Export limit exceeded: 107045 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (107045 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98255 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: exclude old ACKs from tcp fast path Exclude old ACKs before SND.UNA from the tcp fast path as well as ACKs after SND.NXT. Such ACKs will fall through to the slow path, where tcp_ack() performs the appropriate validation and challenge ACK handling according to RFC5961 and Commit 3d501dd326fb1c7 ("tcp: do not accept ACK of bytes we never sent"). This prevents old ACKs from being accepted or modifying connection state as part of the fast path before appropriate ACK validation is applied. In particular, this prevents payload carried by a segment with an excessively old ACK from advancing RCV.NXT before the ACK is rejected. | ||||
| CVE-2026-98266 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix potential UAF after asynchronous card release Usually a sound driver releases the resources assigned to the card via snd_card_free(), and it synchronizes with the whole release procedure. However, when the card is released asynchronously via snd_card_free_when_closed() like USB-audio driver, the situation is slightly different; although the snd_card_disconnect() call at the disconnection guarantees that any newer accesses will be gated, the in-flight tasks might be still accessing to the underlying card->dev device even after the disconnection, which would cause a use-after-free in the end, as reported by fuzzers. For addressing the bug above, this patch takes the refcount of card->dev at initialization of the card object, and releases at its destructor. This assures the availability of the card->dev in its whole lifecycle. | ||||
| CVE-2026-98339 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't filter by BSS type when removing stale entries When an assoc AP switches to a channel that already has a BSS entry, cfg80211_update_assoc_bss_entry() removes that entry before rehashing the real one, since the two would otherwise collide in the BSS rbtree. The lookup for that entry also required it to match the connection's BSS type, so an entry advertising e.g. the IBSS capability bit was left in place, and the following cfg80211_rehash_bss() then ran into it: WARN_ON(!cmp) Changing the type shouldn't really happen, but can be triggered by a rogue AP/device, so drop the check and remove any entries matching the comparison. | ||||
| CVE-2026-98380 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: reject IDR error pointers when deleting actions tcf_action_delete() drops the reference held by its lookup before calling tcf_idr_delete_index() with the saved action index. An unlocked classifier can remove that action and reserve the same IDR slot with ERR_PTR(-EBUSY) in between. tcf_idr_delete_index() only checks the lookup result for NULL. It therefore treats the reservation as a tc_action and dereferences tcfa_bindcnt. A hardware execution breakpoint was used to schedule the interleaving without changing the kernel source. KASAN reported this decoded trace: BUG: KASAN: null-ptr-deref in tca_action_gd+0x5b9/0x1010 Read of size 4 at addr 0000000000000010 by task poc/150 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002 RIP: tca_action_gd+0x5c0/0x1010: arch_atomic_read at arch/x86/include/asm/atomic.h:23 raw_atomic_read at include/linux/atomic/atomic-arch-fallback.h:457 atomic_read at include/linux/atomic/atomic-instrumented.h:33 tcf_idr_delete_index at net/sched/act_api.c:766 tcf_action_delete at net/sched/act_api.c:1859 tcf_del_notify at net/sched/act_api.c:2014 tca_action_gd at net/sched/act_api.c:2064 R13: 0000000000000010 R15: fffffffffffffff0 Kernel panic - not syncing: Fatal exception R15 contains ERR_PTR(-EBUSY), and adding the tcfa_bindcnt offset produces the address in R13. With the guard applied, the same reproducer returned -ENOENT without a KASAN report or panic. Treat error pointers as absent and return -ENOENT. | ||||
| CVE-2026-98276 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding the socket lock, because sock_set_flag() and sock_reset_flag() use non atomic operations (__set_bit() and __clear_bit()). sock_gettstamp() is one of the last places where a bit of sk->sk_flags is changed from a syscall without owning the socket lock, through sock_enable_timestamp(sk, SOCK_TIMESTAMP). sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp, sunrpc, wireguard) need a careful audit, this will be addressed in a separate patch. Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind() can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set, because both threads perform a read-modify-write on the same word. CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW) -------------------------------- ---------------------------- read sk_flags = F read sk_flags = F compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP) store F | BIT(SOCK_RCU_FREE) sk_add_node_rcu(sk, ...) store F | BIT(SOCK_TIMESTAMP) After the lost update, SOCK_RCU_FREE is clear while the socket is visible to lockless UDP receive lookups. sk_destruct() then frees the socket immediately instead of waiting for a RCU grace period, while the receive path still holds a reference-less pointer to it: BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410 Read of size 8 at addr ffff888008806610 by task exploit/207 CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1 ipv4_pktinfo_prepare+0x30/0x410 udp_queue_rcv_one_skb+0x51c/0x1180 udp_unicast_rcv_skb+0x109/0x350 ip_protocol_deliver_rcu+0x14b/0x310 ip_local_deliver_finish+0x29d/0x390 ip_local_deliver+0x24d/0x2a0 Only grab the socket lock when SOCK_TIMESTAMP has to be set, to keep the common case lockless. | ||||
| CVE-2026-98283 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid() kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a reference on the kvm_nested_guest pointer obtained from the IDR. A concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove / --refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving the iterating vCPU with a dangling pointer. The subsequent mutex_lock(&gp->tlb_lock) and accesses to gp->shadow_pgtable, gp->shadow_lpid and gp->l1_host all touch freed memory. The free path is fully L1-controlled. Fix this by incrementing gp->refcnt inside the loop before dropping mmu_lock, mirroring what kvmhv_get_nested() does, and releasing the reference with kvmhv_put_nested() after the per-guest work completes. This is the same get/put discipline already used at every other call site that drops mmu_lock while holding a nested-guest pointer. | ||||
| CVE-2026-98342 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: wait for RCU readers before releasing dma_device dma_issue_pending_all() walks the dma_device_list with list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release() unlinks the device with list_del_rcu() and then calls device->device_release() (which in many drivers, such as plx_dma.c, directly calls kfree()). Because there is no grace period between unlinking the device and freeing it, concurrent RCU readers in dma_issue_pending_all() can access the device after it has been freed. The lockless walk originally relied on clients holding a dmaengine reference to pin the provider module, and therefore the device, for as long as they might traverse the list. Commit 8ad342a86359 ("dmaengine: Add reference counting to dma_device struct") decoupled the dma_device lifetime from the module reference, so the device can now be released while a reader is still walking the list. Add synchronize_rcu() before the device is freed, so RCU readers are guaranteed to have finished. Keep it unconditional: providers that do not implement device_release() free the device themselves once dma_async_device_unregister() returns. This call will delay for a grace period with dma_list_mutex held, which is safe and only teardown path is delayed. | ||||
| CVE-2026-98343 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel() When dma_device_put() drops the last reference on chan->device->ref, dma_device_release() runs and may free the dma_device along with its channels. dma_chan_put() then still reads chan->device->owner via dma_chan_to_owner() for the trailing module_put(). KASAN catches it: slab-use-after-free in dma_chan_put+0x3e6/0x4c0 Read of size 8 by task insmod/6319 Freed by task 6319: kfree+0x225/0x470 dma_chan_put+0x395/0x4c0 dmaengine_put+0xf8/0x160 Cache the module owner in dma_chan_put() before the put so the trailing module_put() does not need chan->device. | ||||
| CVE-2026-98348 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short association responses libipw_handle_assoc_resp() reads the capability, status and aid fields of the 30-byte association response prefix and then computes the information element length as stats->len - sizeof(*frame) stats->len is a u16 and sizeof() has type size_t, so the subtraction is evaluated as size_t and wraps instead of going negative. Truncating that to the u16 length parameter of libipw_parse_info_param() turns a frame shorter than the fixed fields into a length near 64 KiB, and the parser then reads past the receive buffer. Both the ipw2100 and ipw2200 management receive paths reach this function having established only that the frame carries the generic 24-byte three-address header. Reject the frame before any fixed field is touched. Found by an AI-assisted review of length arithmetic in management frame parsers. Verified with a KUnit case under Generic KASAN on arm64 under QEMU; I do not have the hardware, so it is not tested on a real device. | ||||
| CVE-2026-98252 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: fix refcount bug in iwpm_get_nlmsg_request() iwpm_get_nlmsg_request() initializes refcount _after_ list_add_tail() making it accessible to global list where another CPU can kref_get() on nlmsg_request causing a refcount "addition on 0" bug. Fix this by initializing kref _before_ list_add_tail() so refcount for nlmsg_request can be incremented/decremented normally. In addition, also initialize every field before list_add_tail(). | ||||
| CVE-2026-98254 | 1 Linux | 1 Linux Kernel | 2026-10-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: swiotlb: use the adjusted address for the highmem page lookup swiotlb_bounce() reads the page frame number from the slot's recorded orig_addr, then advances orig_addr by tlb_offset to reach the address the caller asked about. The highmem branch mixes the two: the offset within the page comes from the adjusted address, the page from the value before it. Once the adjustment crosses a page boundary the pair no longer describes one location, and the whole copy lands one page below the intended one for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE writes the device data over the wrong page and leaves the intended one stale, DMA_TO_DEVICE feeds the device from a page the mapping may not cover. Partial syncs through dma_sync_single_range_for_*() are what make tlb_offset non-zero. The branch test is picked the same way, so a slot recorded in lowmem can be adjusted into highmem and the lowmem path then hands a highmem address to phys_to_virt(). Take both from orig_addr once it is final and keep pfn in the branch that uses it. PhysHighMem() asks the question straight from the address, as dma-debug already does. | ||||
| CVE-2026-82049 | 1 Python | 1 Cpython | 2026-10-11 | 7.1 High |
| In CPython 3.13 and earlier, the tarfile module's data and tar extraction filters are vulnerable to crafted archives containing a hard link to a symbolic link. Such archives may cause extraction to modify the permissions or modification time of a file outside the destination directory, or expose the contents of that file within the extracted tree. | ||||
| CVE-2026-55797 | 1 Argoproj | 1 Argo-cd | 2026-10-10 | 8.8 High |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From 2.11.0 until 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2, the Argo CD repo-server is vulnerable to command injection when it clones, tests, or fetches an SSH Git repository configured with a proxy URL. The proxy host and port are embedded in an SSH ProxyCommand that is executed through a shell without neutralizing shell metacharacters. A user who can create or update a repository or repository credential template can supply a crafted proxy host to execute commands in the repo-server and access its Git, Helm, and OCI credentials. This issue is fixed in versions 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2. | ||||
| CVE-2026-82900 | 1 Ibm | 1 Guardium Data Protection | 2026-10-10 | 8.1 High |
| IBM Guardium Data Protection 12.2.2, and 12.1 could allow a remote attacker to delete arbitrary files due to improper limitation of a pathname to a restricted directory. | ||||
| CVE-2026-19494 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-10-10 | 8.1 High |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 could allow a remote authenticated attacker to bypass security restrictions due to improper authentication. | ||||
| CVE-2026-87781 | 2026-10-10 | 8.6 High | ||
| The LTL Freight Quotes WordPress plugin before 4.2.19 does not sanitise and escape a parameter before using it in a SQL statement, leading to a SQL injection exploitable by unauthenticated users. | ||||
| CVE-2026-87780 | 2026-10-10 | 8.8 High | ||
| The LTL Freight Quotes WordPress plugin before 4.2.19 does not sanitise and escape values submitted through an unauthenticated endpoint before storing them and outputting them back in an administrative page, leading to Stored XSS which will execute in the session of any administrator viewing it. | ||||
| CVE-2026-104752 | 2026-10-10 | 7.2 High | ||
| The Rank Math SEO WordPress plugin before 1.0.280 does not correctly validate the type of a file uploaded through its settings import feature, allowing users with administrator-level access to upload a PHP file and achieve remote code execution. | ||||
| CVE-2026-95116 | 1 Libming | 1 Libming | 2026-10-10 | 7.5 High |
| An issue in libming through 0.4.8 allows a remote attacker to cause a denial of service via the readtag_file() in src/blocks/fromswf.c. | ||||
| CVE-2026-84245 | 1 Ibm | 1 Guardium Data Protection | 2026-10-10 | 7.8 High |
| IBM Guardium Data Protection 12.2 is vulnerable to a local privilege escalation in the cp_wrapper component. A low-privileged local user could exploit this vulnerability to gain root privileges and access or modify sensitive system files. | ||||