Export limit exceeded: 408316 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408316 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 408316 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408316 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23304 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu() l3mdev_master_dev_rcu() can return NULL when the slave device is being un-slaved from a VRF. All other callers deal with this, but we lost the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu() with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418) Call Trace: ip6_pol_route (net/ipv6/route.c:2318) fib6_rule_lookup (net/ipv6/fib6_rules.c:115) ip6_route_output_flags (net/ipv6/route.c:2607) vrf_process_v6_outbound (drivers/net/vrf.c:437) I was tempted to rework the un-slaving code to clear the flag first and insert synchronize_rcu() before we remove the upper. But looks like the explicit fallback to loopback_dev is an established pattern. And I guess avoiding the synchronize_rcu() is nice, too. | ||||
| CVE-2026-23303 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Don't log plaintext credentials in cifs_set_cifscreds When debug logging is enabled, cifs_set_cifscreds() logs the key payload and exposes the plaintext username and password. Remove the debug log to avoid exposing credentials. | ||||
| CVE-2026-23302 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: annotate data-races around sk->sk_{data_ready,write_space} skmsg (and probably other layers) are changing these pointers while other cpus might read them concurrently. Add corresponding READ_ONCE()/WRITE_ONCE() annotations for UDP, TCP and AF_UNIX. | ||||
| CVE-2026-23300 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop When a standalone IPv6 nexthop object is created with a loopback device (e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies it as a reject route. This is because nexthop objects have no destination prefix (fc_dst=::), causing fib6_is_reject() to match any loopback nexthop. The reject path skips fib_nh_common_init(), leaving nhc_pcpu_rth_output unallocated. If an IPv4 route later references this nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and panics. Simplify the check in fib6_nh_init() to only match explicit reject routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback promotion heuristic in fib6_is_reject() is handled separately by ip6_route_info_create_nh(). After this change, the three cases behave as follows: 1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"): RTF_REJECT is set, enters reject path, skips fib_nh_common_init(). No behavior change. 2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. ip6_route_info_create_nh() still promotes it to reject afterward. nhc_pcpu_rth_output is allocated but unused, which is harmless. 3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. nhc_pcpu_rth_output is properly allocated, fixing the crash when IPv4 routes reference this nexthop. | ||||
| CVE-2026-23296 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix refcount leak for tagset_refcnt This leak will cause a hang when tearing down the SCSI host. For example, iscsid hangs with the following call trace: [130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid" #0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4 #1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f #2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0 #3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f #4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b #5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp] #6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi] #7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi] #8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6 #9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef | ||||
| CVE-2026-23293 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If an IPv6 packet is injected into the interface, route_shortcircuit() is called and a NULL pointer dereference happens on neigh_lookup(). BUG: kernel NULL pointer dereference, address: 0000000000000380 Oops: Oops: 0000 [#1] SMP NOPTI [...] RIP: 0010:neigh_lookup+0x20/0x270 [...] Call Trace: <TASK> vxlan_xmit+0x638/0x1ef0 [vxlan] dev_hard_start_xmit+0x9e/0x2e0 __dev_queue_xmit+0xbee/0x14e0 packet_sendmsg+0x116f/0x1930 __sys_sendto+0x1f5/0x200 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x12f/0x1590 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by adding an early check on route_shortcircuit() when protocol is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because VXLAN can be built-in even when IPv6 is built as a module. | ||||
| CVE-2026-23292 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix recursive locking in __configfs_open_file() In flush_write_buffer, &p->frag_sem is acquired and then the loaded store function is called, which, here, is target_core_item_dbroot_store(). This function called filp_open(), following which these functions were called (in reverse order), according to the call trace: down_read __configfs_open_file do_dentry_open vfs_open do_open path_openat do_filp_open file_open_name filp_open target_core_item_dbroot_store flush_write_buffer configfs_write_iter target_core_item_dbroot_store() tries to validate the new file path by trying to open the file path provided to it; however, in this case, the bug report shows: db_root: not a directory: /sys/kernel/config/target/dbroot indicating that the same configfs file was tried to be opened, on which it is currently working on. Thus, it is trying to acquire frag_sem semaphore of the same file of which it already holds the semaphore obtained in flush_write_buffer(), leading to acquiring the semaphore in a nested manner and a possibility of recursive locking. Fix this by modifying target_core_item_dbroot_store() to use kern_path() instead of filp_open() to avoid opening the file using filesystem-specific function __configfs_open_file(), and further modifying it to make this fix compatible. | ||||
| CVE-2026-23291 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: properly drop the usb interface reference on disconnect When the device is disconnected from the driver, there is a "dangling" reference count on the usb interface that was grabbed in the probe callback. Fix this up by properly dropping the reference after we are done with it. | ||||
| CVE-2026-23290 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: validate USB endpoints The pegasus driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints. | ||||
| CVE-2026-23287 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/sifive-plic: Fix frozen interrupt due to affinity setting PLIC ignores interrupt completion message for disabled interrupt, explained by the specification: The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that is currently enabled for the target, the completion is silently ignored. This caused problems in the past, because an interrupt can be disabled while still being handled and plic_irq_eoi() had no effect. That was fixed by checking if the interrupt is disabled, and if so enable it, before sending the completion message. That check is done with irqd_irq_disabled(). However, that is not sufficient because the enable bit for the handling hart can be zero despite irqd_irq_disabled(d) being false. This can happen when affinity setting is changed while a hart is still handling the interrupt. This problem is easily reproducible by dumping a large file to uart (which generates lots of interrupts) and at the same time keep changing the uart interrupt's affinity setting. The uart port becomes frozen almost instantaneously. Fix this by checking PLIC's enable bit instead of irqd_irq_disabled(). | ||||
| CVE-2026-23284 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: Reset prog ptr to old_prog in case of error in mtk_xdp_setup() Reset eBPF program pointer to old_prog and do not decrease its ref-count if mtk_open routine in mtk_xdp_setup() fails. | ||||
| CVE-2026-23281 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix use-after-free in lbs_free_adapter() The lbs_free_adapter() function uses timer_delete() (non-synchronous) for both command_timer and tx_lockup_timer before the structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If a timer callback is executing when lbs_free_adapter() is called, the callback will access freed memory since lbs_cfg_free() frees the containing structure immediately after lbs_free_adapter() returns. Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler) access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields, which would all be use-after-free violations. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. This bug was introduced in commit 8f641d93c38a ("libertas: detect TX lockups and reset hardware") where del_timer() was used instead of del_timer_sync() in the cleanup path. The command_timer has had the same issue since the driver was first written. | ||||
| CVE-2026-23279 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame() In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced at lines 1638 and 1642 without a prior NULL check: ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl; ... pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value); The mesh_matches_local() check above only validates the Mesh ID, Mesh Configuration, and Supported Rates IEs. It does not verify the presence of the Mesh Channel Switch Parameters IE (element ID 118). When a received CSA action frame omits that IE, ieee802_11_parse_elems() leaves elems->mesh_chansw_params_ie as NULL, and the unconditional dereference causes a kernel NULL pointer dereference. A remote mesh peer with an established peer link (PLINK_ESTAB) can trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame that includes a matching Mesh ID and Mesh Configuration IE but omits the Mesh Channel Switch Parameters IE. No authentication beyond the default open mesh peering is required. Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211] CR2: 0000000000000000 Fix by adding a NULL check for mesh_chansw_params_ie after mesh_matches_local() returns, consistent with how other optional IEs are guarded throughout the mesh code. The bug has been present since v3.13 (released 2014-01-19). | ||||
| CVE-2026-23278 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: always walk all pending catchall elements During transaction processing we might have more than one catchall element: 1 live catchall element and 1 pending element that is coming as part of the new batch. If the map holding the catchall elements is also going away, its required to toggle all catchall elements and not just the first viable candidate. Otherwise, we get: WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404 RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables] [..] __nft_set_elem_destroy+0x106/0x380 [nf_tables] nf_tables_abort_release+0x348/0x8d0 [nf_tables] nf_tables_abort+0xcf2/0x3ac0 [nf_tables] nfnetlink_rcv_batch+0x9c9/0x20e0 [..] | ||||
| CVE-2026-23277 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit through slave devices, but does not update skb->dev to the slave device beforehand. When a gretap tunnel is a TEQL slave, the transmit path reaches iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0 master) and later calls iptunnel_xmit_stats(dev, pkt_len). This function does: get_cpu_ptr(dev->tstats) Since teql_master_setup() does not set dev->pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes NULL + __per_cpu_offset[cpu], resulting in a page fault. BUG: unable to handle page fault for address: ffff8880e6659018 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 68bc067 P4D 68bc067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN PTI RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89) Call Trace: <TASK> ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) __gre_xmit (net/ipv4/ip_gre.c:478) gre_tap_xmit (net/ipv4/ip_gre.c:779) teql_master_xmit (net/sched/sch_teql.c:319) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) neigh_direct_output (net/core/neighbour.c:1660) ip_finish_output2 (net/ipv4/ip_output.c:237) __ip_finish_output.part.0 (net/ipv4/ip_output.c:315) ip_mc_output (net/ipv4/ip_output.c:369) ip_send_skb (net/ipv4/ip_output.c:1508) udp_send_skb (net/ipv4/udp.c:1195) udp_sendmsg (net/ipv4/udp.c:1485) inet_sendmsg (net/ipv4/af_inet.c:859) __sys_sendto (net/socket.c:2206) Fix this by setting skb->dev = slave before calling netdev_start_xmit(), so that tunnel xmit functions see the correct slave device with properly allocated tstats. | ||||
| CVE-2026-23274 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels IDLETIMER revision 0 rules reuse existing timers by label and always call mod_timer() on timer->timer. If the label was created first by revision 1 with XT_IDLETIMER_ALARM, the object uses alarm timer semantics and timer->timer is never initialized. Reusing that object from revision 0 causes mod_timer() on an uninitialized timer_list, triggering debugobjects warnings and possible panic when panic_on_warn=1. Fix this by rejecting revision 0 rule insertion when an existing timer with the same label is of ALARM type. | ||||
| CVE-2026-23273 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: observe an RCU grace period in macvlan_common_newlink() error path valis reported that a race condition still happens after my prior patch. macvlan_common_newlink() might have made @dev visible before detecting an error, and its caller will directly call free_netdev(dev). We must respect an RCU period, either in macvlan or the core networking stack. After adding a temporary mdelay(1000) in macvlan_forward_source_one() to open the race window, valis repro was: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source (ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4 PING 1.2.3.4 (1.2.3.4): 56 data bytes RTNETLINK answers: Invalid argument BUG: KASAN: slab-use-after-free in macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) Read of size 8 at addr ffff888016bb89c0 by task e/175 CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) kasan_report (mm/kasan/report.c:597) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) ? tasklet_init (kernel/softirq.c:983) macvlan_handle_frame (drivers/net/macvlan.c:501) Allocated by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) __kasan_kmalloc (mm/kasan/common.c:419) __kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657 mm/slub.c:7140) alloc_netdev_mqs (net/core/dev.c:12012) rtnl_create_link (net/core/rtnetlink.c:3648) rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Freed by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kfree (mm/slub.c:6674 mm/slub.c:6882) rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) | ||||
| CVE-2026-23272 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally bump set->nelems before insertion In case that the set is full, a new element gets published then removed without waiting for the RCU grace period, while RCU reader can be walking over it already. To address this issue, add the element transaction even if set is full, but toggle the set_full flag to report -ENFILE so the abort path safely unwinds the set to its previous state. As for element updates, decrement set->nelems to restore it. A simpler fix is to call synchronize_rcu() in the error path. However, with a large batch adding elements to already maxed-out set, this could cause noticeable slowdown of such batches. | ||||
| CVE-2026-23271 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix __perf_event_overflow() vs perf_remove_from_context() race Make sure that __perf_event_overflow() runs with IRQs disabled for all possible callchains. Specifically the software events can end up running it with only preemption disabled. This opens up a race vs perf_event_exit_event() and friends that will go and free various things the overflow path expects to be present, like the BPF program. | ||||
| CVE-2026-23270 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks As Paolo said earlier [1]: "Since the blamed commit below, classify can return TC_ACT_CONSUMED while the current skb being held by the defragmentation engine. As reported by GangMin Kim, if such packet is that may cause a UaF when the defrag engine later on tries to tuch again such packet." act_ct was never meant to be used in the egress path, however some users are attaching it to egress today [2]. Attempting to reach a middle ground, we noticed that, while most qdiscs are not handling TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we address the issue by only allowing act_ct to bind to clsact/ingress qdiscs and shared blocks. That way it's still possible to attach act_ct to egress (albeit only with clsact). [1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/ [2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ | ||||