Export limit exceeded: 409361 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25376 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25376 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80690 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL pointer dereference in the device teardown path if ufs_rpmb_probe() fails. | ||||
| CVE-2026-80648 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: spacemit: fix NULL check in spacemit_pin_set_config spacemit_pin_set_config() looks up the per-pin descriptor with spacemit_get_pin() then checks the wrong variable for failure: const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin); ... if (!pin) return -EINVAL; reg = spacemit_pin_to_reg(pctrl, spin->pin); pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a valid pin, so rejecting it here drops the PAD config write for the first pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as its first entry, so its drive-strength / bias configuration was silently ignored. The intended guard is against spacemit_get_pin() returning NULL when the pin id isn't in the SoC's pin table. Check spin instead, which both restores PAD setup for pin 0 and prevents a NULL deref on spin->pin. | ||||
| CVE-2026-80652 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Treat zero-length cert chain as query for blob lengths When handling a PDH export, treat a zero-length userspace cert chain buffer as a request to query the length of the relevant blobs. Failure to account for the zero-length buffer trips a BUG_ON() when running with CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation). kernel BUG at arch/x86/mm/physaddr.c:28 ! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded Tainted: G W 6.18.16-smp-DEV #1 NONE Tainted: [W]=WARN Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28 RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293 RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600 RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010 RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000 R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000 FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308 [<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556 [<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline] [<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline] [<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584 [<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline] [<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98 [<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fd3158eac39 </TASK> Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting the physical address is just arithmetic, and the PSP errors out before trying to write to the garbage address (which it must, otherwise querying the blob lengths would clobber memory at pfn=0). | ||||
| CVE-2026-80654 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Shutdown and free rx mailbox channel A mbox rx channel is requested using mbox_request_channel_byname() in probe. In remove callback, the rx mailbox channel is cleaned up when the rx_chan is NULL due to incorrect condition check. The mailbox channel is not shutdown and it can receive messages even after the device removal. This leads to use after free. Also the channel resources are not freed. Fix this by checking the rx_chan correctly. | ||||
| CVE-2026-80632 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix NULL pointer dereference in mt7996_init_tx_queues() When MT76_NPU and CONFIG_NET_MEDIATEK_SOC_WED are enabled and mt76 detects properly the Airoha NPU SoC, mt7996_init_tx_queues() will dereference a NULL WED pointer. Fix the issue by always passing the WED pointer from mt7996_dma_init(). | ||||
| CVE-2026-80595 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - add response length checks The driver processes response data from device buffers without verifying that the device actually sent enough data. This can lead to out-of-bounds reads or processing stale data. Add checks for the expected response length before accessing the buffers. | ||||
| CVE-2026-80651 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL dsm_create() initially checks pdev->bus when computing segment_id: u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0; But the next two lines unconditionally dereference pdev->bus via pcie_find_root_port() and especially pci_dev_id(pdev), which expands to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact NULL, segment_id is initialised to 0 but the very next statement crashes the kernel. smatch flags this: drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we previously assumed 'pdev->bus' could be null (see line 251) Make the NULL handling consistent: if pdev->bus is NULL the device has no PCI context to work with and SEV TIO setup cannot proceed, so return -ENODEV before any of the bus-dependent lookups. The remaining initialisation now runs only on the path where pdev->bus is known to be valid. No change for callers where pdev->bus is non-NULL, which is the only case where dsm_create() did meaningful work before this change. | ||||
| CVE-2026-80657 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer The management mailbox channel cleanup helpers can be called from error handling paths when mgmt_chann has already been destroyed. Add NULL checks to xdna_mailbox_free_channel() and xdna_mailbox_stop_channel() so the cleanup path safely returns instead of dereferencing a NULL mailbox channel pointer. | ||||
| CVE-2026-80597 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix NULL pointer dereference in initialization The mtd_info contains a struct device, which must be linked to its parent. Without this, the initialization of the MTD fails with a NULL pointer dereference. | ||||
| CVE-2026-80616 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns() It's pointless to call WARN_ON() in case of an allocation failure in dev_change_net_namespace() and device_rename(), since it only leads to useless splats caused by deliberate fault injections, so avoid it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-80620 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/MSI: Unmap MSI-X region on error" This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202. Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an iounmap(dev->msix_base) on the error path of msix_capability_init() to release the MSI-X region when msix_setup_interrupts() fails. When msix_setup_interrupts() fails, the call chain is: msix_setup_interrupts() -> __msix_setup_interrupts() struct pci_dev *dev __free(free_msi_irqs) = __dev; ... return ret; // __free cleanup fires on error The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which already handles the unmap: void pci_free_msi_irqs(struct pci_dev *dev) { pci_msi_teardown_msi_irqs(dev); if (dev->msix_base) { iounmap(dev->msix_base); // already unmapped here dev->msix_base = NULL; // and set to NULL } } So dev->msix_base is unmapped and set to NULL before msix_setup_interrupts() returns to msix_capability_init(). The "goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") then calls iounmap() a second time on a NULL pointer. This was reproduced on Intel Emerald Rapids (192 CPUs) while running tools/testing/selftests/kexec/test_kexec_jump.sh: WARNING: CPU#44 at iounmap+0x2a/0xe0 RIP: 0010:iounmap+0x2a/0xe0 RDI: 0000000000000000 Call Trace: msix_capability_init+0x317/0x3f0 __pci_enable_msix_range+0x21d/0x2c0 pci_alloc_irq_vectors_affinity+0xa9/0x130 nvme_setup_io_queues+0x2a8/0x420 [nvme] nvme_reset_work+0x151/0x340 [nvme] ... RDI=0 confirms iounmap() is called with NULL. Restore the original "goto out_disable" and leave the unmap to the existing __free(free_msi_irqs) cleanup. | ||||
| CVE-2026-80556 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition In atmci_probe, &host->bh_work is bound with atmci_work_func, and atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all queue this work on system_bh_wq. If we remove the module, atmci_remove makes cleanup and the memory allocated for host with devm_kzalloc() is released after the remove callback returns, while the work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | atmci_interrupt | queue_work(system_bh_wq, | &host->bh_work) atmci_remove | atmci_cleanup_slot(...) | atmci_writel(host, ATMCI_IDR, ~0UL) | timer_delete_sync(&host->timer) | dma_release_channel(host->dma.chan) | free_irq(platform_get_irq(pdev, 0), host) | | atmci_work_func | // use host // devm resources released after | // remove returns, host is freed | | // use host (use-after-free) Fix it by canceling the work after all the sources that can schedule it (IRQ handler, timeout timer and DMA completion callback) have been stopped, and before proceeding with the remaining cleanup in atmci_remove. | ||||
| CVE-2026-80560 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: signal: do not restore privileged SR bits on sigreturn restore_sigcontext() copies the whole supervision register (SR) from the signal frame and only clears SPR_SR_SM before the value is reloaded into the hardware SR (through ESR and l.rfe) on the return to user space. All other SR bits are left under user control. An unprivileged task can thus return from a signal handler through a crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the CPU performs no translation or protection on data accesses, so the task gains read and write access to arbitrary physical memory, a local privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH and the cache-enable bits are exposed the same way. The ptrace GPR regset already refuses any change to SR for exactly this reason. Restore only the arithmetic flag bits (F, CY, OV) from the signal frame and take every privileged control bit from the SR the kernel saved on signal entry. Verified with qemu-system-or1k -M or1k-sim: before this change an unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the same PoC receives SIGSEGV and physical memory is unchanged. | ||||
| CVE-2026-74751 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: riscv: lib: Fix ZBB strnlen reading past count boundary The ZBB-optimized strnlen loop loads one word ahead before checking the aligned boundary: REG_L t1, SZREG(t0) // load next word addi t0, t0, SZREG // advance orc.b t1, t1 bgeu t0, t4, 4f // boundary check AFTER load where t4 = (s + count) & -SZREG. When s is aligned and count is a multiple of SZREG, t4 equals s + count and the loop loads a full word starting at exactly s + count. If s + count falls on a page boundary with the next page unmapped, this faults. Fix by computing the aligned boundary from the last valid byte (s + count - 1) instead of s + count. This makes the loop stop at the word containing the last valid byte rather than potentially loading the word after it. The count == 0 case is already handled by the beqz early exit. Also add a pre-loop guard (bgeu t0, t4) for the case where all valid bytes fit within the first word. With the adjusted boundary, t4 can equal t0, and entering the loop with stale register state from the first-word processing would produce incorrect results. The final minu clamp ensures the result is still correct when the last loaded word extends past s + count - 1 within the same aligned word. | ||||
| CVE-2026-80583 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but tx-macro was missed. On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value sanity check catches the 4 bytes written past the enumerated item and every read of these controls fails with -EINVAL: snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow | ||||
| CVE-2026-80562 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: ml-ioh: use raw_spinlock_t for the register lock ioh_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. ioh_irq_enable() and ioh_irq_disable() take the same lock from the .irq_enable/.irq_disable callbacks, which are likewise invoked with desc->lock held. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, and those critical sections only perform short sequences of MMIO register accesses (ioread32()/iowrite32()); the .irq_set_type callback additionally emits a dev_warn() on an unsupported type. None of these are sleepable operations, so keeping this register lock non-sleeping is appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same fix as commit a02b8950d619 ("gpio: pch: use raw_spinlock_t for the register lock"); this driver shares the same structure as gpio-pch. | ||||
| CVE-2026-72075 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix race condition in reset_device sysfs callback The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command() without acquiring pcu->cmd_mutex. This can lead to data races and corruption of the shared command buffer if triggered concurrently with other commands. Acquire pcu->cmd_mutex before calling ims_pcu_execute_command(). | ||||
| CVE-2026-80555 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Free all memory if cp_init() fails The routine cp_free() is called to unpin/free any memory once an I/O is completed successfully, or if cp_prefetch() fails. But if cp_init() fails, and cp->initialized is not enabled, the same routine cannot be used to free all the memory. An attempt to address this exists in ccwchain_handle_ccw(), where a single call to ccwchain_free() is made for the currently-processed CCW segment. But this will leak other segments (created as a result of a Transfer in Channel) that had been allocated as part of the same channel program. Address this by performing the cleanup outside of the recursive ccwchain_handle_ccw()/ccwchain_loop_tic() logic. | ||||
| CVE-2026-80534 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix ilock leak on error in xfs_dq_get_next_id xfs_dq_get_next_id() takes the quota inode ILOCK before calling xfs_iread_extents(). If xfs_iread_extents() fails, the function returns immediately without releasing the lock, leaking the quota inode ILOCK. This can leave the quota inode locked and cause subsequent quota operations to hang. Fix this by jumping to a common unlock path on error instead of returning directly. | ||||
| CVE-2026-74657 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops fib_nlmsg_size() still estimates nexthop space as if every gateway is encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA. As a result, route notifications can allocate an skb that is too small. fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With panic_on_warn set, this becomes a kernel panic. Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is actually present. | ||||