Export limit exceeded: 25812 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25812 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64142 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: close durable scavenger races against m_fp_list lookups ksmbd_durable_scavenger() has two related races against any walker that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode() (used by ksmbd_vfs_rename) and the share-mode checks in fs/smb/server/smb_common.c. (1) fp->node list-head reuse. Durable-preserved handles can remain linked on f_ci->m_fp_list after session teardown so share-mode checks still see them while the handle is reconnectable. The scavenger collected expired handles by adding fp->node to a local scavenger_list after removing them from the global durable idr. Because fp->node is the same list_head used by m_fp_list, list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links and corrupts both lists. CONFIG_DEBUG_LIST can report this on the share-mode walk path. (2) Refcount race against m_fp_list walkers. The scavenger qualifies an expired durable handle with atomic_read(&fp->refcount) > 1 and fp->conn under global_ft.lock, removes fp from global_ft, then drops global_ft.lock before unlinking fp from m_fp_list and freeing it. During that gap fp is still linked on m_fp_list with f_state == FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and takes a live reference; the scavenger then unlinks and frees fp while the holder owns a reference, leading to UAF on the holder's subsequent ksmbd_fd_put() and on any field reads performed by a concurrent share-mode walker that iterates m_fp_list without taking ksmbd_fp_get() (smb_check_perm_dleases-like paths). Fix both: * Stop reusing fp->node as a scavenger-private list node. Remove one expired handle from global_ft under global_ft.lock, take an explicit transient reference, drop the lock, unlink fp->node from m_fp_list under f_ci->m_lock, then drop both the durable lifetime and transient references with atomic_sub_and_test(2, &fp->refcount). If the scavenger is the last putter the close runs there; otherwise an in-flight holder that already raced through the m_fp_list lookup owns the final close via its ksmbd_fd_put() path. The one-at-a-time disposal can rescan the durable idr when multiple handles expire in the same pass, but durable scavenging is a background expiration path and the final full scan recomputes min_timeout before the next wait. * Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right after idr_remove(), so a delayed final close from a holder that snatched fp does not re-issue idr_remove() on a persistent id that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have already handed out to a brand-new durable handle. * Bypass the per-conn open_files_count decrement in __put_fd_final() when fp is detached from any session table (fp->conn cleared by session_fd_check() at durable preserve -- paired with the volatile_id clear at unpublish, so checking fp->conn alone is sufficient). The walker that owns the final close runs from an unrelated work->conn whose stats.open_files_count never tracked this durable fp; without this guard the holder would underflow that unrelated counter. The two races are folded into one patch because patch (1) alone cleans up the corrupted list but leaves a deterministic UAF window for m_fp_list walkers that the transient-reference and persistent_id discipline in (2) close; bisecting onto an intermediate state would land on a UAF that pre-patch chaos merely made less reproducible. Validation: * CONFIG_DEBUG_LIST coverage for the list_head reuse path. * KASAN-enabled direct SMB2 durable-handle coverage that exercised ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode() returns while durable handles expired under concurrent rename lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING reports. ---truncated--- | ||||
| CVE-2026-64143 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: uniwill-laptop: Do not enable the charging limit even when forced It seems that on some older models (~2020) the battery charging limit can permanently damage the battery. Prevent users from enabling this feature thru the "force" module parameter to avoid causing permanent hardware damage on such devices. | ||||
| CVE-2026-64144 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: fix urb->setup_packet leak in error paths The setup_packet of control urb is not freed if usb_submit_urb fails or the submitted urb is killed. Add free in these two paths. | ||||
| CVE-2026-64145 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix dma_buffer leak on bus acquire failure wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at the top of the function and uses a 'fail:' label to free it via kfree(dma_buffer) on error. All later error paths correctly use 'goto fail' to route through this cleanup. However, the early failure path after the first acquire_bus() call uses a bare 'return ret;', which leaks dma_buffer whenever the bus acquire fails. Replace the early return with goto fail so the existing cleanup path runs. Found via a custom Coccinelle semantic patch hunting for kmalloc'd locals leaked on early-return error paths in driver firmware-download code. | ||||
| CVE-2026-64147 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: fix debugfs_lookup dentry leak and error handling debugfs_lookup() returns a dentry with an elevated reference count that must be released with dput(). The current code discards the returned dentry without calling dput(), causing a reference leak on every firmware reset recovery. Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup() returns ERR_PTR(-ENODEV), not NULL. The current check passes for error pointers and would call dput() on an invalid pointer, causing a crash. | ||||
| CVE-2026-64245 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: modedb: fix a possible UAF in fb_find_mode() If mode_option is NULL, it is assigned from mode_option_buf: if (!mode_option) { fb_get_options(NULL, &mode_option_buf); mode_option = mode_option_buf; } Later, name is assigned from mode_option: const char *name = mode_option; However, mode_option_buf is freed before name is no longer used: kfree(mode_option_buf); while name is still accessed by: if ((name_matches(db[i], name, namelen) || Since name aliases mode_option_buf, this may result in a use-after-free. Fix this by extending the lifetime of mode_option_buf until the end of the function by using scope-based resource management for cleanup. | ||||
| CVE-2026-72093 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap() When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma) which internally calls drm_gem_vm_close() → drm_gem_object_put(), releasing the GEM object reference acquired at the start of the function. However, the close_vma label then falls through to put_obj, which calls drm_gem_object_put() a second time on the same object. If the first put releases the last reference, the object is freed and the second put accesses freed memory, causing a use-after-free. Fix by returning directly from close_vma instead of falling through to put_obj, since the close handler already performs all necessary cleanup including the object put. | ||||
| CVE-2026-72226 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: prevent TVLV OOB check overflow A TT unicast TVLV contains the number of VLANs stored in it. This number is an u16 and gets multiplied by the size of the struct batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16 used to store the tt_vlan_len. All additional safety checks to prevent out-of-bounds access of the TVLV buffer are invalid due to this overflow. Using size_t prevents this overflow and ensures that the safety checks compare against the actual buffer requirements. | ||||
| CVE-2026-12702 | 3 Linux, Microsoft, Octopus | 3 Linux Kernel, Windows, Octopus Server | 2026-08-17 | 4.9 Medium |
| In affected versions of Octopus Deploy Insufficient checks on the project trigger actions allows an unauthorized user to trigger a deployment. | ||||
| CVE-2026-72277 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Inject SEA if guest VNCR isn't normal memory When constructing an L1 VNCR mapping, KVM unconditionally uses cacheable memory attributes, even if the underlying PFN isn't memory. This gets particularly hairy if the endpoint doesn't support cacheable memory attributes, potentially throwing an SError on writeback... While KVM does permit cacheable memory attributes on certain PFNMAP VMAs, kvm_translate_vncr() isn't currently grabbing the VMA. So do the simpler thing for now and just reject everything that isn't memory. | ||||
| CVE-2026-72279 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Respect read-only PFN when mapping L1 VNCR KVM currently maps the L1 VNCR into the host stage-1 by relying entirely on the permissions of the guest stage-1. At the same time, it is entirely possible that the backing PFN is read-only (e.g. RO memslot), meaning that the L1 VNCR should use at most a read-only mapping. Cache the writability of the PFN in the VNCR TLB and use it to constrain the resulting fixmap permissions. Promote VNCR permission faults to an SEA in the case where the guest attempts to write to a read-only endpoint. Conveniently, this also plugs a page leak found by Sashiko [*] resulting from the early return for a read-only PFN. | ||||
| CVE-2026-72344 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, skip peer flow cleanup when LAG seq is unavailable mlx5_lag_get_dev_seq() will return error when the peer isn't in the LAG or when no device is marked as master. Result bad memory access and kernel crash[1]. Hence, skip the peer when lookup fails. Note: In case there are peer flows, they are cleaned before LAG cleared the master mark. [1] RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0x3d/0x350 [mlx5_core] Call Trace: <TASK> mlx5e_tc_clean_fdb_peer_flows+0xc1/0x130 [mlx5_core] mlx5_esw_offloads_unpair+0x3a/0x400 [mlx5_core] mlx5_esw_offloads_devcom_event+0xee/0x360 [mlx5_core] mlx5_devcom_send_event+0x7a/0x140 [mlx5_core] mlx5_esw_offloads_devcom_cleanup+0x2f/0x90 [mlx5_core] mlx5e_tc_esw_cleanup+0x28/0xf0 [mlx5_core] mlx5e_rep_tc_cleanup+0x19/0x30 [mlx5_core] mlx5e_cleanup_uplink_rep_tx+0x36/0x40 [mlx5_core] mlx5e_cleanup_rep_tx+0x55/0x60 [mlx5_core] mlx5e_detach_netdev+0x96/0xf0 [mlx5_core] mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] mlx5e_vport_rep_unload+0xdd/0x110 [mlx5_core] __esw_offloads_unload_rep+0x81/0xb0 [mlx5_core] mlx5_eswitch_unregister_vport_reps+0x1d7/0x220 [mlx5_core] mlx5e_rep_remove+0x22/0x30 [mlx5_core] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xe8/0x1b0 device_del+0x159/0x3c0 mlx5_rescan_drivers_locked+0xbc/0x2d0 [mlx5_core] mlx5_unregister_device+0x54/0x80 [mlx5_core] mlx5_uninit_one+0x73/0x130 [mlx5_core] remove_one+0x78/0xe0 [mlx5_core] pci_device_remove+0x39/0xa0 | ||||
| CVE-2026-72409 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mvneta: re-enable percpu interrupt on resume On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules NAPI poll, which calls enable_percpu_irq() on completion to unmask. If suspend occurs while NAPI poll is pending (between disable_percpu_irq in the ISR and enable_percpu_irq in poll completion), the interrupt is never re-enabled: 1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule() => MPIC masked, percpu_enabled cpumask bit cleared 2. NAPI poll does not complete before suspend proceeds (on PREEMPT_RT this is highly likely since softirqs run in ksoftirqd which gets frozen; on non-RT it can happen when softirq processing is deferred to ksoftirqd) 3. mvneta_stop_dev => napi_disable(): cancels the pending poll without executing the completion path 4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC (already masked, but records IRQS_SUSPENDED) 5. Resume: mpic_resume checks irq_percpu_is_enabled() => false (bit was cleared in step 1) => skips unmask 6. mvneta_start_dev only restores device-level INTR_NEW_MASK, does not touch the MPIC per-CPU mask Result: MPIC per-CPU interrupt stays masked permanently. The NIC generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never receives them, causing complete loss of network connectivity. Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path to unconditionally unmask the MPIC per-CPU interrupt regardless of pre-suspend state. | ||||
| CVE-2026-72408 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: geneve: gate GRO hint in geneve_gro_complete() on gs->gro_hint geneve_gro_receive() reads the GRO hint through geneve_sk_gro_hint_off(), which honours it only when the socket enabled IFLA_GENEVE_GRO_HINT (gs->gro_hint). geneve_gro_complete() instead calls the low-level geneve_opt_gro_hint_off() and acts on the hint unconditionally. On a tunnel without the hint, receive aggregates the frames as plain ETH_P_TEB while complete still honours an attacker-supplied hint option: it inflates gh_len by gro_hint->nested_hdr_len (u8) and redirects the dispatch type, so the inner gro_complete handler runs at nhoff + gh_len, an offset receive never pulled nor validated, reading out of bounds of the skb head: BUG: KASAN: slab-out-of-bounds in ipv6_gro_complete (net/ipv6/ip6_offload.c:196) Read of size 1 at addr ffff88800fe91980 by task exploit/153 ipv6_gro_complete (net/ipv6/ip6_offload.c:196) geneve_gro_complete (drivers/net/geneve.c:965) udp_gro_complete (net/ipv4/udp_offload.c:940) inet_gro_complete (net/ipv4/af_inet.c:1621) __gro_flush (net/core/gro.c:306) Gate the complete path on gs->gro_hint too via geneve_sk_gro_hint_off(), so both paths agree. Tunnels that enable the hint are unaffected. | ||||
| CVE-2026-72426 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer spill metadata during half-slot cleanup __clean_func_state() cleans dead stack slots in 4-byte halves. When the high half of a STACK_SPILL slot is dead and the low half remains live, cleanup converts the live low half to STACK_MISC or STACK_ZERO and clears the saved spilled_ptr metadata. That conversion is safe only for scalar spills. For a pointer spill, this metadata clear lets a later 32-bit fill from the still-live half avoid the normal non-scalar register-fill check and be treated as an ordinary scalar stack read. Leave non-scalar spill slots intact in this half-live shape. This is conservative for pruning and preserves the existing check_stack_read_fixed_off() rejection path for partial fills from pointer spills. | ||||
| CVE-2026-72186 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: make system files immutable to prevent corruption When a system file such as $Bitmap is exposed via show_sys_files and written from userspace, the volume is corrupted and, because the cluster allocator scans $Bitmap through the same inode's page cache, a write to $Bitmap also deadlocks writeback against the folio it already holds locked. These files are maintained by the driver itself and have no valid reason to be written through the file interface. Mark base metadata files (mft_no < FILE_first_user) as immutable during inode read so the VFS rejects write, mmap, truncate and unlink with -EPERM. Directories are skipped so the root and $Extend remain usable. Internal metadata updates do not go through the VFS write path and are unaffected. | ||||
| CVE-2026-10571 | 4 Apple, Ibm, Linux and 1 more | 9 Macos, Aix, I and 6 more | 2026-08-17 | 5.7 Medium |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 is affected by a denial of service caused by insecure deserialization. A low-privileged, administrative user could exploit this vulnerability to consume system resources when the restConnector-2.0 feature is enabled. | ||||
| CVE-2026-72190 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix mrec_lock ABBA deadlock in rename ntfs_file_fsync(), ntfs_dir_fsync() and __ntfs_write_inode() lock an inode's mrec_lock before taking the mrec_lock of its parent directory. ntfs_rename() takes old_ni->mrec_lock and old_dir_ni->mrec_lock before taking new_ni->mrec_lock for an existing target, or new_dir_ni->mrec_lock for a cross-directory rename. This can deadlock when ntfs_file_fsync() or __ntfs_write_inode() holds the target inode, or when ntfs_dir_fsync() holds a child target directory, while rename() holds the parent directory and waits for the target. Fix this by locking the existing target inode before taking any parent directory mrec_lock. For cross-directory renames where the target parent is a descendant of the source parent, lock the target parent before the source parent so the directory order matches the child-to-parent order used by ntfs_file_fsync(), ntfs_dir_fsync(), and __ntfs_write_inode(). | ||||
| CVE-2026-72470 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: resize log->one_page_buf when adopting on-disk page size log_replay() allocates log->one_page_buf using the page size that was chosen from the host PAGE_SIZE: log->one_page_buf = kmalloc(log->page_size, GFP_NOFS); Later, when a restart area is found, the log page size recorded on disk is adopted: t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size); if (log->page_size != t32) { log->l_size = log->orig_file_size; log->page_size = norm_file_page(t32, &log->l_size, t32 == DefaultLogPageSize); } If the on-disk page size is larger than the size used for the initial allocation, log->page_size grows but one_page_buf is left at its original, smaller size. A subsequent unaligned read_log_page() then reads log->page_size bytes into the undersized scratch buffer: page_buf = page_off ? log->one_page_buf : *buffer; err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf, log->page_size, NULL, &log->read_ahead); overflowing the allocation. This is reachable when mounting a dirty NTFS volume whose log was formatted with a page size larger than the buffer initially allocated on the mounting host (for example a 64K-log volume mounted on a host that allocated a 4K scratch buffer). Grow one_page_buf when the adopted on-disk page size exceeds the size used for the initial allocation. On krealloc() failure the original buffer is left intact and freed by the existing error path. | ||||
| CVE-2026-14525 | 4 Apple, Ibm, Linux and 1 more | 8 Macos, Aix, I and 5 more | 2026-08-17 | 9.4 Critical |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 IBM WebSphere Application Server Liberty is vulnerable to an authentication bypass when the rtcomm-1.0 or rtcommGateway-1.0 feature is enabled. | ||||