Export limit exceeded: 26045 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25952 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25952 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43219 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been registered yet If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly. | ||||
| CVE-2026-43010 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable kprobe_multi programs at attach time kprobe.multi programs run in atomic/RCU context and cannot sleep. However, bpf_kprobe_multi_link_attach() did not validate whether the program being attached had the sleepable flag set, allowing sleepable helpers such as bpf_copy_from_user() to be invoked from a non-sleepable context. This causes a "sleeping function called from invalid context" splat: BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 0 Fix this by rejecting sleepable programs early in bpf_kprobe_multi_link_attach(), before any further processing. | ||||
| CVE-2026-31755 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix NULL pointer dereference in ep_queue When the gadget endpoint is disabled or not yet configured, the ep->desc pointer can be NULL. This leads to a NULL pointer dereference when __cdns3_gadget_ep_queue() is called, causing a kernel crash. Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the standard return code for unconfigured endpoints. This prevents potential crashes when ep_queue is called on endpoints that are not ready. | ||||
| CVE-2026-31732 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: Fix resource leaks on errors in gpiochip_add_data_with_key() Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"), `gdev->dev.release` is unset. As a result, the reference count to `gdev->dev` isn't dropped on the error handling paths. Drop the reference on errors. Also reorder the instructions to make the error handling simpler. Now gpiochip_add_data_with_key() roughly looks like: >>> Some memory allocation. Go to ERR ZONE 1 on errors. >>> device_initialize(). gpiodev_release() takes over the responsibility for freeing the resources of `gdev->dev`. The subsequent error handling paths shouldn't go through ERR ZONE 1 again which leads to double free. >>> Some initialization mainly on `gdev`. >>> The rest of initialization. Go to ERR ZONE 2 on errors. >>> Chip registration success and exit. >>> ERR ZONE 2. gpio_device_put() and exit. >>> ERR ZONE 1. | ||||
| CVE-2026-23052 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Do not over-allocate ftrace memory The pg_remaining calculation in ftrace_process_locs() assumes that ENTRIES_PER_PAGE multiplied by 2^order equals the actual capacity of the allocated page group. However, ENTRIES_PER_PAGE is PAGE_SIZE / ENTRY_SIZE (integer division). When PAGE_SIZE is not a multiple of ENTRY_SIZE (e.g. 4096 / 24 = 170 with remainder 16), high-order allocations (like 256 pages) have significantly more capacity than 256 * 170. This leads to pg_remaining being underestimated, which in turn makes skip (derived from skipped - pg_remaining) larger than expected, causing the WARN(skip != remaining) to trigger. Extra allocated pages for ftrace: 2 with 654 skipped WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7295 ftrace_process_locs+0x5bf/0x5e0 A similar problem in ftrace_allocate_records() can result in allocating too many pages. This can trigger the second warning in ftrace_process_locs(). Extra allocated pages for ftrace WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7276 ftrace_process_locs+0x548/0x580 Use the actual capacity of a page group to determine the number of pages to allocate. Have ftrace_allocate_pages() return the number of allocated pages to avoid having to calculate it. Use the actual page group capacity when validating the number of unused pages due to skipped entries. Drop the definition of ENTRIES_PER_PAGE since it is no longer used. | ||||
| CVE-2022-50114 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: 9p: fix refcount leak in p9_read_work() error handling p9_req_put need to be called when m->rreq->rc.sdata is NULL to avoid temporary refcount leak. [Dominique: commit wording adjustments, p9_req_put argument fixes for rebase] | ||||
| CVE-2022-49803 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: Fix memory leak of nsim_dev->fa_cookie kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). | ||||
| CVE-2026-53336 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmem: layouts: onie-tlv: fix hang on unknown types The EEPROM on my board has a vendor specific entry of type 0x41. When stumbling upon that, this driver hangs in an endless loop. Fix it by keep incrementing the offset on unknown entries, so the loop will eventually stop. | ||||
| CVE-2026-53346 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: rust: arm64: set uwtable llvm module flag for CONFIG_UNWIND_TABLES Due to a rustc bug [1] the -Cforce-unwind-tables=y flag only emits the uwtable annotation for functions, but not for the module. This means that compiler-generated functions such as 'asan.module_ctor' do not receive the uwtable annotation. When CONFIG_UNWIND_PATCH_PAC_INTO_SCS is enabled, this leads to boot failures because the dwarf information emitted for the kasan constructors is wrong, which causes the SCS boot patching code to patch the constructor in an illegal manner. Specifically, the paciasp instruction is patched, but the autiasp instruction is not. This mismatch leads to a crash when the constructor is called during boot. ================================================================== BUG: KASAN: global-out-of-bounds in do_basic_setup+0x4c/0x90 Read of size 8 at addr ffffffe3cc7eb488 by task swapper/0/1 Specifically the faulting instruction is the (*fn)() to invoke the constructor in do_ctors() of the init/main.c file. Once the fix lands in rustc, this flag can be made conditional on the rustc version. Note that passing the flag on a rustc with the fix present has no effect. [ The fix [1] has landed for Rust 1.98.0 (expected release on 2026-08-20). Thus add a version check as discussed. - Miguel ] [ Adjusted link and comment. - Miguel ] | ||||
| CVE-2026-53342 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mm: call pagetable dtor when freeing hot-removed page tables Since 5e8eb9aeeda3 ("arm64: mm: always call PTE/PMD ctor in __create_pgd_mapping()") page-table allocation on ARM64 always calls pagetable_{pte,pmd,pud,p4d}_ctor(). This sets the page_type to PGTY_table, increments NR_PAGETABLE and possible allocates a PTL. However the matching pagetable_dtor() calls were never added. With DEBUG_VM enabled on kernel versions prior to v6.17 without 2dfcd1608f3a9 ("mm/page_alloc: let page freeing clear any set page type") this leads to the following warning when freeing these pages due to page->page_type sharing page->_mapcount: BUG: Bad page state in process ... pfn:284fbb page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x284fbb flags: 0x17fffc000000000(node=0|zone=2|lastcpupid=0x1ffff) page_type: f2(table) page dumped because: nonzero mapcount Call trace: bad_page+0x13c/0x160 __free_frozen_pages+0x6cc/0x860 ___free_pages+0xf4/0x180 free_pages+0x54/0x80 free_hotplug_page_range.part.0+0x58/0x90 free_empty_tables+0x438/0x500 __remove_pgd_mapping.constprop.0+0x60/0xa8 arch_remove_memory+0x48/0x80 try_remove_memory+0x158/0x1d8 offline_and_remove_memory+0x138/0x180 It can also lead to leaking the ptl allocation if ALLOC_SPLIT_PTLOCKS is defined and incorrect NR_PAGETABLE stats. Fix this by calling pagetable_dtor() in free_hotplug_pgtable_page() prior to freeing the page to undo the effects of calling pagetable_*_ctor(). | ||||
| CVE-2026-53333 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mincore: handle non-swap entries before !CONFIG_SWAP guard mincore_swap() also fields migration/hwpoison entries (and shmem swapin-error entries), which can exist on !CONFIG_SWAP builds when CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The !IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return, so mincore_pte_range() can spuriously WARN and report these pages nonresident on !CONFIG_SWAP kernels. Move the guard below the non-swap-entry check so only true swap entries trip the WARN, and migration/hwpoison entries take the existing "uptodate / non-shmem" path. | ||||
| CVE-2026-53343 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in __switch_to(). The read uses ldr, but the KASAN shadow address is byte-granular and is not guaranteed to be word aligned. ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to() with an alignment exception before reaching init. Use ldrb for the dummy shadow access. The code only needs to fault in the shadow mapping if the stack shadow is missing, so a byte load is sufficient and matches the granularity of KASAN shadow memory. | ||||
| CVE-2026-53347 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix driver removal with disabled KMS DRM atomic and modesetting aren't initialized if virtio-gpu driver built with disabled KMS, leading to access of uninitialized data on driver removal/unbinding and crashing kernel. Fix it by skipping shutting down atomic core with unavailable KMS. | ||||
| CVE-2026-53331 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock. | ||||
| CVE-2026-53351 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv/ptrace: Use USER_REGSET_NOTE_TYPE for REGSET_CFI Fixes a warning while dumping core: [54983.546369][ C7] WARNING: [!note_name] fs/binfmt_elf.c:1771 at elf_core_dump+0x910/0xf68, CPU#7: abort01/31982 | ||||
| CVE-2026-53328 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task() A WARN fires when systemd's user manager writes "+cpu +memory +pids" to its own subtree_control while a sched_ext scheduler is loaded: WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0 scx_cgroup_move_task+0xa8/0xb0 sched_move_task+0x134/0x290 cpu_cgroup_attach+0x39/0x70 cgroup_migrate_execute+0x37d/0x450 cgroup_update_dfl_csses+0x1e3/0x270 cgroup_subtree_control_write+0x3e7/0x440 scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu cgroup changes. It can still be NULL when scx_cgroup_move_task() runs, through this sequence: Step Result --------------------------------- ---------------------------------- 1. cpu enabled on cgroup G cpu css = A 2. cpu toggled off then on for G A killed, B created (same cgroup) 3. an exiting task keeps A alive migration skips it, A now stale 4. +memory migrates G stale A vs current B pulls cpu in 5. cpu attach runs for all tasks hits a live, cpu-unchanged task 6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN The mismatch is that scx_cgroup_can_attach() keys on cgroup identity while migration drives the move on css identity, so a NULL cgrp_moving_from here is a legitimate css-only migration, not a missing prep. The call is already gated on cgrp_moving_from, so just drop the warning. ops.cgroup_prep_move() and ops.cgroup_move() stay paired. | ||||
| CVE-2026-53340 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix clock and pinctrl state inconsistency in runtime PM In i2c_imx_runtime_suspend(), the clock is disabled before switching the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails, the runtime suspend is aborted but the clock remains disabled, causing a system crash when the hardware is subsequently accessed. Fix this by switching the pinctrl state before disabling the clock so that a pinctrl failure leaves the clock enabled and the hardware accessible. In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep if clk_enable() fails to keep the consistent. | ||||
| CVE-2026-53345 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying When marking a page dirty, complain about not having a running/loaded vCPU if and only if the VM is still alive, i.e. its refcount is non-zero. This will allow fixing a memory leak for x86 SEV-ES guests without hitting what is effectively a false positive on the WARN. For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page across an exit to userspace, and typically unmaps the page on the next KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM needs to unmap the page when the vCPU is destroyed, which in turn triggers the WARN about not having a running vCPU. Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN, as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons; suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But loading a vCPU during destruction is gross (ideally nVMX code would be cleaned up), risks complicating the SEV-ES code (KVM would need to ensure the temporarily load()+put() only runs when the vCPU isn't already loaded), and is ultimately pointless. The motivation for the WARN is to guard against KVM dirtying guest memory without pushing the corresponding GFN to the active vCPU's dirty ring, e.g. to ensure userspace doesn't miss a dirty page. But for the VM's refcount to reach zero, there can't be _any_ userspace mappings to the dirty ring, as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if userspace had a valid mapping for the dirty ring, then the vCPU file and thus the owning VM would still be alive. And so since userspace can't possibly reach the dirty ring, whether or not KVM technically "misses" a push to the dirty ring is irrelevant. | ||||
| CVE-2026-53353 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hsr: Remove WARN_ONCE() in hsr_addr_is_self(). syzbot reported the warning [0] in hsr_addr_is_self(), whose assumption is simply wrong. hsr->self_node is cleared in hsr_del_self_node(), which is called from hsr_dellink(). Since dev->rtnl_link_ops->dellink() is called before unregister_netdevice_many(), there is a window when user can find the device but without hsr->self_node. Let's remove WARN_ONCE() in hsr_addr_is_self(). [0]: HSR: No self node WARNING: net/hsr/hsr_framereg.c:39 at hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39, CPU#0: syz.4.16848/17220 Modules linked in: CPU: 0 UID: 0 PID: 17220 Comm: syz.4.16848 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 RIP: 0010:hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39 Code: 33 2f 41 0f b7 dd 89 ee 09 de 31 ff e8 c8 b4 c6 f6 09 dd 74 54 e8 0f b0 c6 f6 31 ed eb 53 e8 06 b0 c6 f6 48 8d 3d 2f 50 9c 04 <67> 48 0f b9 3a 31 ed eb 42 e8 c1 13 1f 00 89 c5 31 ff 89 c6 e8 96 RSP: 0018:ffffc900041c70e0 EFLAGS: 00010283 RAX: ffffffff8afdc6ca RBX: ffffffff8afdc4e6 RCX: 0000000000080000 RDX: ffffc90010493000 RSI: 0000000000000948 RDI: ffffffff8f9a1700 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc900041c71e8 R11: fffff52000838e3f R12: dffffc0000000000 R13: ffff888041f9e3c0 R14: ffff888086ee3802 R15: 0000000000000000 FS: 00007f6fe985d6c0(0000) GS:ffff888126176000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f80bd437dac CR3: 0000000025096000 CR4: 00000000003526f0 DR0: ffffffffffffffff DR1: 00000000000001f8 DR2: 0000000000000002 DR3: ffffffffefffff15 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> check_local_dest net/hsr/hsr_forward.c:592 [inline] fill_frame_info net/hsr/hsr_forward.c:728 [inline] hsr_forward_skb+0xa11/0x2a80 net/hsr/hsr_forward.c:739 hsr_dev_xmit+0x253/0x370 net/hsr/hsr_device.c:236 __netdev_start_xmit include/linux/netdevice.h:5368 [inline] netdev_start_xmit include/linux/netdevice.h:5377 [inline] xmit_one net/core/dev.c:3888 [inline] dev_hard_start_xmit+0x2df/0x860 net/core/dev.c:3904 __dev_queue_xmit+0x1428/0x3900 net/core/dev.c:4870 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xcec/0x10b0 net/ipv4/ip_output.c:237 ip_send_skb net/ipv4/ip_output.c:1510 [inline] ip_push_pending_frames+0x8b/0x110 net/ipv4/ip_output.c:1530 raw_sendmsg+0x1547/0x1a50 net/ipv4/raw.c:659 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x7da/0x9c0 net/socket.c:2698 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0x1c3/0x2a0 net/socket.c:2787 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f6feb62ce59 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6fe985d028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6feb8a6090 RCX: 00007f6feb62ce59 RDX: 0000000000000000 RSI: 0000200000000000 RDI: 0000000000000004 RBP: 00007f6feb6c2d6f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f6feb8a6128 R14: 00007f6feb8a6090 R15: 00007ffcf01cc488 </TASK> | ||||
| CVE-2026-53339 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: qcom-cci: Fix NULL pointer dereference in cci_remove() On all modern platforms Qualcomm CCI controller provides two I2C masters, and on particular boards only one I2C master may be initialized, and in such cases the device unbinding or driver removal causes a NULL pointer dereference, because cci_halt() is called for all two I2C masters, but a completion is initialized only for the single enabled master: % rmmod i2c-qcom-cci Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 <snip> Call trace: __wait_for_common+0x194/0x1a8 (P) wait_for_completion_timeout+0x20/0x2c cci_remove+0xc4/0x138 [i2c_qcom_cci] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci] .... | ||||