Export limit exceeded: 410591 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410591 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46125 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs. | ||||
| CVE-2026-46120 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: Use cached t->net in ip6erspan_changelink(). After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns ip6gre hash via link_net. ip6erspan_changelink() was not converted in that series and still uses dev_net(dev), which diverges from the device's creation netns after IFLA_NET_NS_FD migration. This re-inserts the tunnel into the wrong per-netns hash. The original netns keeps a stale entry. When that netns is later destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a slab-use-after-free reported by KASAN, followed by a kernel BUG at net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify(). Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). ip6gre_changelink() earlier in the same file already uses the cached t->net; only ip6erspan_changelink() has the wrong shape. | ||||
| CVE-2026-46116 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s hlist_del_rcu calls under syzkaller load on linux-6.12.y stable (reproduced on 6.12.47, also reachable via the same code path on torvalds/master and on the ipsec tree). Nine unique signatures cluster in the xfrm_state lifecycle, the load-bearing one being: BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline] BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline] BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435 Workqueue: netns cleanup_net Call Trace: __hlist_del / hlist_del_rcu __xfrm_state_delete xfrm_state_delete xfrm_state_flush xfrm_state_fini ops_exit_list cleanup_net The other observed signatures hit the same slab object from __xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB write variant of __xfrm_state_delete, all on the byseq/byspi hash chains. __xfrm_state_delete() guards its byseq and byspi unhashes with value-based predicates: if (x->km.seq) hlist_del_rcu(&x->byseq); if (x->id.spi) hlist_del_rcu(&x->byspi); while everywhere else in the file (e.g. state_cache, state_cache_input) the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets x->id.spi = newspi inside xfrm_state_lock and then immediately inserts into byspi, but a path that observes x->id.spi != 0 outside of xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently with whether x is actually on the list. The same holds for x->km.seq versus byseq, and the bydst/bysrc unhashes have no predicate at all, so a second __xfrm_state_delete() on the same object writes through LIST_POISON pprev. The defensive change here: - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst, bysrc, byseq and byspi so a second deletion is a no-op rather than a write through LIST_POISON pprev. The byseq/byspi nodes are already initialised in xfrm_state_alloc(). - Test hlist_unhashed() rather than the value predicate for byseq/byspi, so the unhash decision tracks list state rather than mutable scalar fields. Empirical verification: applied this patch on top of v6.12.47, rebuilt, and re-ran the same syzkaller harness for 1h16m on a previously-crashy configuration that produced ~100 hits each of slab-use-after-free Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in __xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at ~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo confirms the xfrm_state slab is actively allocated and freed during the run (~143 KiB resident), so the fuzzer is still exercising those code paths -- they just no longer crash. Reproduction: - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal - 9 unique signatures collected in ~9h, all within xfrm_state lifecycle | ||||
| CVE-2026-46113 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected GFN The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus the SPTE index. This assumption breaks for shadow paging if the guest page tables are modified between VM entries (similar to commit aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE", 2026-03-27). The flow is as follows: - a PDE is installed for a 2MB mapping, and a page in that area is accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages; the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because the guest's mapping is a huge page (and thus contiguous). - the PDE mapping is changed from outside the guest. - the guest accesses another page in the same 2MB area. KVM installs a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN (i.e. based on the new mapping, as changed in the previous step) but that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore the rmap entry cannot be found and removed when the kvm_mmu_page is zapped. - the memslot that covers the first 2MB mapping is deleted, and the kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove() only looks at the [sp->gfn, sp->gfn + 511] range established in step 1, and fails to find the rmap entry that was recorded by step 3. - any operation that causes an rmap walk for the same page accessed by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page. This includes dirty logging or MMU notifier invalidations (e.g., from MADV_DONTNEED). The underlying issue is that KVM's walking of shadow PTEs assumes that if a SPTE is present when KVM wants to install a non-leaf SPTE, then the existing kvm_mmu_page must be for the correct gfn. Because the only way for the gfn to be wrong is if KVM messed up and failed to zap a SPTE... which shouldn't happen, but *actually* only happens in response to a guest write. That bug dates back literally forever, as even the first version of KVM assumes that the GFN matches and walks into the "wrong" shadow page. However, that was only an imprecision until 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") came along. Fix it by checking for a target gfn mismatch and zapping the existing SPTE. That way the old SP and rmap entries are gone, KVM installs the rmap in the right location, and everyone is happy. | ||||
| CVE-2026-46111 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix potential UAF in create_big_sync Add hci_conn_valid() check in create_big_sync() to detect stale connections before proceeding with BIG creation. Handle the resulting -ECANCELED in create_big_complete() and re-validate the connection under hci_dev_lock() before dereferencing, matching the pattern used by create_le_conn_complete() and create_pa_complete(). Keep the hci_conn object alive across the async boundary by taking a reference via hci_conn_get() when queueing create_big_sync(), and dropping it in the completion callback. The refcount and the lock are complementary: the refcount keeps the object allocated, while hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on hdev->conn_hash, as required by hci_conn_del(). hci_conn_put() is called outside hci_dev_unlock() so the final put (which resolves to kfree() via bt_link_release) does not run under hdev->lock, though the release path would be safe either way. Without this, create_big_complete() would unconditionally dereference the conn pointer on error, causing a use-after-free via hci_connect_cfm() and hci_conn_del(). | ||||
| CVE-2026-46102 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: strparser: fix skb_head leak in strp_abort_strp() When the stream parser is aborted, for example after a message assembly timeout, it can still hold a reference to a partially assembled message in strp->skb_head. That skb is not released in strp_abort_strp(), which leaks the partially assembled message and can be triggered repeatedly to exhaust memory. Fix this by freeing strp->skb_head and resetting the parser state in the abort path. Leave strp_stop() unchanged so final cleanup still happens in strp_done() after the work and timer have been synchronized. | ||||
| CVE-2026-46090 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix peer runtime UAF during format-change stop loopback_check_format() may stop the capture side when playback starts with parameters that no longer match a running capture stream. Commit 826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved the peer lookup under cable->lock, but the actual snd_pcm_stop() still runs after dropping that lock. A concurrent close can clear the capture entry from cable->streams[] and detach or free its runtime while the playback trigger path still holds a stale peer substream pointer. Keep a per-cable count of in-flight peer stops before dropping cable->lock, and make free_cable() wait for those stops before detaching the runtime. This preserves the existing behavior while making the peer runtime lifetime explicit. | ||||
| CVE-2026-46078 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix the out-of-bounds nameoff handling for trailing dirents Currently we already have boundary-checks for nameoffs, but the trailing dirents are special since the namelens are calculated with strnlen() with unchecked nameoffs. If a crafted EROFS has a trailing dirent with nameoff >= maxsize, maxsize - nameoff can underflow, causing strnlen() to read past the directory block. nameoff0 should also be verified to be a multiple of `sizeof(struct erofs_dirent)` as well [1]. [1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com | ||||
| CVE-2026-46056 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix potential UAF in SSP passkey handlers hci_conn lookup and field access must be covered by hdev lock in hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise the connection can be freed concurrently. Extend the hci_dev_lock critical section to cover all conn usage in both handlers. Keep the existing keypress notification behavior unchanged by routing the early exits through a common unlock path. | ||||
| CVE-2026-46024 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply() If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both protocol and result, this is currently not treated as an error. In case of ac->negotiating == true and ac->protocol > 0, this leads to setting ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for ac->protocol != protocol returns false, and init_protocol() is not called. Subsequently, ac->ops->handle_reply() is called, which leads to a null pointer dereference, because ac->ops is still NULL. This patch changes the check for ac->protocol != protocol to !ac->protocol, as this also includes the case when the protocol was set to zero in the message. This causes the message to be treated as containing a bad auth protocol. | ||||
| CVE-2026-45991 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: udf: fix partition descriptor append bookkeeping Mounting a crafted UDF image with repeated partition descriptors can trigger a heap out-of-bounds write in part_descs_loc[]. handle_partition_descriptor() deduplicates entries by partition number, but appended slots never record partnum. As a result duplicate Partition Descriptors are appended repeatedly and num_part_descs keeps growing. Once the table is full, the growth path still sizes the allocation from partnum even though inserts are indexed by num_part_descs. If partnum is already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep the old capacity and the next append writes past the end of the table. Store partnum in the appended slot and size growth from the next append count so deduplication and capacity tracking follow the same model. | ||||
| CVE-2026-45984 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap inline data write path The inline data buffer head (dibh) is being released prematurely in gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report) 5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not available for this issue. The fix is based on analysis of the KASAN report and code review showing the buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] | ||||
| CVE-2026-45972 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF and double free in smb2_open_file() Zero out @err_iov and @err_buftype before retrying SMB2_open() to prevent an UAF bug if @data != NULL, otherwise a double free. | ||||
| CVE-2026-45970 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix UAF in rlb_arp_recv during bond up/down The ALB RX path may access rx_hashtbl concurrently with bond teardown. During rapid bond up/down cycles, rlb_deinitialize() frees rx_hashtbl while RX handlers are still running, leading to a null pointer dereference detected by KASAN. However, the root cause is that rlb_arp_recv() can still be accessed after setting recv_probe to NULL, which is actually a use-after-free (UAF) issue. That is the reason for using the referenced commit in the Fixes tag. [ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI [ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] [ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary) [ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022 [ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding] [ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00 [ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206 [ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e [ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8 [ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8 [ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119 [ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810 [ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000 [ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0 [ 214.310347] Call Trace: [ 214.313070] <IRQ> [ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding] [ 214.320975] bond_handle_frame+0x166/0xb60 [bonding] [ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] [ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710 [ 214.339199] ? __pfx_arp_process+0x10/0x10 [ 214.343775] ? sched_balance_find_src_group+0x98/0x630 [ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10 [ 214.356513] ? arp_rcv+0x307/0x690 [ 214.360311] ? __pfx_arp_rcv+0x10/0x10 [ 214.364499] ? __lock_acquire+0x58c/0xbd0 [ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0 [ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 214.380743] ? lock_acquire+0x10b/0x140 [ 214.385026] process_backlog+0x3f1/0x13a0 [ 214.389502] ? process_backlog+0x3aa/0x13a0 [ 214.394174] __napi_poll.constprop.0+0x9f/0x370 [ 214.399233] net_rx_action+0x8c1/0xe60 [ 214.403423] ? __pfx_net_rx_action+0x10/0x10 [ 214.408193] ? lock_acquire.part.0+0xbd/0x260 [ 214.413058] ? sched_clock_cpu+0x6c/0x540 [ 214.417540] ? mark_held_locks+0x40/0x70 [ 214.421920] handle_softirqs+0x1fd/0x860 [ 214.426302] ? __pfx_handle_softirqs+0x10/0x10 [ 214.431264] ? __neigh_event_send+0x2d6/0xf50 [ 214.436131] do_softirq+0xb1/0xf0 [ 214.439830] </IRQ> The issue is reproducible by repeatedly running ip link set bond0 up/down while receiving ARP messages, where rlb_arp_recv() can race with rlb_deinitialize() and dereference a freed rx_hashtbl entry. Fix this by setting recv_probe to NULL and then calling synchronize_net() to wait for any concurrent RX processing to finish. This ensures that no RX handler can access rx_hashtbl after it is freed in bond_alb_deinitialize(). | ||||
| CVE-2026-45945 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix race condition during PASID entry replacement The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing an active PASID entry (e.g., during domain replacement), the current implementation calculates a new entry on the stack and copies it to the table using a single structure assignment. struct pasid_entry *pte, new_pte; pte = intel_pasid_get_entry(dev, pasid); pasid_pte_config_first_level(iommu, &new_pte, ...); *pte = new_pte; Because the hardware may fetch the 512-bit PASID entry in multiple 128-bit chunks, updating the entire entry while it is active (Present bit set) risks a "torn" read. In this scenario, the IOMMU hardware could observe an inconsistent state — partially new data and partially old data — leading to unpredictable behavior or spurious faults. Fix this by removing the unsafe "replace" helpers and following the "clear-then-update" flow, which ensures the Present bit is cleared and the required invalidation handshake is completed before the new configuration is applied. | ||||
| CVE-2026-45942 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix e4b bitmap inconsistency reports A bitmap inconsistency issue was observed during stress tests under mixed huge-page workloads. Ext4 reported multiple e4b bitmap check failures like: ext4_mb_complex_scan_group:2508: group 350, 8179 free clusters as per group info. But got 8192 blocks Analysis and experimentation confirmed that the issue is caused by a race condition between page migration and bitmap modification. Although this timing window is extremely narrow, it is still hit in practice: folio_lock ext4_mb_load_buddy __migrate_folio check ref count folio_mc_copy __filemap_get_folio folio_try_get(folio) ...... mb_mark_used ext4_mb_unload_buddy __folio_migrate_mapping folio_ref_freeze folio_unlock The root cause of this issue is that the fast path of load_buddy only increments the folio's reference count, which is insufficient to prevent concurrent folio migration. We observed that the folio migration process acquires the folio lock. Therefore, we can determine whether to take the fast path in load_buddy by checking the lock status. If the folio is locked, we opt for the slow path (which acquires the lock) to close this concurrency window. Additionally, this change addresses the following issues: When the DOUBLE_CHECK macro is enabled to inspect bitmap-related issues, the following error may be triggered: corruption in group 324 at byte 784(6272): f in copy != ff on disk/prealloc Analysis reveals that this is a false positive. There is a specific race window where the bitmap and the group descriptor become momentarily inconsistent, leading to this error report: ext4_mb_load_buddy ext4_mb_load_buddy __filemap_get_folio(create|lock) folio_lock ext4_mb_init_cache folio_mark_uptodate __filemap_get_folio(no lock) ...... mb_mark_used mb_mark_used_double mb_cmp_bitmaps mb_set_bits(e4b->bd_bitmap) folio_unlock The original logic assumed that since mb_cmp_bitmaps is called when the bitmap is newly loaded from disk, the folio lock would be sufficient to prevent concurrent access. However, this overlooks a specific race condition: if another process attempts to load buddy and finds the folio is already in an uptodate state, it will immediately begin using it without holding folio lock. | ||||
| CVE-2026-45910 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race condition in QP timer handlers I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a race condition between retransmit_timer() and rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping to zero during timer handler execution. It seems this warning is harmless because rxe_qp_do_cleanup() will flush all pending timers and requests. Example of flow causing the issue: CPU0 CPU1 retransmit_timer() { spin_lock_irqsave rxe_destroy_qp() __rxe_cleanup() __rxe_put() // qp->ref_count decrease to 0 rxe_qp_do_cleanup() { if (qp->valid) { rxe_sched_task() { WARN_ON(rxe_read(task->qp) <= 0); } } spin_unlock_irqrestore } spin_lock_irqsave qp->valid = 0 spin_unlock_irqrestore } Ensure the QP's reference count is maintained and its validity is checked within the timer callbacks by adding calls to rxe_get(qp) and corresponding rxe_put(qp) after use. | ||||
| CVE-2026-45898 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix workqueue list corruption by removing work_list The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()") changed the work submission logic to unconditionally call queue_work() with the expectation that queue_work() would have no effect if work was already pending. The problem is that a free list of struct iwcm_work is used (for which struct work_struct is embedded), so each call to queue_work() is basically unique and therefore does indeed queue the work. This causes a problem in the work handler which walks the work_list until it's empty to process entries. This means that a single run of the work handler could process item N+1 and release it back to the free list while the actual workqueue entry is still queued. It could then get reused (INIT_WORK...) and lead to list corruption in the workqueue logic. Fix this by just removing the work_list. The workqueue already does this for us. This fixes the following error that was observed when stress testing with ucmatose on an Intel E830 in iWARP mode: [ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08) [ 151.466639] ------------[ cut here ]------------ [ 151.466986] kernel BUG at lib/list_debug.c:67! [ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary) [ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 151.469192] Workqueue: 0x0 (iw_cm_wq) [ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100 [ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 [ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046 [ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027 [ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600 [ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff [ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68 [ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000 [ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000 [ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0 [ 151.475895] PKRU: 55555554 [ 151.476118] Call Trace: [ 151.476331] <TASK> [ 151.476497] move_linked_works+0x49/0xa0 [ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0 [ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0 [ 151.477479] process_scheduled_works+0x1c8/0x410 [ 151.477823] worker_thread+0x125/0x260 [ 151.478108] ? __pfx_worker_thread+0x10/0x10 [ 151.478430] kthread+0xfe/0x240 [ 151.478671] ? __pfx_kthread+0x10/0x10 [ 151.478955] ? __pfx_kthread+0x10/0x10 [ 151.479240] ret_from_fork+0x208/0x270 [ 151.479523] ? __pfx_kthread+0x10/0x10 [ 151.479806] ret_from_fork_asm+0x1a/0x30 [ 151.480103] </TASK> | ||||
| CVE-2026-45861 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>. | ||||
| CVE-2026-45856 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr). | ||||