Export limit exceeded: 25952 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25952 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53383 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject non-VALID session in compound request branch smb2_check_user_session() takes a shortcut for any operation that is not the first in a COMPOUND request: it reuses work->sess (the session bound by the first operation) and validates only the SessionId, then returns "valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation value) skips even the id comparison. The standalone path (ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does enforce the VALID state; the compound branch bypasses all of it. A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL (->user is assigned later, by ntlm_authenticate()). Used as operation 1 of a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX, \\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and reaches ksmbd_ipc_tree_connect_request(), which dereferences user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704) -> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd worker for all clients. Reject any non-first compound operation that lands on a session which is not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session, but it is never carried as a non-first compound operation, so multi-leg authentication is unaffected by this check. | ||||
| CVE-2026-53381 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtiofs: fix UAF on submount umount iput() called from fuse_release_end() can Oops if the super block has already been destroyed. Normally this is prevented by waiting for num_waiting to go down to zero before commencing with super block shutdown. This only works, however, for the last submount instance, as the wait counter is per connection, not per superblock. Revert to using synchronous release requests for the auto_submounts case, which is virtiofs only at this time. | ||||
| CVE-2026-53380 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rzv2h-ivc: Fix concurrent buffer list access The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a spinlock (`rzv2h_ivc::buffers.lock`). However, in `rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the `list_del()` call is executed without holding the spinlock, which makes it possible for the list to be concurrently modified Fix that by removing a buffer from the list in the lock protected section. [assign ivc->buffers.curr in critical section as reported by Barnabas] | ||||
| CVE-2026-53373 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap() The mmap_prepare hook functionality includes the ability to invoke mmap_prepare() from the mmap() hook of existing 'stacked' drivers, that is ones which are capable of calling the mmap hooks of other drivers/file systems (e.g. overlayfs, shm). As part of the mmap_prepare action functionality, we deal with errors by unmapping the VMA should one arise. This works in the usual mmap_prepare case, as we invoke this action at the last moment, when the VMA is established in the maple tree. However, the mmap() hook passes a not-fully-established VMA pointer to the caller (which is the motivation behind the mmap_prepare() work), which is detached. So attempting to unmap a VMA in this state will be problematic, with the most obvious symptom being a warning in vma_mark_detached(), because the VMA is already detached. It's also unncessary - the mmap() handler will clean up the VMA on error. So to fix this issue, this patch propagates whether or not an mmap action is being completed via the compatibility layer or directly. If the former, then we do not attempt VMA cleanup, if the latter, then we do. This patch also updates the userland VMA tests to reflect the change. | ||||
| CVE-2026-7872 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-20 | 7.5 High |
| IBM Langflow OSS 1.0.0 through 1.10.0 allows an authenticated attacker to read arbitrary files including the JWT signing key and forge authentication tokens for any user. | ||||
| CVE-2026-14499 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-20 | 8.8 High |
| IBM Langflow OSS 1.0.0 through 1.10.1 Langflow could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input in the Python Interpreter component. | ||||
| CVE-2026-9103 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-20 | 9.8 Critical |
| IBM Langflow OSS 1.0.0 through 1.10.0 could allow a remote attacker to gain unauthorized access due to improper authentication in the /api/v1/login/auto_login endpoint. The endpoint issues long-lived superuser bearer tokens without requiring authentication when the AUTO_LOGIN configuration is enabled (enabled by default), which may allow an unauthenticated network attacker to obtain full administrative access. Additionally, permissive cross-origin resource sharing (CORS) settings may allow tokens to be exposed to unintended origins, increasing the risk of unauthorized access. | ||||
| CVE-2026-8859 | 5 Apple, Ibm, Langflow and 2 more | 5 Macos, Langflow Oss, Langflow and 2 more | 2026-07-20 | 9.9 Critical |
| IBM Langflow OSS 1.0.0 through 1.10.0 Langflow could allow an attacker to write arbitrary files to unintended locations due to improper input validation in the APIRequest component. A path traversal vulnerability exists when the "Save to File" feature is enabled, where filenames extracted from HTTP response Content-Disposition headers are not sanitized before being joined to the temporary directory path. An attacker controlling an external HTTP server can supply crafted filename values containing path traversal sequences (e.g., ../), enabling arbitrary file writes to locations accessible by the Langflow process. | ||||
| CVE-2026-63958 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_connector_change() The connector number in a UCSI CCI notification is a 7-bit field supplied by the PPM. ucsi_connector_change() uses it to index the ucsi->connector[] array without checking it against the number of connectors the PPM reported at init time, so a buggy or malicious PPM (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 / glink transports) can drive schedule_work() on memory past the end of the array. Reject connector numbers that are zero or exceed cap.num_connectors before dereferencing the array. | ||||
| CVE-2026-63826 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: fix use-after-free in store_modes() store_modes() replaces a framebuffer's modelist with modes from userspace. On success it frees the old modelist with fb_destroy_modelist(). Two fields still point into that freed list. One pointer is fb_display[i].mode, the mode a console is using. fbcon_new_modelist() moves these pointers to the new list. It only does so for consoles still mapped to the framebuffer. An unmapped console is skipped and keeps its stale pointer. Unbinding fbcon, for example, sets con2fb_map[i] to -1 but leaves fb_display[i].mode set. An FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches fbcon_mode_deleted(). That function reads the stale fb_display[i].mode through fb_mode_is_equal(). The read is a use-after-free. The other pointer is fb_info->mode, the current mode. It is set through the mode sysfs attribute. store_modes() does not update fb_info->mode, so it is left pointing into the freed list. show_mode(), the attribute's read handler, dereferences the stale fb_info->mode through mode_string(). The read is a use-after-free. Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon: Set fb_display[i]->mode to NULL when the mode is released") added the helper fbcon_delete_modelist(). It clears every fb_display[i].mode that points into a given list. So far it is called only from the unregister path. Call it from store_modes() too, and set fb_info->mode to NULL. | ||||
| CVE-2026-53403 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var info->var, a framebuffer's current mode, is expected to have a matching entry in info->modelist. var_to_display() relies on this and treats a failed fb_match_mode() as "This should not happen". fb_set_var() keeps it true by adding the mode to the list on every change, and do_register_framebuffer() does the same at registration. store_modes() replaces the modelist from userspace. fb_new_modelist() validates the new modes but does not check that info->var still has a match. It relies on fbcon_new_modelist() to re-point consoles, but that only handles consoles mapped to the framebuffer. With fbcon unbound there are none, so info->var is left describing a mode that is no longer in the list. A later console takeover runs var_to_display(), where fb_match_mode() returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode. Keep the current mode in the list in fb_new_modelist(), the same way fb_set_var() does. | ||||
| CVE-2026-53376 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add upper bound check for num_of_nodes drm/amdkfd: Add upper bound check for num_of_nodes in kfd_ioctl_get_process_apertures_new. (cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f) | ||||
| CVE-2026-63928 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: omninet: fix memory corruption with small endpoint Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected. | ||||
| CVE-2026-63838 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: rsnd: Fix potential out-of-bounds access of component_dais[] component_dais[RSND_MAX_COMPONENT] is initially zero-initialized and later populated in rsnd_dai_of_node(). However, the existing boundary check: if (i >= RSND_MAX_COMPONENT) does not guarantee that the last valid element remains zero. As a result, the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero, which may lead to an out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-63837 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Check return code before setting timestamp output ena_phc_gettimex64() is setting the output parameter regardless of whether ena_com_phc_get_timestamp() succeeded or failed. When ena_com_phc_get_timestamp() returns an error, the timestamp parameter may contain uninitialized stack memory (e.g., when PHC is disabled or in blocked state) or invalid hardware values. Passing these to userspace via the PTP ioctl is both a security issue (information leak) and a correctness bug. Fix by checking the return code after releasing the lock and only setting the output timestamp on success. | ||||
| CVE-2026-63836 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics. ((mss * 8) ** 2) / (cwnd * 8) In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around and be 0 - resulting in: ((mss * 8) ** 2) / 0 This is of course invalid and cannot be calculated. The calculation should must be simplified to avoid this overflow: (mss ** 2) * 8 / cwnd It will keep the precision enhancement from the scaling (by 8) but avoid the overflow in the divisor. In theory, there could still be an overflow in the dividend. It is at the moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an imminent problem. But allowing it to use the whole u32 bit range, would mean that it can still use up to 67 bits. To keep this calculation safe for 32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits - or in other words: must never be larger than 16383. | ||||
| CVE-2026-63835 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: prevent OGM aggregation on disabled hardif When an interface gets disabled, the worker is correctly disabled by batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable(). In this process, the skb aggr_list is also freed. But batadv_v_ogm_send_meshif() can still queue new skbs (via batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all cores can no longer find the RCU protected list of hard interfaces. These queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work. The batadv_v_ogm_iface_disable() function must block batadv_v_ogm_queue_on_if() to avoid leak of skbs. | ||||
| CVE-2026-63834 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: restrict number of unacked list entries When the unacked_list is unbound, an attacker could send messages with small lengths and appropriated seqno + gaps to force the receiver to allocate more and more unacked_list entries. And the end either causing an out-of-memory situation or increase the management overhead for the (large) list that significant portions of CPU cycles are wasted in searching through the list. When limiting the list to a specific number, it is important to still correctly add a new entry to the list. But if the list became larger than the limit, the last entry of the list (with the highest seqno) must be dropped to still allow the earlier seqnos to finish and therefore to continue the process. Otherwise, the process might get stuck with too high seqnos which are not handled by batadv_tp_ack_unordered(). | ||||
| CVE-2026-63822 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath11k_pci), and we get: WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90 Call Trace: free_large_kmalloc ath11k_dp_free ath11k_core_deinit ath11k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. | ||||
| CVE-2026-63821 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: fix memory leaks on USB write failures When rtw_usb_write_port() fails to submit a USB Request Block (URB) (e.g., due to device disconnect or ENOMEM), the completion callback is never executed. Currently, the driver ignores the return value of rtw_usb_write_port() in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these functions rely on the completion callback to free the socket buffers (skbs) and the transaction control block (txcb), a submission failure results in: 1. A memory leak of the allocated skb in rtw_usb_write_data(). 2. A memory leak of the txcb structure and all aggregated skbs in rtw_usb_tx_agg_skb(). Fix this by checking the return value of rtw_usb_write_port(). If it fails, explicitly free the skb in rtw_usb_write_data(), and properly purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb(). The issue was discovered in practice during device disconnect/reconnect scenarios and memory pressure conditions. Tested by verifying normal TX operation continues after the fix without regressions. | ||||