Export limit exceeded: 108583 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (108583 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97910 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sprd: validate compress buffer sizes against fixed allocations sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but sprd_platform_compr_copy() derives all copy lengths from the user controlled runtime->fragment_size and the write() count, never comparing them against the physical buffer sizes. The compress core only checks fragment_size * fragments for an u32 overflow in snd_compress_check_input(), so a local user can configure a logical buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the fixed allocations. A fragment_size larger than the 32K IRAM data area makes the stage 0 copy_from_user() overflow past the IRAM allocation, and a buffer_size larger than the 2M DDR buffer makes the wrapping copy at the end of sprd_platform_compr_copy() write fully user controlled data past the buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP state reaches the copy callback directly. Reject parameters that do not fit into the fixed buffers in set_params(), and fix the advertised max fragment size: 128K never fitted into the 32K IRAM buffer. The caps values may have been carried over from the qdsp6 driver, which allocates its buffers according to the advertised maxima, unlike this driver. With 32K as max fragment size the advertised limits are self-consistent: 32K * 64 = 2M equals the DDR buffer size. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-97620 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches emit_render_cache_flush() sets PIPE_CONTROL0_HDC_PIPELINE_FLUSH to flush the L2/HDC data cache before fence signalling, but it never requests a flush of the LSC untyped L1 data cache via the 'Untyped Data-Port Cache Flush Enable' bit in PIPE_CONTROL DWord0[11]. Per the Bspec, in 3D pipeline mode HDC Pipeline Flush is documented to also flush/invalidate the untyped L1 cache, but only depending on how HDC_CHICKEN0[13:11] is programmed. Starting with MTL, this coupling between HDC Pipeline Flush and the untyped L1 cache flush no longer holds in practice, regardless of how HDC_CHICKEN0 is programmed, so relying on it is not safe on newer platforms such as BMG. Mesa's Vulkan driver (anv) has been assuming the kernel flushes both caches between submissions, and hit user-visible corruption in apps such as Llama.cpp because of this gap; it now works around it by flushing both caches again from userspace at the end of every command buffer. Correctness between submissions on the same queue is userspace's responsibility and belongs in Mesa, not the kernel. However, for security we must ensure stale data can't leak through the untyped L1 dataport cache once memory is reclaimed or evicted, which requires the KMD to flush it before releasing memory for reuse. Prior to MTL, HDC_CHICKEN0 could be programmed (as already done for DG2 via Wa_22010960976/Wa_14013347512) to reliably keep HDC Pipeline Flush coupled to the untyped L1 cache flush, so those platforms are unaffected. Mesa's own anv driver found that on MTL the HW disconnected the two independently of how HDC_CHICKEN0 is programmed, and could not bring the old behavior back even by writing the register by hand; see Mesa commit 7c2ff46a4fc3 ("anv: don't prevent L1 untyped cache flush in 3D mode"). The kernel can't reliably request the flush from the CS on MTL either, so restrict the new PIPE_CONTROL bit to GRAPHICS_VERx100 >= 2000 (Xe2 and later), where it can be relied on. Explicitly set PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH together with PIPE_CONTROL0_HDC_PIPELINE_FLUSH in emit_render_cache_flush() on Xe2 and later, so the L1 data cache is known clean before memory is released for reuse, without depending on undocumented platform-specific HDC_CHICKEN0 behavior. Bspec: 56551 (cherry picked from commit 434514b6fe731e873808297c268fc52cdf4a1ce6) | ||||
| CVE-2026-97612 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mpls: clear inner_protocol when the last label is popped skb_mpls_push() records the pre-encapsulation network header once, gated on !skb->inner_protocol. skb_mpls_pop() never clears that record, so it outlives the encapsulation it describes. Open vSwitch can then re-push MPLS onto a packet whose inner_network_header still points at the older, deeper offset: push a label, pop every label, recirculate (ovs_flow_key_update() re-derives key->eth.type and resets network_header, but leaves inner_*), then push again. ovs_fragment() trusts the record: skb->network_header = skb->inner_network_header; so skb_network_offset() goes negative. The bound check is signed: if (skb_network_offset(skb) > MAX_L2_LEN) a negative offset passes it, and prepare_frag() widens the value: unsigned int hlen = skb_network_offset(skb); memcpy(&data->l2_data, skb->data, hlen); which is a ~4GiB memcpy out of a 30-byte per-CPU buffer. Reproduced on v7.3-rc1. RDX is the truncated length, (unsigned int)(-8): BUG: unable to handle page fault for address: ffffe8ffffc16000 #PF: supervisor write access in kernel mode Oops: 0002 [#1] SMP KASAN NOPTI RIP: 0010:memcpy+0x8/0x20 RDX: 00000000fffffff8 RSI: ffff888105d732db RDI: ffffe8ffffc16000 prepare_frag+0x3df/0x4e0 ovs_fragment+0x589/0x7e0 do_output+0x4ce/0x5e0 do_execute_actions+0x55d2/0x7b30 ovs_execute_actions+0xea/0x450 Same root-cause shape as commit 975b5b067f52 ("ipv6: sr: restore network header before routing and forwarding"): a stale network header offset reaching a consumer that widens it. Here it originates in the MPLS push/pop path. Clear inner_protocol once the packet is no longer MPLS, so a later push re-records the current header. net/sched/act_mpls.c is the only other skb_mpls_pop() caller and gets the same fix; sch_frag.c saves and restores inner_protocol around fragmentation in the same way OVS does. | ||||
| CVE-2026-97611 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix use-after-free of the flow table mask array tbl_mask_array_realloc() retires the old mask_array before it stops being reachable: old = ovsl_dereference(tbl->mask_array); if (old) { ... call_rcu(&old->rcu, mask_array_rcu_cb); } rcu_assign_pointer(tbl->mask_array, new); call_rcu() only waits for read-side critical sections already in flight. tbl->mask_array still points at old between the call_rcu() and the rcu_assign_pointer(), so a reader entering ovs_flow_tbl_lookup_stats() in that window picks up old in a fresh critical section that the pending grace period does not cover. tbl_mask_array_realloc() runs in process context under ovs_mutex, so the window is preemptible and can outlast the grace period. Then mask_array_rcu_cb() frees old before the swap runs: BUG: KASAN: slab-use-after-free in flow_lookup.constprop.0+0x2bf/0x2f0 Read of size 8 at addr ffff888020b3e018 by task poc/741 flow_lookup.constprop.0+0x2bf/0x2f0 ovs_flow_tbl_lookup_stats+0x4a3/0x5c0 ovs_dp_process_packet+0x19c/0x710 ovs_vport_receive+0x243/0x390 internal_dev_xmit+0x81/0x170 Freed by task 728: kfree+0x16a/0x4e0 rcu_core+0x853/0x1030 Publish the new array before retiring the old one. The kfree_rcu() that call_rcu() replaced ran after the swap. | ||||
| CVE-2026-97608 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_log: unregister loggers before per-net teardown nf_log_syslog and nfnetlink_log unregister their per-network namespace operations before unregistering their global logger backends. This leaves a window where a sysctl or netlink writer can rebind the still- registered logger after the per-net pre-exit callback cleared the old selection. The race looks like this: CPU 0 CPU 1 ---- ---- unregister_pernet_subsys() nf_log_unset(net, logger) net->nf.nf_loggers[pf] = NULL lock nf_log_mutex find logger in loggers[][] net->nf.nf_loggers[pf] = logger unlock nf_log_mutex nf_log_unregister(logger) lock nf_log_mutex loggers[pf][type] = NULL unlock nf_log_mutex synchronize_rcu() module exit returns module core frees backend memory Later, a sysctl read or packet logging operation can dereference the stale per-net logger pointer. Fix this by unregistering the global logger backends before tearing down per-net state. Once the global registrations are gone, later writers can no longer rebind the logger. unregister_pernet_subsys() already waits for an RCU grace period after the pre-exit callback clears the per-net selection, while nf_log_unregister() continues to cover readers of the global logger table. Apply this ordering fix to both nf_log backends that combine per-net teardown with global logger registration. | ||||
| CVE-2026-97602 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: invalidate queues before flushing them fqdir_pre_exit() flushes the skbs from incomplete queues without changing their completion state. A fragment which found a queue before high_thresh was cleared can then acquire the queue lock and reuse stale reassembly metadata. A queue concurrently killed after fqdir->dead is set can instead become INET_FRAG_COMPLETE|INET_FRAG_HASH_DEAD while still holding its old skbs; skipping it because it is complete leaves those references behind until asynchronous fqdir teardown. For IPv6, stale metadata can make ip6_frag_reasm() use the old nhoffset with a new skb and access memory out of bounds. The resulting heap corruption can be leveraged for local privilege escalation when unprivileged network namespaces are available. Unflushed fragments can also keep conntrack references alive after the conntrack per-net cleanup point. Kill each incomplete queue, then flush every queue still owned by the dying rhashtable. HASH_DEAD identifies that ownership, while complete queues without it are already owned by another destroy path and must be left alone. Releasing a timer reference removed by inet_frag_kill() is deferred to inet_frag_putn(), after the queue lock is dropped. KASAN report: BUG: KASAN: slab-out-of-bounds in ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) Write of size 1 at addr ff110001039c6e00 by task poc/771 Call Trace: ? ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479 (discriminator 5)) ip6_input_finish (net/ipv6/ip6_input.c:534) ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3)) packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) The buggy address belongs to the object at ff110001039c6b40 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 0 bytes to the right of allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) Read of size 1 at addr ff110001039c6e08 by task poc/771 Call Trace: ? ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) ip6_input_finish (net/ipv6/ip6_input.c:534) ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3)) packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) packet_sendmsg (net/packet/af_packet.c:2959 net/packet/af_packet.c:3053 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) The buggy address belongs to the object at ff110001039c6b40 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 8 bytes to the right of allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) | ||||
| CVE-2026-97595 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: fix use-after-free of sdata via queued RX frames The RX softirq producer ieee802154_subif_frame() queues received beacon and MAC-command frames onto local->rx_beacon_list / rx_mac_cmd_list and schedules a process-context worker, storing a raw mac_pkt->sdata (and skb->dev == sdata->dev) with neither a reference nor any locking: - the lists have no lock: the softirq producer list_add_tail()s while the mac_wq worker list_del()s, so sibling interfaces on the same phy corrupt the list; - the workers dereference the interface after it may have been freed. mac802154_rx_mac_cmd_worker() touches mac_pkt->sdata directly, and mac802154_rx_beacon_worker() -> mac802154_process_beacon() dereferences skb->dev (== sdata->dev). Removing an interface frees its sdata (netdev_priv) while a queued frame still points at it, so a later worker run is a use-after-free. Reproduced under KASAN by flooding a victim interface with MAC command frames and removing it (the beacon path is the same class via skb->dev): BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] Read of size 4 at addr ffff888002f9ea18 by task kworker/u8:1/31 Workqueue: phy0-mac-cmds mac802154_rx_mac_cmd_worker [mac802154] Call Trace: mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] process_one_work+0x611/0xe80 worker_thread+0x52e/0xdc0 kthread+0x30c/0x630 ret_from_fork+0x2fd/0x3e0 Fix both lists together: - add local->rx_lock and take it around every list access: the softirq producer (plain spin_lock, softirq context) and the workers and flush (spin_lock_bh, process context); - pin the interface for the lifetime of a queued frame with netdev_hold()/netdev_put(), so the worker can safely dereference sdata / skb->dev even while the interface is being removed; - dequeue under the lock at the head and loop-drain the whole list in the workers (they previously processed one frame per run and relied on a later enqueue to drain the rest); - drop not-yet-started frames of an interface before it is unregistered, from ieee802154_if_remove() (after the RCU grace period) and from the ieee802154_remove_interfaces() loop -- the latter is the whole-phy teardown path, which does not go through ieee802154_if_remove(). An in-flight worker that already dequeued a frame keeps its own netdev reference; unregister_netdevice() then waits it out in netdev_run_todo(), which runs at rtnl_unlock() (rtnl released) and after the interface has been closed, so it does not pin rtnl. A worker blocked in an association TX only delays that one interface's unregister (the usual "waiting for %s to become free"), it does not hold rtnl. netdev_hold() is used for this reason instead of a cancel_work_sync() under rtnl, which would block on the worker's unbounded MLME TX wait via ieee802154_sync_queue(). The mac-command worker additionally skips processing for a stopped interface (ieee802154_sdata_running()), avoiding a needless association response during teardown. | ||||
| CVE-2026-97579 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound the copy to the array capacity. | ||||
| CVE-2026-97578 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by tile_info->tile_cols and writes one descriptor per tile into the tile_info DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows come from the bitstream. Guard the division against a zero tile_cols by initialising the context-update values to zero and computing them only when tile_cols is non-zero, and stop the descriptor writes once the tile_info buffer is full. The tile geometry written to the hardware registers is left unmodified; the per-dimension and total tile bounds are enforced by the control validation. | ||||
| CVE-2026-97577 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info buffer, and programs the real tile_cols / tile_rows into the hardware. The tile group entry control is a dynamic array sized to the number of entries userspace submitted, independent of tile_cols / tile_rows, so a frame that claims more tiles than entries reads past the array. A frame that claims more than AV1_MAX_TILES tiles also leaves the hardware programmed for more tiles than the descriptor buffer holds. Reject both in prepare_run(): tile_cols * tile_rows must not exceed the submitted entry count or AV1_MAX_TILES. The entry count is read via v4l2_ctrl_find() (ctrl->elems). This mirrors the bound the mediatek AV1 decoder already enforces. | ||||
| CVE-2026-97576 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks. | ||||
| CVE-2026-97575 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate AV1 tile counts The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[] arrays, as the divisor for context_update_tile_id, and their product bounds the per-tile descriptor buffers, but std_validate_compound() does not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the consuming driver so the zero-initialised control that existing userspace submits is still accepted. | ||||
| CVE-2026-97573 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle buffer allocation failure in bnxt_rx_ring_reset() bnxt_rx_ring_reset() frees the ring buffers and then reallocates them, ignoring the result. bnxt_alloc_one_rx_ring() can fail in bnxt_alloc_one_tpa_info_data(), which returns -ENOMEM on the first failed allocation and leaves the remaining rxr->rx_tpa[] entries zeroed. The error isn't propagated up, so the loop in bnxt_rx_ring_reset continues and at the end the code re-enables TPA with partially unallocated rx_tpa array. This means that when the agg_id from hardware is mapped to a SW index in rxr->rx_tpa[], an uninitialized slot can be chosen which would hand a zero DMA address to the device. Fix this by falling back to a global reset, which is what the existing code already does when other functions fail, but unlike the other failure cases this particular failure has to return because TPA can't be re-enabled since the allocation failed. | ||||
| CVE-2026-97562 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: pin DFS superblock in iterator callback tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super() takes its active reference only after iterate_supers_type() has dropped s_umount and its passive reference. Concurrent DFS automount expiry can therefore free the superblock before cifs_sb_active() uses it. A deterministic KASAN test reproduces the race as: BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80 The same test passes with this change applied. Take the active reference in the callback while iterate_supers_type() still holds s_umount shared. cifs_put_tcp_super() remains the matching release. | ||||
| CVE-2026-97524 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid unneeded actions on subflow reset Once in a blue moon, the mptcp receive path can recursively call mptcp_data_ready() via state change under unlucky error conditions, and then try to hold the data lock again. Break the recursion loop explicitly checking for the exceptional condition. Add a new flag instead of using an existing one like 'closing', to exit early in subflow_state_change(), and explicitly flush the RX queue at reset time. This avoids unneeded processing to check for available data -- calling get_mapping_status() and more on a dying subflow -- but also in error reporting and worker scheduling. Note that we must consume the currently peeked skb before invoking mptcp_dss_corruption to avoid consuming it again after the eventual reset has freed it. | ||||
| CVE-2026-97523 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: close race between scheduler and state change The mptcp scheduler may race with subflow sockets state change: data transmission on the selected socket may fail and a later release could try to use mss_now reset to 0 for a divide operation. Address the issue by explicitly checking for the critical scenario. | ||||
| CVE-2026-97509 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Keep XDomain reference during the lifetime of a service This is needed because we release the service ID in tb_service_release() and the ID array is owned by the parent XDomain. | ||||
| CVE-2026-97508 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Set tb->root_switch to NULL when domain is stopped Similarly what we do with the firmware connection manager. This makes tb_xdp_handle_request() return error to the remote host. However, we need to make sure we keep the uuid alive so that we can reply until the whole domain is released. | ||||
| CVE-2026-97497 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id allocate_sdma_queue has an option where the sdma queue id can be specified (used by CRIU). We weren't bounds-checking that value. Confirm it's less than the maximum number of queues. | ||||
| CVE-2026-97496 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix OOB memory exposure in get_wave_state() The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and cp_hqd_cntl_stack_offset values read directly from the MQD, which are written by GPU microcode and fully attacker-controlled on the CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3). this leads to an unbounded copy_to_user() that can leak adjacent GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB read length, if size is set to 1 MiB against a 4 KiB allocation, we leak 1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR pointers). Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the clamped size before performing arithmetic and copy_to_user(). This ensures we never read beyond the allocated kernel BO regardless of attacker-supplied MQD field values. | ||||