Export limit exceeded: 25720 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25720 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72306 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vduse: Fix race in vduse_dev_msg_sync and vduse_dev_read_iter There is one race case in vduse_dev_msg_sync and vduse_dev_read_iter: vduse_dev_read_iter(): lock(msg_lock); dequeue_msg(send_list); unlock(msg_lock); vduse_dev_msg_sync(): wait_timeout() finish lock(msg_lock); check msg->complete is false list_del(msg); <- double list_del() crash! To fix this case, we shall ensure vduse_msg is on send_list or recv_list outside the msg_lock critical section. | ||||
| CVE-2022-49983 | 1 Linux | 1 Linux Kernel | 2026-08-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udmabuf: Set the DMA mask for the udmabuf device (v2) If the DMA mask is not set explicitly, the following warning occurs when the userspace tries to access the dma-buf via the CPU as reported by syzbot here: WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188 __dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Modules linked in: CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188 Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0 83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45 31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00 RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408 RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002 R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000 FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264 get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72 begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126 dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164 dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f62fcf530f9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9 RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006 RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> v2: Dont't forget to deregister if DMA mask setup fails. | ||||
| CVE-2022-49527 | 1 Linux | 1 Linux Kernel | 2026-08-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: avoid null dereference in deinit If venus_probe fails at pm_runtime_put_sync the error handling first calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets core->ops to NULL, hfi_core_deinit cannot call the core_deinit function anymore. Avoid this null pointer derefence by skipping the call when necessary. | ||||
| CVE-2026-72501 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Initialize dpi variable to zero dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied for all the cases. So initialize the dpi to 0. | ||||
| CVE-2026-72140 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource() If devm_platform_get_and_ioremap_resource() returns an error, mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to get the error code. This results in a use-after-free. Save the error code before freeing tmp_res. | ||||
| CVE-2026-72092 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject command submission on devices without a submit op amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit() unconditionally, but only aie2_dev_ops defines that callback. aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer call and oopses the kernel. AIE4 submits work through a mapped user queue and doorbell, not this ioctl path. Reject the submission early with -EOPNOTSUPP when the device provides no cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-62900 | 3 Apple, Linux, Microsoft | 6 Macos, Linux Kernel, .net and 3 more | 2026-08-14 | 5.9 Medium |
| Improper removal of sensitive information before storage or transfer in .NET allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-53175 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and flushes every fragment queue that is not yet complete using inet_frag_queue_flush(). That helper frees all the skbs queued on the fragment queue but does not set INET_FRAG_COMPLETE, and leaves q->fragments_tail and q->last_run_head pointing at the freed skbs. The queue itself stays in the rhashtable. fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups, but it cannot stop a fragment that already obtained the queue through inet_frag_find() earlier and stalled just before taking the queue lock. Once that fragment resumes after the flush and takes the queue lock, it passes the INET_FRAG_COMPLETE check and then dereferences the freed fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of that pointer and, on the append path, writes ->next_frag, causing a slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly share the same flush path and are affected as well. Reset rb_fragments, fragments_tail and last_run_head in inet_frag_queue_flush() so a flushed queue no longer points at the freed skbs. A fragment that resumes after the flush and takes the queue lock then finds an empty queue and starts a new run instead of dereferencing the freed fragments_tail. ip_frag_reinit() already performed this reset after its own flush, so drop the now duplicate code there. | ||||
| CVE-2026-62871 | 3 Apple, Linux, Microsoft | 8 Macos, Linux Kernel, .net and 5 more | 2026-08-14 | 7.8 High |
| Out-of-bounds write in .NET allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-43488 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC. | ||||
| CVE-2026-45923 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: catc: enable basic endpoint checking catc_probe() fills three URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX - usb_rcvintpipe(usbdev, 2) for interrupt status A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a catc_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls after usb_set_interface() to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time. Similar to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") which fixed the issue in rtl8150. | ||||
| CVE-2026-68330 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix DMA direction for NPU mailbox buffer airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE, but some callers expect the NPU to write response data back into the same buffer: - airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into the buffer, then the caller reads it via memcpy() - airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back npu_stats_addr field in the response On non-cache-coherent architectures like EN7581 (Cortex-A53 without hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op — it does not invalidate the CPU cache. If the NPU-written cache line is still present in the CPU cache when the caller reads the buffer, the CPU observes stale data instead of the NPU response. This is a timing-sensitive bug: small mailbox buffers (~24 bytes) typically fit in a single cache line and may survive in the cache until the caller reads them, producing silent data corruption rather than a crash. The bug is more likely to trigger when the caller reads the response immediately after dma_unmap_single() without intervening cache-evicting operations. Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures dma_unmap_single() invalidates the CPU cache on non-coherent systems. The mailbox buffers are small so there is no performance concern. | ||||
| CVE-2026-68415 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: clear mode callbacks after failed mode setup xfrm_state_gc_task can run long after a failed IPTFS state setup. In the reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup returned -ENOMEM before publishing mode_data, and the temporary module reference from xfrm_get_mode_cbs() was dropped immediately. The dead state then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been unloaded. Clear x->mode_cbs when mode init or clone fails before publishing mode_data. Those states never installed mode-specific state or the long-term IPTFS module pin, so deferred GC has nothing mode-specific to destroy and must not retain a callback table pointer past the temporary lookup reference. The buggy scenario involves two paths, with each column showing the order within that path: failed setup path: 1. cache x->mode_cbs 2. mode setup fails before mode_data 3. drop the temporary module ref 4. dead state keeps x->mode_cbs cached GC/unload path: 1. xfrm_state_put() queues GC work 2. xfrm_iptfs unloads later 3. xfrm_state_gc_task runs 4. GC dereferences stale x->mode_cbs This also covers the failed clone path where clone_state() returns before publishing mode_data. Validation reproduced this kernel report: Kernel panic - not syncing: Fatal exception CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y failslab_stacktrace_filter matched xfrm_iptfs frames ack_error=-12 FAULT_INJECTION: forcing a failure BUG: unable to handle page fault Workqueue: events xfrm_state_gc_task RIP: xfrm_state_gc_task+0x142/0x650 Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs] Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-45853 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges() amdgpu_discovery_get_nps_info() internally allocates memory for ranges using kvcalloc(), which may use vmalloc() for large allocation. Using kfree() to release vmalloc memory will lead to a memory corruption. Use kvfree() to safely handle both kmalloc and vmalloc allocations. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-45864 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent infinite loops caused by the next valid being the same When processing valid within the range [valid : pos), if valid cannot be retrieved correctly, for example, if the retrieved valid value is always the same, this can trigger a potential infinite loop, similar to the hung problem reported by syzbot [1]. Adding a check for the valid value within the loop body, and terminating the loop and returning -EINVAL if the value is the same as the current value, can prevent this. [1] INFO: task syz.4.21:6056 blocked for more than 143 seconds. Call Trace: rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244 inode_lock include/linux/fs.h:1027 [inline] ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 | ||||
| CVE-2026-46091 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: heed coherency rules In a control request, the USB request structure can be subject to DMA on some HCs. Hence it must obey the rules for DMA coherency. Allocate it separately. | ||||
| CVE-2025-71315 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Convert to DRM's vblank timer Replace vkms' vblank timer with the DRM implementation. The DRM code is identical in concept, but differs in implementation. Vblank timers are covered in vblank helpers and initializer macros, so remove the corresponding hrtimer in struct vkms_output. The vblank timer calls vkms' custom timeout code via handle_vblank_timeout in struct drm_crtc_helper_funcs. | ||||
| CVE-2026-45883 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: sca3000: Fix a resource leak in sca3000_probe() spi->irq from request_threaded_irq() not released when iio_device_register() fails. Add an return value check and jump to a common error handler when iio_device_register() fails. | ||||
| CVE-2026-45886 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_xdp_store_bytes proto for read-only arg While making some maps in Cilium read-only from the BPF side, we noticed that the bpf_xdp_store_bytes proto is incorrect. In particular, the verifier was throwing the following error: ; ret = ctx_store_bytes(ctx, l3_off + offsetof(struct iphdr, saddr), &nat->address, 4, 0); 635: (79) r1 = *(u64 *)(r10 -144) ; R1=ctx() R10=fp0 fp-144=ctx() 636: (b4) w2 = 26 ; R2=26 637: (b4) w4 = 4 ; R4=4 638: (b4) w5 = 0 ; R5=0 639: (85) call bpf_xdp_store_bytes#190 write into map forbidden, value_size=6 off=0 size=4 nat comes from a BPF_F_RDONLY_PROG map, so R3 is a PTR_TO_MAP_VALUE. The verifier checks the helper's memory access to R3 in check_mem_size_reg, as it reaches ARG_CONST_SIZE argument. The third argument has expected type ARG_PTR_TO_UNINIT_MEM, which includes the MEM_WRITE flag. The verifier thus checks for a BPF_WRITE access on R3. Given R3 points to a read-only map, the check fails. Conversely, ARG_PTR_TO_UNINIT_MEM can also lead to the helper reading from uninitialized memory. This patch simply fixes the expected argument type to match that of bpf_skb_store_bytes. | ||||
| CVE-2026-45889 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: do not account for OoO in mptcp_rcvbuf_grow() MPTCP-level OoOs are physiological when multiple subflows are active concurrently and will not cause retransmissions nor are caused by drops. Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly drifting towards tcp_rmem[2]. Remove such accounting. Note that subflows will still account for TCP-level OoO when the MPTCP-level rcvbuf is propagated. This also closes a subtle and very unlikely race condition with rcvspace init; active sockets with user-space holding the msk-level socket lock, could complete such initialization in the receive callback, after that the first OoO data reaches the rcvbuf and potentially triggering a divide by zero Oops. | ||||