always larger than the runt buffer. This issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. | ||||
| CVE-2026-93225 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: fsl-imx8mq-usb: fix typec switch leak on probe error path If probe fails after imx95_usb_phy_get_tca() succeeds, the typec switch leaks because the only cleanup path was in .remove(), which never runs on probe failure. Use devm_add_action_or_reset() so the switch is cleaned up on both probe failure and driver removal. The imx95_usb_phy_put_tca() is no longer needed, it will be removed in .remove() too. | ||||