Export limit exceeded: 25283 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25283 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80672 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix u16 truncation of restart-area length check ntfs_check_restart_area() validates that the $LogFile restart area and its trailing log client record array fit within the system page size: u16 ra_ofs, ra_len, ca_ofs; ... ra_len = ca_ofs + le16_to_cpu(ra->log_clients) * sizeof(struct log_client_record); if (ra_ofs + ra_len > le32_to_cpu(rp->system_page_size) || ...) return false; ra_len is u16, but the right-hand side is computed in size_t (sizeof(struct log_client_record) == 160). Both ca_ofs and log_clients come straight from the on-disk restart area. With an on-disk log_clients of 410 the product 410 * 160 = 65600; adding ca_ofs and storing into the u16 ra_len truncates modulo 65536 (e.g. ca_ofs 64 gives ra_len 128), so the "fits in the page" check passes even though the client array described by log_clients extends far beyond the page. ntfs_check_log_client_array() then walks the array bounded only by the on-disk log_clients count: cr = ca + idx; if (cr->prev_client != LOGFILE_NO_CLIENT) ... For log_clients 410 it dereferences records up to ca + 409 * 160, ~64 KiB past the kvzalloc(system_page_size) restart-page buffer -- an out-of-bounds read of attacker-controlled extent, reachable when a crafted NTFS image is mounted (load_and_check_logfile() at mount time). This is the in-kernel analogue of CVE-2022-30789, fixed in the ntfs-3g userspace driver but never in this revived classic driver. Compute the restart-area length in a u32 so the existing bounds check rejects an over-large client array instead of being defeated by the truncation. Widen ra_ofs and ca_ofs to u32 as well: both are loaded from __le16 on-disk fields and every comparison already promotes to int/size_t, so this changes no result and keeps the declaration uniform. | ||||
| CVE-2026-80649 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix OOB in scmi_power_name_get() scmi_power_name_get() does not validate the domain number passed by the external caller, which may lead to an out-of-bounds access. Fix this by returning "unknown" for invalid domains, like scmi_reset_name_get() does. | ||||
| CVE-2026-80661 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ufs: core: tracing: Do not dereference pointers in TP_printk() The trace events in drivers/ufs/core/ufs_trace.h were converted to take a pointer to the hba structure as an argument for the tracepoint and then in TP_printk() the printing of the dev_name from the ring buffer was converted to using the dev dereferenced pointer from the hba saved pointer. This is not allowed as the TP_printk() is executed at the time the trace event is read from /sys/kernel/tracing/trace file. That can happen literally, seconds, minutes, hours, weeks, days, or even months later! There is no guarantee that the hba pointer will still exist by the time it is dereferenced when the "trace" file is read. Instead, save the device name from the hba pointer at the time the tracepoint is called and place it into the ring buffer event. Then the TP_printk() can read the name directly from the ring buffer and remove the possibility that it will read a freed pointer and crash the kernel. This was detected when testing the trace event code that looks for TP_printk() parameters doing illegal derferences[1] [1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/ | ||||
| CVE-2026-80600 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: acquire ARP hw source only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. | ||||
| CVE-2026-80673 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: bound the look-ahead attribute-list entry in ntfs_external_attr_find() When resolving an attribute lookup with a non-zero @lowest_vcn, ntfs_external_attr_find() peeks at the next $ATTRIBUTE_LIST entry to decide whether to keep searching, but bounds that not-yet-validated entry only with "(u8 *)next_al_entry + 6 < al_end" (which proves just bytes 0..6 are in range) and "(u8 *)next_al_entry + length <= al_end" with an attacker-controlled, non-8-aligned length. It then reads next_al_entry->lowest_vcn (an __le64 at offset 8) and the name at next_al_entry->name_offset, both of which can lie past al_end -- the exact end of the kvmalloc'd attribute-list buffer (allocated at the on-disk attr_list_size, no rounding). A crafted on-disk $ATTRIBUTE_LIST whose last entry sits a few bytes before al_end therefore yields a slab out-of-bounds read when the inode is read. Validate the look-ahead entry with ntfs_attr_list_entry_is_valid() (added in patch 1/3) before dereferencing lowest_vcn and the name, so the same fixed-header, length and name bounds the main attribute-list walk uses now guard this read too. | ||||
| CVE-2026-74742 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: veth: fix queue index used to wake the peer txq in veth_poll veth_poll() derives the index of the peer TX queue to wake from rq->xdp_rxq.queue_index. That field is only initialized by xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an XDP program is attached. On the plain GRO/NAPI path (veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so queue_index stays 0 for every queue, as priv->rq is zero-allocated. So in a multi-queue setup with GRO enabled and no XDP program attached, every NAPI instance looks at the peer's TX queue 0. If veth_xmit() stops peer TX queue 1 because the ptr_ring is full (NETDEV_TX_BUSY), nothing ever wakes it again: the poller draining queue 1 wakes queue 0 instead. veth implements no ndo_tx_timeout, so the netdev watchdog does not kick in either, and the queue stays stopped indefinitely. Derive the index from the position of the rq within priv->rq instead, which is correct regardless of whether XDP was ever enabled. Scripts to reproduce the stall are available at https://github.com/netoptimizer/veth-backpressure-performance-testing | ||||
| CVE-2026-80526 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2562: Validate values for volume writes tas2562_volume_control_put() does not do any validation of the control value written by userspace, it uses it to look up a value in a fixed size array which can easily be overflowed and then writes whatever value it gets back to the device. Add validation that we are loading a value we have in the array. | ||||
| CVE-2026-80627 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: mm: Fix out-of-bounds write in maar_res_walk() maar_res_walk() uses wi->num_cfg as the index into the fixed-size wi->cfg array, but checks whether the array is full only after it has filled the selected entry. If walk_system_ram_range() reports more than 16 memory ranges, the overflow call writes one struct maar_config past the end of the array before WARN_ON() prevents num_cfg from advancing. Move the full-array check before taking the array slot and return non-zero when the scratch array is full, so walk_system_ram_range() terminates the walk instead of invoking the callback for further ranges. | ||||
| CVE-2026-80525 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Refresh copier IPC payload before widget setup The ipc_config_data buffer for copier widgets is built once during ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached for reuse. For host copiers this buffer contains the copier_data with gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link DMA. On suspend/resume, both host and link DMA streams are released and re-allocated with potentially different stream tags. The underlying copier_data and dma_config_tlv structures are correctly updated by host_config and sdw_hda_dai_hw_params respectively. However, since the widget list (spcm->stream[].list) persists across suspend, sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare never runs again to rebuild ipc_config_data. The stale cached payload is then sent to firmware with boot-time DMA channel assignments, causing DMA channel conflicts that lead to firmware errors and crashes. Fix this by refreshing copier_data and dma_config_tlv portions of ipc_config_data in sof_ipc4_widget_setup right before the IPC message is sent. This ensures the payload always reflects the current DMA state regardless of whether ipc_prepare ran. For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily inflated to include the TLV size (matching the ipc_config_data layout) before copying, then restored, mirroring what sof_ipc4_prepare_copier_module does when first building the buffer. | ||||
| CVE-2026-80592 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: fail early if address range parameters are invalid The comment on top of `struct damon_region` clearly says that For any use case, @ar should be non-zero positive size. which is now verified in damon_verify_new_region() if the kernel is built with DAMON_DEBUG_SANITY. The WARN_ONCE() can be triggered if the mtier sample module is enabled before node{0,1}_{start,end}_addr have been properly initialized, which is obviously not good. ------------[ cut here ]------------ start 0 >= end 0 WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468 Call trace: damon_new_region+0xf4/0x118 (P) damon_set_regions+0xfc/0x3c0 damon_sample_mtier_build_ctx+0xe8/0x3a8 damon_sample_mtier_start+0x1c/0x90 damon_sample_mtier_enable_store+0x98/0xb0 param_attr_store+0xb4/0x128 module_attr_store+0x2c/0x50 sysfs_kf_write+0x58/0x90 kernfs_fop_write_iter+0x16c/0x238 vfs_write+0x2c0/0x370 ksys_write+0x74/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0xa8/0x118 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x54/0x370 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Note that the same issue can happen if detect_node_addresses is true, and node 0 or 1 is memoryless. Fix it together by checking the validity of parameters right before damon_new_region() and fail early if they're invalid. | ||||
| CVE-2026-80519 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: finish crypto callback cleanup before peer release Crypto completion callbacks hold both key-slot and peer references. The peer reference pins the netdev, and dropping the last peer reference can let netdev unregistration and module removal make progress. Do not release that peer reference before the callback has finished its own cleanup. If ovpn_crypto_key_slot_put runs after ovpn_peer_put, it can schedule an RCU callback backed by module text after ovpn_cleanup rcu_barrier has already run. The TX error path also freed the remaining skb after ovpn_peer_put, leaving callback cleanup outside the peer/netdev lifetime window. Release the key slot and free any remaining skb first, then drop the peer reference as the last callback action. | ||||
| CVE-2026-80610 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix potential divide-by-zero when num_vsi is zero For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so pf->caps.num_vsi is zero. This leads to a divide-by-zero in enetc4_default_rings_allocation() when distributing rings among PF and VFs. Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV instructions silently return zero rather than raising an exception, so the issue does not cause a visible crash. However, relying on this behavior is incorrect and poses a cross-platform compatibility risk. Add an explicit check for num_vsi == 0 and return early after the PF's rings have been configured. | ||||
| CVE-2026-80621 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability dwc_pcie_rasdes_debugfs_init() returns success when the controller has no RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which dereferences rasdes_info unconditionally. Return early when no RAS DES state was allocated. In that case no RAS DES mutex was initialized, so there is nothing to destroy. [mani: reworded subject] | ||||
| CVE-2026-80679 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential NULL pointer dereference dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator. | ||||
| CVE-2026-80704 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use proper context for logging The same as the rest of the code, get_ss_info_from_atombios() uses calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is initialized only later in calc_pll_max_vco_construct(). Therefore, any output using DC_LOG_SYNC() leads to a NULL pointer deference in get_ss_info_from_atombios(). According to Sashiko, the very same problem exists in dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too. To avoid accessing the NULL context, use clk_src->base.ctx->logger everywhere. That context in base is initialized earlier in dce110_clk_src_construct() and dce112_clk_src_construct(). Before get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions above are actually called. This is done by redefining DC_LOGGER to CTX->logger. Before: dce110_clk_src_construct() did: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM -> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx After: dce110_clk_src_construct() does: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses clk_src->base.ctx (cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0) | ||||
| CVE-2026-74740 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking rcu_access_pointer(a->goto_chain) and then calling tcf_action_goto_chain_exec(), which does a second, independent rcu_dereference_bh(a->goto_chain) read and immediately dereferences chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact replace path) can clear a->goto_chain between the two reads, so the second read returns NULL and tcf_action_goto_chain_exec() dereferences NULL. Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain in tcf_action_exec(), checking it once for NULL, and passing the resulting chain pointer into tcf_action_goto_chain_exec(). This turns the split check/use into a single check/use on one value. | ||||
| CVE-2026-80594 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc() by iterating through the extra descriptor data. However, it does not verify that the bLength of each descriptor is at least 2. A malicious device could provide a descriptor with bLength = 0, leading to an infinite loop in the driver. Add a check to ensure bLength is at least 2 before proceeding with parsing. | ||||
| CVE-2026-80607 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg Sashiko found that user can cause this WARN_ON_ONCE() easily with adding a kprobe event based on a raw address with BTF parameter. Since this is not an unexpected condition, remove the WARN_ON_ONCE(). | ||||
| CVE-2026-80636 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: revert ct extension genid infrastructure This infrastructure is not used anymore after moving ct timeout and helper to use datapath refcount to track object use. Revert commit c56716c69ce1 ("netfilter: extensions: introduce extension genid count") this patch disables all ct extensions (leading to NULL) for unconfirmed conntracks, when this is only targeted at ct helper and ct timeout. There is also codebase that dereferences the ct extension without checking for NULL which could lead to crash. | ||||
| CVE-2026-80658 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Fix null-ptr-deref in dw_dp_remove() Attempting to access driver data in the platform driver ->remove() callback may lead to a null pointer dereference since there is no guaranty that the component ->bind() callback invoking platform_set_drvdata() was executed. A common scenario is when Rockchip DRM driver didn't manage to run component_bind_all() because of an (unrelated) error causing early return from rockchip_drm_bind(). Drop the unnecessary call to platform_get_drvdata() and, instead, reference the target device structure via platform_device. | ||||