Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409268 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63987 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries). | ||||
| CVE-2026-63985 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc. | ||||
| CVE-2026-63984 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress() ipv6_rpl_srh_decompress() computes: outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3); hdrlen is __u8. For n >= 127 the result exceeds 255 and silently truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16): (128 * 16) >> 3 = 256, truncated to 0 as __u8 The caller in ipv6_rpl_srh_rcv() then places the compressed header at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8, but the decompressed region occupies buf[0..2055] (8-byte header plus 128 full addresses). The compressed header overlaps the decompressed data, and ipv6_rpl_srh_compress() writes into this overlap, corrupting the routing header of the forwarded packet. The existing guard at exthdrs.c:546 checks (n + 1) > 255, which prevents n+1 from overflowing unsigned char (the segments_left field), but does not prevent the computed hdrlen from overflowing __u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not fit. Tighten the bound to (n + 1) > 127. This caps n at 126, giving hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly past the decompressed region (buf[0..2039]). No overlap. 127 segments is well beyond any realistic RPL deployment. | ||||
| CVE-2026-63980 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: Use spin_lock_bh for hn_lock nvmet_tcp_state_change(), a socket callback that runs in BH context, can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue() and tls_handshake_cancel(). handshake_req_cancel() acquires hn->hn_lock with plain spin_lock(). If a process-context thread on the same CPU holds hn->hn_lock when a softirq invokes the cancel path, the lock attempt deadlocks. This is the only caller that invokes tls_handshake_cancel() from BH context; every other consumer calls it from process context. Deferring the cancel to process context in the NVMe target is not straightforward: nvmet_tcp_schedule_release_queue() must call tls_handshake_cancel() atomically with its state transition to DISCONNECTING. If the cancel were deferred, the handshake completion callback could fire in the window before the cancel runs, observe the unexpected state, and return without dropping its kref on the queue. Reworking that interlock is considerably more invasive than hardening the handshake lock. Convert all hn->hn_lock acquisitions from spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is never taken with softirqs enabled. | ||||
| CVE-2026-63979 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: hand off the pinned file reference to accept_doit handshake_req_next() removes the request from the per-net pending list and drops hn_lock before handshake_nl_accept_doit() reads req->hr_sk->sk_socket and dereferences sock->file (once in FD_PREPARE() and again in get_file()). In that window a consumer running tls_handshake_cancel() followed by sockfd_put() (svc_sock_free) or __fput_sync() (xs_reset_transport) releases sock->file. sock_release() then runs sock_orphan(), zeroing sk_socket, and frees the struct socket. The accept-side code either reads NULL through sk_socket or chases freed memory. The submit-side sock_hold() does not prevent this. sk_refcnt protects struct sock, but struct socket and sock->file are independently refcounted via the file descriptor the consumer owns. Pinning sk leaves sock and sock->file unprotected. Retarget the accept-side dereferences at req->hr_file, which was pinned at submit time, instead of req->hr_sk->sk_socket->file. Pinning on its own is not sufficient: a consumer that cancels between handshake_req_next() returning and accept_doit reaching FD_PREPARE() takes the !remove_pending() branch in handshake_req_cancel() and drops hr_file before the accept side takes its own reference. Hand off an additional file reference inside handshake_req_next(), under hn_lock, so the accept side operates on a reference that no concurrent handshake_req_cancel() can revoke. FD_PREPARE() consumes that handed-off reference, either by transferring it to the new fd in fd_publish() or by dropping it in the cleanup destructor on error; the explicit get_file() that previously balanced FD_PREPARE() is therefore redundant and goes away. Update handshake_req_cancel_test2 and _test3 to simulate the FD_PREPARE() consumption with an fput() so the kunit file-count assertions stay balanced. | ||||
| CVE-2026-59508 | 1 Interuse | 1 I-bos | 2026-10-16 | 5.9 Medium |
| Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Interuse i-Bos. This issue affects i-Bos: 3.0. | ||||
| CVE-2026-57486 | 2026-10-16 | 7.5 High | ||
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, ixmlNode_compare in ixml/src/node.c passes the nullable nodeValue, namespaceURI, prefix, and localName fields directly to strcmp. Non-namespaced attributes created by ixmlDocument_createAttribute legitimately leave those fields NULL. When ixmlElement_removeAttributeNode compares two distinct attribute objects with the same nodeName through find_condition_node, the pointer-identity shortcut does not apply and the comparison dereferences NULL, causing a process crash when application handling of attacker-controlled XML reaches this path. This issue is fixed in 2.0.2. | ||||
| CVE-2026-46174 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache Make sure resources are not improperly shared in the op cache and cause instruction corruption this way. | ||||
| CVE-2026-46173 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exit: prevent preemption of oopsing TASK_DEAD task When an already-exiting task oopses, make_task_dead() currently calls do_task_dead() with preemption enabled. That is forbidden: do_task_dead() calls __schedule(), which has a comment saying "WARNING: must be called with preemption disabled!". If an oopsing task is preempted in do_task_dead(), between becoming TASK_DEAD and entering the scheduler explicitly, bad things happen: finish_task_switch() assumes that once the scheduler has switched away from a TASK_DEAD task, the task can never run again and its stack is no longer needed; but that assumption apparently doesn't hold if the dead task was preempted (the SM_PREEMPT case). This means that the scheduler ends up repeatedly dropping references on the dead task's stack, which can lead to use-after-free or double-free of the entire task stack; in other words, two tasks can end up running on the same stack, resulting in various kinds of memory corruption. (This does not just affect "recursively oopsing" tasks; it is enough to oops once during task exit, for example in a file_operations::release handler) | ||||
| CVE-2026-46166 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use safe list iteration in radar detect work The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to be freed and removed from the list. Guard against this to avoid a slab-use-after-free error. | ||||
| CVE-2026-46155 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in smb2_compound_op() If a server sends a truncated response but a large OutputBufferLength, and terminates the EA list early, check_wsl_eas() returns success without validating that the entire OutputBufferLength fits within iov_len. Then smb2_compound_op() does: memcpy(idata->wsl.eas, data[0], size[0]); Where size[0] is OutputBufferLength. If iov_len is smaller than size[0], memcpy can read beyond the end of the rsp_iov allocation and leak adjacent kernel heap memory. | ||||
| CVE-2026-46152 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop stray 'static' from fast-RX rx_result ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but its per-invocation rx_result is declared static. Concurrent callers then share one instance and can overwrite each other's result between ieee80211_rx_mesh_data() and the switch on res. That can make a packet that was queued or consumed by ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make a packet that should continue return as queued. Make res an automatic variable so each invocation keeps its own result. | ||||
| CVE-2026-46150 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fanotify: fix false positive on permission events fsnotify_get_mark_safe() may return false for a mark on an unrelated group, which results in bypassing the permission check. Fix by skipping over detached marks that are not in the current group. | ||||
| CVE-2026-46149 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show() target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a 256-byte stack buffer, then will memcpy() cur_len bytes from that buffer. snprintf() returns the length the output would have had, which can exceed the buffer size when the fabric WWN is long because iSCSI IQN names can be up to 223 bytes. The check at the memcpy() site only guards the destination page write, not the source read, so memcpy() will read past the stack buffer and copy adjacent stack contents to the sysfs reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic() will be triggered. Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length check to avoid buffer overflow") added the same bound to the target_lu_gp_members_show() but the tg_pt_gp variant was missed so resolve that here. | ||||
| CVE-2026-46145 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow. | ||||
| CVE-2026-46138 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly. | ||||
| CVE-2026-46137 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: fix potential data-race This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer. | ||||
| CVE-2026-46135 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix race between ICReq handling and queue teardown nvmet_tcp_handle_icreq() updates queue->state after sending an Initialization Connection Response (ICResp), but it does so without serializing against target-side queue teardown. If an NVMe/TCP host sends an Initialization Connection Request (ICReq) and immediately closes the connection, target-side teardown may start in softirq context before io_work drains the already buffered ICReq. In that case, nvmet_tcp_schedule_release_queue() sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue reference under state_lock. If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and allows a later socket state change to re-enter teardown and issue a second kref_put() on an already released queue. The ICResp send failure path has the same problem. If teardown has already moved the queue to DISCONNECTING, a send error can still overwrite the state with NVMET_TCP_Q_FAILED, again reopening the window for a second teardown path to drop the queue reference. Fix this by serializing both post-send state transitions with state_lock and bailing out if teardown has already started. Use -ESHUTDOWN as an internal sentinel for that bail-out path rather than propagating it as a transport error like -ECONNRESET. Keep nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before honoring that sentinel so receive-side parsing stays quiesced until the existing release path completes. | ||||
| CVE-2026-46133 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject unknown opcodes before ICRC processing Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv"), a single unauthenticated UDP packet can still trigger panic. That patch handled payload_size() underflow only for valid opcodes with short packets, not for packets carrying an unknown opcode. The unknown-opcode OOB read described below predates that commit and reaches back to the initial Soft RoCE driver. The check added there reads pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The rxe_opcode[] array has 256 entries but is only populated for defined IB opcodes; any other entry (for example opcode 0xff) is zero-initialized, so length == 0 and the check degenerates to pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES which underflows when length == 0 and passes a huge value to rxe_crc32(), causing an out-of-bounds read of the skb payload. Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after rdma link add rxe0 type rxe netdev eth0 A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and QPN=IB_MULTICAST_QPN triggers: BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170 Read of size 1 at addr ... The buggy address is located 0 bytes to the right of allocated 704-byte region Call Trace: crc32_le+0x115/0x170 rxe_icrc_hdr.isra.0+0x226/0x300 rxe_icrc_check+0x13f/0x3a0 rxe_rcv+0x6e1/0x16e0 rxe_udp_encap_recv+0x20a/0x320 udp_queue_rcv_one_skb+0x7ed/0x12c0 Subsequent packets with the same shape fault on unmapped memory and panic the kernel. The trigger requires only module load and "rdma link add"; no QP, no connection, and no authentication. Fix this by rejecting packets whose opcode has no rxe_opcode[] entry, detected via the zero mask or zero length, before any length arithmetic runs. | ||||
| CVE-2026-46125 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs. | ||||