Export limit exceeded: 25283 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25283 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80651 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL dsm_create() initially checks pdev->bus when computing segment_id: u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0; But the next two lines unconditionally dereference pdev->bus via pcie_find_root_port() and especially pci_dev_id(pdev), which expands to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact NULL, segment_id is initialised to 0 but the very next statement crashes the kernel. smatch flags this: drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we previously assumed 'pdev->bus' could be null (see line 251) Make the NULL handling consistent: if pdev->bus is NULL the device has no PCI context to work with and SEV TIO setup cannot proceed, so return -ENODEV before any of the bus-dependent lookups. The remaining initialisation now runs only on the path where pdev->bus is known to be valid. No change for callers where pdev->bus is non-NULL, which is the only case where dsm_create() did meaningful work before this change. | ||||
| CVE-2026-80657 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer The management mailbox channel cleanup helpers can be called from error handling paths when mgmt_chann has already been destroyed. Add NULL checks to xdna_mailbox_free_channel() and xdna_mailbox_stop_channel() so the cleanup path safely returns instead of dereferencing a NULL mailbox channel pointer. | ||||
| CVE-2026-80597 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix NULL pointer dereference in initialization The mtd_info contains a struct device, which must be linked to its parent. Without this, the initialization of the MTD fails with a NULL pointer dereference. | ||||
| CVE-2026-80616 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns() It's pointless to call WARN_ON() in case of an allocation failure in dev_change_net_namespace() and device_rename(), since it only leads to useless splats caused by deliberate fault injections, so avoid it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-80620 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/MSI: Unmap MSI-X region on error" This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202. Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an iounmap(dev->msix_base) on the error path of msix_capability_init() to release the MSI-X region when msix_setup_interrupts() fails. When msix_setup_interrupts() fails, the call chain is: msix_setup_interrupts() -> __msix_setup_interrupts() struct pci_dev *dev __free(free_msi_irqs) = __dev; ... return ret; // __free cleanup fires on error The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which already handles the unmap: void pci_free_msi_irqs(struct pci_dev *dev) { pci_msi_teardown_msi_irqs(dev); if (dev->msix_base) { iounmap(dev->msix_base); // already unmapped here dev->msix_base = NULL; // and set to NULL } } So dev->msix_base is unmapped and set to NULL before msix_setup_interrupts() returns to msix_capability_init(). The "goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") then calls iounmap() a second time on a NULL pointer. This was reproduced on Intel Emerald Rapids (192 CPUs) while running tools/testing/selftests/kexec/test_kexec_jump.sh: WARNING: CPU#44 at iounmap+0x2a/0xe0 RIP: 0010:iounmap+0x2a/0xe0 RDI: 0000000000000000 Call Trace: msix_capability_init+0x317/0x3f0 __pci_enable_msix_range+0x21d/0x2c0 pci_alloc_irq_vectors_affinity+0xa9/0x130 nvme_setup_io_queues+0x2a8/0x420 [nvme] nvme_reset_work+0x151/0x340 [nvme] ... RDI=0 confirms iounmap() is called with NULL. Restore the original "goto out_disable" and leave the unmap to the existing __free(free_msi_irqs) cleanup. | ||||
| CVE-2026-80556 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition In atmci_probe, &host->bh_work is bound with atmci_work_func, and atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all queue this work on system_bh_wq. If we remove the module, atmci_remove makes cleanup and the memory allocated for host with devm_kzalloc() is released after the remove callback returns, while the work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | atmci_interrupt | queue_work(system_bh_wq, | &host->bh_work) atmci_remove | atmci_cleanup_slot(...) | atmci_writel(host, ATMCI_IDR, ~0UL) | timer_delete_sync(&host->timer) | dma_release_channel(host->dma.chan) | free_irq(platform_get_irq(pdev, 0), host) | | atmci_work_func | // use host // devm resources released after | // remove returns, host is freed | | // use host (use-after-free) Fix it by canceling the work after all the sources that can schedule it (IRQ handler, timeout timer and DMA completion callback) have been stopped, and before proceeding with the remaining cleanup in atmci_remove. | ||||
| CVE-2026-80560 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: signal: do not restore privileged SR bits on sigreturn restore_sigcontext() copies the whole supervision register (SR) from the signal frame and only clears SPR_SR_SM before the value is reloaded into the hardware SR (through ESR and l.rfe) on the return to user space. All other SR bits are left under user control. An unprivileged task can thus return from a signal handler through a crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the CPU performs no translation or protection on data accesses, so the task gains read and write access to arbitrary physical memory, a local privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH and the cache-enable bits are exposed the same way. The ptrace GPR regset already refuses any change to SR for exactly this reason. Restore only the arithmetic flag bits (F, CY, OV) from the signal frame and take every privileged control bit from the SR the kernel saved on signal entry. Verified with qemu-system-or1k -M or1k-sim: before this change an unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the same PoC receives SIGSEGV and physical memory is unchanged. | ||||
| CVE-2026-74751 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: riscv: lib: Fix ZBB strnlen reading past count boundary The ZBB-optimized strnlen loop loads one word ahead before checking the aligned boundary: REG_L t1, SZREG(t0) // load next word addi t0, t0, SZREG // advance orc.b t1, t1 bgeu t0, t4, 4f // boundary check AFTER load where t4 = (s + count) & -SZREG. When s is aligned and count is a multiple of SZREG, t4 equals s + count and the loop loads a full word starting at exactly s + count. If s + count falls on a page boundary with the next page unmapped, this faults. Fix by computing the aligned boundary from the last valid byte (s + count - 1) instead of s + count. This makes the loop stop at the word containing the last valid byte rather than potentially loading the word after it. The count == 0 case is already handled by the beqz early exit. Also add a pre-loop guard (bgeu t0, t4) for the case where all valid bytes fit within the first word. With the adjusted boundary, t4 can equal t0, and entering the loop with stale register state from the first-word processing would produce incorrect results. The final minu clamp ensures the result is still correct when the last loaded word extends past s + count - 1 within the same aligned word. | ||||
| CVE-2026-80583 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but tx-macro was missed. On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value sanity check catches the 4 bytes written past the enumerated item and every read of these controls fails with -EINVAL: snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow | ||||
| CVE-2026-80562 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: ml-ioh: use raw_spinlock_t for the register lock ioh_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. ioh_irq_enable() and ioh_irq_disable() take the same lock from the .irq_enable/.irq_disable callbacks, which are likewise invoked with desc->lock held. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, and those critical sections only perform short sequences of MMIO register accesses (ioread32()/iowrite32()); the .irq_set_type callback additionally emits a dev_warn() on an unsupported type. None of these are sleepable operations, so keeping this register lock non-sleeping is appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same fix as commit a02b8950d619 ("gpio: pch: use raw_spinlock_t for the register lock"); this driver shares the same structure as gpio-pch. | ||||
| CVE-2026-72075 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix race condition in reset_device sysfs callback The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command() without acquiring pcu->cmd_mutex. This can lead to data races and corruption of the shared command buffer if triggered concurrently with other commands. Acquire pcu->cmd_mutex before calling ims_pcu_execute_command(). | ||||
| CVE-2026-80555 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Free all memory if cp_init() fails The routine cp_free() is called to unpin/free any memory once an I/O is completed successfully, or if cp_prefetch() fails. But if cp_init() fails, and cp->initialized is not enabled, the same routine cannot be used to free all the memory. An attempt to address this exists in ccwchain_handle_ccw(), where a single call to ccwchain_free() is made for the currently-processed CCW segment. But this will leak other segments (created as a result of a Transfer in Channel) that had been allocated as part of the same channel program. Address this by performing the cleanup outside of the recursive ccwchain_handle_ccw()/ccwchain_loop_tic() logic. | ||||
| CVE-2026-80534 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix ilock leak on error in xfs_dq_get_next_id xfs_dq_get_next_id() takes the quota inode ILOCK before calling xfs_iread_extents(). If xfs_iread_extents() fails, the function returns immediately without releasing the lock, leaking the quota inode ILOCK. This can leave the quota inode locked and cause subsequent quota operations to hang. Fix this by jumping to a common unlock path on error instead of returning directly. | ||||
| CVE-2026-74657 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops fib_nlmsg_size() still estimates nexthop space as if every gateway is encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA. As a result, route notifications can allocate an skb that is too small. fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With panic_on_warn set, this becomes a kernel panic. Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is actually present. | ||||
| CVE-2026-74655 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1. | ||||
| CVE-2026-74653 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked(). LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR read to clear the condition, then calls serial8250_handle_irq_locked(). No real received data is ever discarded, and it is a no-op on healthy UARTs which never report a timeout with DR clear. This is the same class of bug already worked around in other 8250 drivers; see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt") which reports the identical iir=0xcc/lsr=0x60. See also UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. | ||||
| CVE-2026-74650 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in WMM_param_handler() WMM_param_handler() copies a fixed-size WMM parameter element out of a received information element without checking that the element is long enough, causing an out-of-bounds read for a short WMM IE. The handler reads sizeof(struct WMM_para_element) (18) bytes at pIE->data + 6, so it requires pIE->length to be at least 24 (WLAN_WMM_LEN), but it never validates the length. Two of its three callers reach it after matching only the WMM OUI: OnAssocRsp() in rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a 4-byte OUI, before calling the handler. A vendor-specific IE carrying the WMM OUI but a length between 6 and 23, placed in an association response or in the IE blob handed to join_cmd_hdl(), passes the OUI check and then makes the memcmp() and memcpy() at pIE->data + 6 read past the end of the element. OnAssocRsp() parses a frame received from the AP, so this is reachable from a remote peer. The remaining caller in rtw_wlan_util.c already guards the handler with "pIE->length == WLAN_WMM_LEN". Move the equivalent check into the handler itself so every caller is covered; the sibling IE handlers in the same parsing loop (HT_caps_handler(), HT_info_handler(), ERP_IE_handler()) likewise bound their accesses by pIE->length. | ||||
| CVE-2026-74647 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Remove buffer from list prior to unmap operation fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is getting removed from the list after it is unmapped from DSP. This can create potential race conditions if multiple threads invoke unmap concurrently, where one thread may remove the entry from the list while another thread's unmap operation is still ongoing. Fix this by removing the buffer entry from the list before calling the unmap operation. If the unmap fails, the entry is re-added to the list so that userspace can retry the unmap, or alternatively, the buffer will be cleaned up during device release when the DSP process is torn down and all DSP-side mappings are freed along with remaining buffers in the list. | ||||
| CVE-2026-74632 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix huge_zero_pfn race Patch series "mm/huge_memory: fix huge_zero_pfn race", v2. There is a subtle race in the reference-counted huge_zero_folio implementation. The fast path atomic logic fails to account for the fact that the shrinker (which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a racing get_huge_zero_folio() installed a valid value there. This results in huge_zero_folio being correctly set but huge_zero_pfn being set incorrectly and thus is_huge_zero_pfn() and consequently is_huge_zero_pmd() will misidentify the huge zero folio as being an ordinary THP folio. This can result in the huge zero folio being split and otherwise treated incorrectly. The solution to this is very subtle as there is an atomic fast path, and thus ordering in weakly ordered architectures has to be treated very carefully. The first commit fixes the issue by introducing a spinlock around huge_zero_[pfn, folio, refcount] write, with careful consideration paid to load/store ordering in the fast path. It is placed first and kept as small as possible so that it can be backported on its own. The second commit is a pure cleanup which reworks the CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic to better separate the persistent logic from the dynamically allocated one. This patch (of 2): If !CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, the huge_zero_folio is refcounted by huge_zero_refcount and returned by mm_get_huge_zero_folio(). When the caller is done with the huge zero page, its reference count is decremented. Only a shrinker can set the reference count to zero. A race can unfortunately occur between a shrinker decrementing the reference count to zero and a concurrent page fault. This is because shrink_huge_zero_folio_scan() might, if very unlucky, be preempted between setting huge_zero_refcount to zero and writing an invalid value. During this time get_huge_zero_folio() could write to huge_zero_pfn before shrink_huge_zero_folio_scan() resumes. In this event the huge zero folio will be persistently misidentified causing the THP code path to be entered inappropriately for the huge zero folio: CPU 0 CPU 1 =======================================|================================= shrink_huge_zero_folio_scan() | atomic_cmpxchg() sets refcount to 0 | xchg() sets huge_zero_folio to NULL | get_huge_zero_folio() | | atomic_inc_not_zero() -> zero preempted for a long time | Allocate new huge zero folio | | Write valid huge_zero_folio v | Write valid huge_zero_pfn Overwrite huge_zero_pfn with ~0UL <--- Invalid overwrite! This results in is_huge_zero_pfn() and is_huge_zero_pmd() incorrectly returning false for a huge zero page which could result in issues like the huge zero folio being incorrectly split. Note that the issue is with huge_zero_pfn not huge_zero_folio, as get_huge_zero_folio() uses cmpxchg() gated on huge_zero_folio being NULL with a retry loop and shrink_huge_zero_folio_scan() uses xchg() to set huge_zero_folio. Fix the issue by introducing a spinlock, huge_zero_lock, to prevent concurrent write of huge_zero_folio, huge_zero_pfn and huge_zero_refcount. There needs to be significant care taken here to ensure correctness: The fast path in get_huge_zero_folio() uses atomic_inc_not_zero(), which is outside of the critical section, and means huge zero allocation is gated on zero huge_zero_refcount. The fast path doesn't use huge_zero_lock, so the critical section is irrelevant to it. So invariants are required - huge_zero_refcount MUST: * Only be set in the huge_zero_lock critical section to ensure serialisation of huge_zero_pfn, huge_zero_folio and ---truncated--- | ||||
| CVE-2026-74628 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free of the socket by its timers The x25 timers are armed with mod_timer() and cancelled with timer_delete(), so a pending timer holds no reference on the socket and a cancel does not wait for a callback already running on another CPU. x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall sk->sk_timer after __x25_destroy_socket() has passed its cancel point. The following __sock_put() frees the socket while the timer is still queued, and the next expiry uses freed memory. KASAN reports a slab-use-after-free on the kmalloc-2k object freed by close(). timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and x25_timer_expiry() both reach the cancels from inside the timer they would wait on, through __x25_destroy_socket() and x25_disconnect(). Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer() so that an armed timer owns a reference, and release it in both expiry handlers. Rearm the heartbeat only while sk_hashed(sk) is still true, since __x25_destroy_socket() unlinks the socket before dropping it. Arm the deferred destroy timer the same way and drop its reference in x25_destroy_timer(). Reproduced on net with KASAN, with the heartbeat period shortened so the window recurs. With this patch the reproducer no longer triggers a report and /proc/net/x25 drains. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||