Export limit exceeded: 409360 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25376 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25376 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74616 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xdp: reject clones that overrun skb_shared_info tailroom xdpf_clone() clones broadcast copies into a single page and sets frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that page like a normal XDP frame and expects the usual skb_shared_info tailroom at the end of the buffer. The current check only rejects frames whose linear xdp_frame header, headroom, and packet data exceed PAGE_SIZE. A source frame backed by a larger allocation can still satisfy that check while extending into the clone's required shared-info area. When such a clone is converted back into an skb, build_skb_around() places skb_shared_info over live packet bytes and later writes can corrupt XDP return metadata. Reject clones unless their linear area fits inside SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already enforced by the XDP-to-skb conversion path. | ||||
| CVE-2026-74601 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Use current_context for safe per-CPU buffer swap The ring_buffer_swap_cpu() function currently checks the per-CPU committing counter to determine if a buffer is actively being written to before performing the swap. However, there exists a race window where this check can be bypassed: ring_buffer_lock_reserve cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a rb_reserve_next_event rb_start_commit // inc committing if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...} __rb_reserve_next rb_move_tail rb_end_commit(cpu_buffer); // dec committing => 0 /* interrupt hits here, successfully swaps! */ local_inc(&cpu_buffer->committing); ring_buffer_unlock_commit cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b rb_commit rb_end_commit RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)) // triggers warning The committing counter can temporarily drop to 0 during a single write operation (within rb_move_tail), creating a window where swap can succeed even though the write is still in progress. This leads to inconsistent buffer state and triggers the RB_WARN_ON in rb_commit(). Replace the committing counter check with current_context checks, which are set at the entry of ring_buffer_lock_reserve() and remain valid throughout the entire write operation, providing a reliable indicator of buffer busy state during swap. | ||||
| CVE-2026-74727 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: skip rehash for peers already removed from by_id ovpn_nl_peer_set_doit() resolves the target peer via ovpn_peer_get_by_id() before taking ovpn->lock. In the window between the lookup (which only takes a refcount) and the subsequent spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive expiry, or socket teardown can take ovpn->lock first, run ovpn_peer_remove() to unhash the peer from all four tables (by_id, by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which re-inserts the now-removed peer back into the rehashing tables. The same race affects the float path: ovpn_peer_endpoints_update() holds only a refcount and acquires ovpn->lock very late (after async AEAD decrypt and a netlink notification), then rehashes the peer in the by_transp_addr table. The resurrected peer becomes reachable again from the RX lookup (ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though userspace believes it is gone. Once the data-path refcount drops the peer is freed via call_rcu while the hash entries embedded in it remain linked, opening a UAF window. Bail out of the rehash when hash_entry_id is unhashed, mirroring the sentinel already used by ovpn_peer_remove() to detect the already-removed state. The check is safe under ovpn->lock, which serializes every mutation of hash_entry_id, and is a no-op for the add path because ovpn_peer_add_mp() inserts hash_entry_id before calling ovpn_peer_hash_vpn_ip(). | ||||
| CVE-2026-74690 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/ism: Fix UAF of sba and ieq during ism_dev_exit() A ism interrupt handler can be active in parallel with ism_dev_exit(), accessing freed data structures. No new interrupts will be generated after unregister_ieq(). Drain ongoing interrupt handlers by free_irq(), before freeing ism data structures. | ||||
| CVE-2026-74702 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 </TASK> RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward. | ||||
| CVE-2026-74597 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip6ip6_err() ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the quoted inner IPv6 packet, and then passes the clone to icmpv6_send(). The clone still carries the outer packet's inet6_skb_parm in skb->cb. If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao remains non-zero after skb_pull(). icmpv6_send() later calls mip6_addr_swap(), which uses that stale dsthao offset against the quoted inner packet. A malformed inner destination-options header can then make the HAO lookup and address swap run past the end of the quoted packet and corrupt skb_shared_info. Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the reply path does not reuse metadata left by the outer IPv6 stack. | ||||
| CVE-2026-74641 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: bound the hwdep mmap fault offset snd_us428ctls_vm_fault() turns the faulting page offset into a kernel address with no bound of any kind: offset = vmf->pgoff << PAGE_SHIFT; vaddr = (char *)(...)->us428ctls_sharedmem + offset; page = virt_to_page(vaddr); get_page(page); vmf->page = page; return 0; snd_us428ctls_mmap() checks only the length of the mapping, never the offset, and us428ctls_sharedmem is a single page from alloc_pages_exact(). For a character device file_mmap_size_max() returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page offset above zero resolves to a struct page outside the object, and the handler installs it into the caller's address space read-write; the vma is not marked read-only. The caller picks the page frame with a single mmap() argument and gets read-write access to a page of kernel memory it does not own; an offset that lands in an unpopulated vmemmap region oopses instead. A process that can open the hwdep node of an attached US-X2Y reaches this after loading the FPGA image through the same node; no capability check is involved. On 7.2.0-rc5 (arm64), mmap() with a large offset: Unable to handle kernel paging request at virtual address fffffdffc45d5ac8 pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] Call trace: snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] __do_fault __handle_mm_fault handle_mm_fault el0_da Reject any offset outside the shared region. The pcm hwdep handler in usx2yhwdeppcm.c computes its address the same way and needs the same bound. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74621 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix sk_buff leak when the header checks reject a packet tcf_ct_handle_fragments() runs its header sanity checks before handing anything to the defragmentation engine: if (family == NFPROTO_IPV4) err = tcf_ct_ipv4_is_fragment(skb, &frag); else err = tcf_ct_ipv6_is_fragment(skb, &frag); if (err || !frag) return err; tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM; tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of them frees or queues the skb, so on that path the caller still owns it. tcf_ct_act() however funnels every non-zero return into the ownership-transfer exit: err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag); if (err) goto out_frag; ... out_frag: if (err != -EINPROGRESS) tcf_action_inc_drop_qstats(&c->common); return TC_ACT_CONSUMED; TC_ACT_CONSUMED means the action took ownership of the skb, so no caller frees it - sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for that verdict. The skb is therefore orphaned: one sk_buff plus its data buffer is leaked per malformed packet, unbounded. Note the drop counter is already incremented for these errors, so the statistics claim a drop that never happens. Three different ownership states reach out_frag: today - the skb may be queued by the defrag engine (-EINPROGRESS), already freed by nf_ct_handle_fragments(), or still owned by us. Tell the caller which of those it is, and free the packet ourselves in the last case, which restores the TC_ACT_SHOT behaviour that predated the Fixes: commit. Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6 header with nexthdr = 0 (hop-by-hop) and nothing after it, on a clsact ingress chain with "action ct". kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet; with this patch it reports none. | ||||
| CVE-2026-74615 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: do not arm the ageing timer on a device that is down vxlan_changelink() arms vxlan->age_timer whenever the requested ageing interval differs from the configured one: if (conf.age_interval != vxlan->cfg.age_interval) mod_timer(&vxlan->age_timer, jiffies); There is no netif_running() test, so the timer is armed even on a device that was never brought up. The only synchronous cancel in the driver is the timer_delete_sync() in vxlan_stop(), which is .ndo_stop. netif_close_many() drops devices without IFF_UP before __dev_close_many() runs, so that cancel is skipped for such a device. vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a member of struct vxlan_dev, so free_netdev() releases the allocation the timer lives in while it is still queued on a timer_base. expire_timers() unlinks the entry before it loads timer->function, so the timer core writes through the freed object's list pointers: BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654 Write of size 8 at addr ffff00001adace68 by task true/192 __asan_store8+0x84/0xac __run_timers+0x208/0x654 run_timer_softirq+0x154/0x18c Allocated by task 189: alloc_netdev_mqs+0x64/0x720 rtnl_create_link+0x4ac/0x520 rtnl_newlink+0x758/0xd00 Freed by task 191: netdev_release+0x40/0x58 netdev_run_todo+0x4a4/0x8c0 rtnl_dellink+0x200/0x4e8 The rtnl operations involved are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Arming the timer on a down device never had an effect: vxlan_cleanup() returns early on !netif_running(), and vxlan_open() arms the timer for any non-zero interval once the device is brought up. Add the missing test. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74603 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix board ID over-read The EEPROM board ID is a fixed 13-byte field and is not guaranteed to contain a NUL terminator. Passing it directly to devlink_info_version_fixed_put() treats it as a C string and may read beyond the field. Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer before reporting the ID. Use a precision limit because the snprintf() output size alone does not bound the source string scan. | ||||
| CVE-2026-74676 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vt: add permission check for KDSKBMETA ioctl KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process to change meta mode on a non-controlling console without authorization. | ||||
| CVE-2026-74712 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix buffer length in create_direct_keys() We have seen in our CI the following KASAN message: BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core] Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764 [...] [<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core] [<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core] [<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa] [<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa] [...] The buggy address is located 4128 bytes inside of allocated 4384-byte region [0000000176794000, 0000000176795120) So in essence we read 16 bytes beyond 4384-byte allocation. create_direct_keys calculates the pointer and length for in and out buffers. The size calculation for in includes the entire structure size (out + in + mtt[]) but the pointer passed to cmd_exec points only to the 'in' field, skipping the 'out' field. This causes mlx5_copy_to_msg() to read beyond the allocated buffer by sizeof(out) bytes when copying command data. Properly calculate the input size to match the pointer and allocation size. | ||||
| CVE-2026-74661 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: fix netdev use-after-free in beacon worker mac802154_beacon_worker() reads local->beacon_req under RCU and derives the sub-interface from the request, but then drops the RCU read lock and continues to use both sdata and the embedded wpan_dev. mac802154_stop_beacons_locked() cancels only pending beacon work, clears local->beacon_req and frees the request. A beacon worker that is already running can therefore continue after interface teardown and dereference the freed netdev private area. The scan worker already pins the netdev before leaving RCU. Apply the same lifetime rule to the beacon worker: take a netdev reference while the request is still protected by RCU, and release it on all paths that continue after the reference is acquired. | ||||
| CVE-2026-74646 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke When an invoke is interrupted by a signal, wait_for_completion_interruptible() returns -ERESTARTSYS and fastrpc_internal_invoke() moves every buffer from fl->mmaps onto cctx->invoke_interrupted_mmaps. This list_del()/list_add_tail() walk runs without holding fl->lock, the lock that serialises fl->mmaps in fastrpc_req_mmap() and fastrpc_req_munmap() everywhere else. Take fl->lock around the move, matching every other fl->mmaps accessor. | ||||
| CVE-2026-74625 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: release template ct on non-IP path A bridge nftables ct zone set rule can attach a conntrack template to an skb before nf_ct_bridge_pre() sees it. For non-IPv4 and non-IPv6 EtherTypes, nf_ct_bridge_pre() currently overwrites skb->_nfct with IP_CT_UNTRACKED without releasing the existing template reference. That makes the per-cpu template, and any temporary templates allocated for concurrent use, unreachable and leaks memory until the host runs out of slab. Reset the skb conntrack state before marking the frame untracked so the existing template reference is dropped on the non-IP path. | ||||
| CVE-2026-74624 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: defer invalid log until after unlock TCP and SCTP conntrack paths can emit invalid-packet logs while ct->lock is still held. When invalid logging is routed to nfnetlink_log and conntrack export is enabled, the log path can re-enter conntrack netlink glue and dump the same conntrack again. Protocol attribute dumping may take ct->lock, so logging while holding that lock can deadlock. Defer the TCP invalid logs by storing only the minimal log context while ct->lock is held and emitting the log after unlocking. Also make the TCP timeout-lowering invalid path return whether a log is needed, then emit that log after unlocking. Do the same for the SCTP invalid state-transition log that can be reached while ct->lock is held. Add a lockdep assertion to nf_ct_l4proto_log_invalid() so future callers that log invalid conntracks while holding ct->lock are caught outside TCP and SCTP as well. | ||||
| CVE-2026-74607 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Serialize accesses to the owner and mirror list with separate lock Interaction between KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM and KVM_CAP_VM_COPY_ENC_CONTEXT_FROM can cause two separate issues: - in sev_migrate_from(), when the destination KVM is a mirror, the mirror entry is moved from the source's list to the owner's mirror_vms list, without holding the owner's lock unlike other writers of the owner's mirror list (sev_vm_copy_enc_context_from(), sev_vm_destroy()). A concurrent COPY or destroy can race with sev_migrate_from() and corrupt the list. - In sev_vm_destroy(), the *owner* is still active and could receive concurrently a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM that causes sev->enc_context_owner to change. In this case the incorrect VM receives kvm_put_kvm(). The second issue needs particular care because the owner could disappear altogether (even though the race window is impossibly small) between reading it and locking it. There is thus no way to perform the checks under the owner lock without putting struct kvm under SLAB_TYPESAFE_BY_RCU (which would allow kvm_get_kvm_safe() under RCU critical section). It is much simpler to just use a global lock, since the critical sections are so small and the new lock is always a leaf lock. | ||||
| CVE-2026-74606 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Fix use-after-free in eventfs_remove_rec() eventfs_remove_rec() recursively removes the child at the current loop position. After the recursive call returns, list_for_each_entry() advances by reading list.next from the removed child. If free_ei() drops the final reference, release_ei() reuses the list/rcu union to queue an SRCU callback. The child may be freed before that read. The eventfs_mutex serializes list updates, but it does not keep the removed child alive or prevent the SRCU callback from running. Use list_for_each_entry_safe() to save the next sibling before recursively removing the current child. | ||||
| CVE-2026-74595 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fscrypt: use the mount idmap for the owner check in fscrypt_ioctl_set_policy() fscrypt_ioctl_set_policy() calls inode_owner_or_capable() with &nop_mnt_idmap before allowing an encryption policy to be set, instead of the idmap of the mount the ioctl was issued on. fscrypt is used by filesystems that support idmapped mounts (e.g. ext4, f2fs), so on such a mount this compares the caller's fsuid against the unmapped on-disk owner rather than the mapped owner: the actual owner can be wrongly denied with -EACCES and an unrelated caller wrongly allowed. Use file_mnt_idmap(filp) instead. | ||||
| CVE-2026-74591 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mm/filemap: __filemap_add_folio() restore index before retrying In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is applied repeatedly: each application modifies xas.xa_index, rounding it down according to the split_order attempted at that stage: and if all goes as intended, it eventually (or immediately) converges on an xas_try_split() to the required folio_order, with xas.xa_index now the same as index: then xas_store() puts the new folio into the xarray there. But if a new node was needed, and GFP_NOWAIT allocation did not get one, the lock is dropped, xas_nomem() used to allocate, and sequence retried. If (that part of) the xarray is unchanged when the lock is reacquired, no problem. But what if the conflict was meanwhile resolved by another thread (perhaps even doing the same thing, inserting a folio at that same index)? Isn't there a danger of now putting our folio into the xarray at an intermediate rounded-down index? With !folio_contains() bug to follow, when CONFIG_DEBUG_VM=y is checking for that. Fix this with an xas_set_order() to restore the original xas.xa_index at the bottom of the loop, so the retry does a full re-evaluation after reacquiring the lock, and cannot reach xas_store() with the wrong index. Production was suffering from rare SIGILLs and SIGSEGVs, executable text found a page away from where it belonged, !folio_contains() bug hit when debug enabled: symptoms not seen since this patch went in. | ||||