Export limit exceeded: 410490 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 410490 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410490 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64034 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp() re-reads the same field from the same DMA buffer for test_bit() and pointer arithmetic. DMA-coherent memory is mapped uncacheable on x86 and is shared, unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes directly to host-visible memory. A H/W can modify the value between the check and the use, bypassing the bounds validation. Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a stack-local variable in mana_hwc_rx_event_handler(), and passing the validated value as a parameter to mana_hwc_handle_resp(). | ||||
| CVE-2026-64032 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix a possible use-after-free when removing a bridge port When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when per-VLAN multicast snooping is disabled. When global multicast snooping is enabled, the bridge iterates over all the bridge ports and enables the per-port multicast context on each port. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. After this commit, br_multicast_disable_port() only disables the per-port multicast context if per-VLAN multicast snooping is disabled. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1]. Fix by preventing the bridge from enabling / disabling the per-port multicast contexts when toggling global multicast snooping if per-VLAN multicast snooping is enabled. [1] ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0 [...] Call Trace: <IRQ> __debug_check_no_obj_freed (lib/debugobjects.c:1116) kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565) kobject_cleanup (lib/kobject.c:689) rcu_do_batch (kernel/rcu/tree.c:2617) rcu_core (kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) __irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735) irq_exit_rcu (kernel/softirq.c:752) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47)) </IRQ> | ||||
| CVE-2026-64030 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15. sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14), making index 15 out-of-bounds. A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response action frame with a PER_STA_PROFILE subelement where link_id = 15. The unsolicited-notification path (dialog_token = 0) is reachable any time EPCS is already enabled, without any prior client request. sdata->link[15] reads into the first word of sdata->activate_links_work (a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD), so the NULL check on the result does not catch the invalid access. The garbage pointer is then passed to ieee80211_sta_wmm_params(), which dereferences link->sdata and crashes the kernel. The same class of bug was fixed for ieee80211_ml_reconfiguration() by commit 162d331d833d ("wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration"). | ||||
| CVE-2026-64029 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Serialize UMP output teardown with event_input seq_ump_process_event() borrows client->out_rfile.output without synchronizing with the first-open and last-close transition in seq_ump_client_open() and seq_ump_client_close(). The last output unuse can therefore drop opened[STR_OUT] to zero and release the rawmidi file while an in-flight event_input callback is still inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream runtime exposed to teardown before the write path has taken its own buffer reference. Add a per-client rwlock for the event_input-visible output file. Publish a newly opened output file under the write side, and hold the read side from the output lookup through snd_rawmidi_kernel_write(). The last output close copies and clears the visible output file under the write side, then drops the lock and releases the saved rawmidi file. Use IRQ-safe rwlock guards because event_input can also be reached from atomic sequencer delivery. The buggy scenario involves two paths, with each column showing the order within that path: path A label: event_input path path B label: last unuse path 1. seq_ump_process_event() reads 1. seq_ump_client_close() client->out_rfile.output. drops opened[STR_OUT] to zero. 2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release() has not yet pinned runtime. closes the output file. 3. The writer continues using 3. close_substream() frees the borrowed substream. substream->runtime. This keeps the output substream and runtime alive for the full event_input write while keeping rawmidi release outside the rwlock. KASAN reproduced this as a slab-use-after-free in snd_rawmidi_kernel_write1(), with allocation through seq_ump_use()/snd_seq_port_connect() and free through seq_ump_unuse()/snd_seq_port_disconnect(). Validation reproduced this kernel report: KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400 RIP: 0033:0x7f5528af837f Read of size 8 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_rawmidi_kernel_write1+0x9d/0x400 (?:?) __asan_load8+0x82/0xb0 (?:?) update_stack_state+0x1ef/0x2d0 (?:?) snd_rawmidi_kernel_write+0x1a/0x20 (?:?) seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82) __snd_seq_deliver_single_event+0x8a/0xe0 (?:?) snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?) lock_acquire+0x14e/0x2e0 (?:?) find_held_lock+0x31/0x90 (?:?) snd_seq_port_use_ptr+0xa6/0xe0 (?:?) __kasan_check_write+0x18/0x20 (?:?) do_raw_read_unlock+0x32/0xa0 (?:?) _raw_read_unlock+0x26/0x50 (?:?) snd_seq_deliver_single_event+0x45c/0x4b0 (?:?) snd_seq_deliver_event+0x10d/0x1b0 (?:?) snd_seq_client_enqueue_event+0x192/0x240 (?:?) snd_seq_write+0x2cd/0x450 (?:?) apparmor_file_permission+0x20/0x30 (?:?) security_file_permission+0x51/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) __fget_files+0x12b/0x220 (?:?) lock_release+0xc8/0x2a0 (?:?) __rcu_read_unlock+0x74/0x2d0 (?:?) __fget_files+0x135/0x220 (?:?) ksys_write+0x15a/0x180 (?:?) rcu_is_watching+0x24/0x60 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-64027 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: shaper: rework the VALID marking (again) Recent commit changed the semantics from NOT_VALID to VALID. I didn't realize that the flags are not stored atomically with the entry in XArray. There's still a race of reader observing a VALID mark for a slot, getting interrupted, writer replacing the entry with a different one, reader continuing, fetching the entry which is now a different pointer than the pointer for which VALID was meant. The biggest consequence of this is that we may see a UAF since net_shaper_rollback() assumed that entries without VALID can be freed without observing RCU. Looks like the XArray marks are buying us nothing at this point. Let's convert the code to an explicit valid field. The smp_load_acquire() / smp_store_release() barriers are marginally cleaner. | ||||
| CVE-2026-64025 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bpf, skmsg: fix verdict sk_data_ready racing with ktls rx sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and defers to psock->saved_data_ready when a TLS RX context is present, avoiding a conflict with the TLS strparser's ownership of the receive queue (commit e91de6afa81c, "bpf: Fix running sk_skb program types with ktls"). sk_psock_verdict_data_ready() has no equivalent guard. When a socket is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready as rx_ctx->saved_data_ready. On data arrival: tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready -> saved_data_ready() = sk_psock_verdict_data_ready() -> tcp_read_skb() drains sk_receive_queue via __skb_unlink() without calling tcp_eat_skb(), so copied_seq is not advanced. tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned (potentially freed) skb. tls_decrypt_sg() subsequently walks that frag_list: use-after-free. Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context is present, call psock->saved_data_ready (sock_def_readable) to wake recv() waiters and return immediately, leaving the receive queue untouched. TLS retains sole ownership of the queue and decrypts the record normally through tls_sw_recvmsg(). | ||||
| CVE-2026-64017 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it. | ||||
| CVE-2026-64007 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload. Fix by re-deriving th from skb->data + protoff immediately after skb_ensure_writable() succeeds, so the subsequent checksum update targets the linear, writable header. | ||||
| CVE-2026-64002 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. | ||||
| CVE-2026-64000 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix potential OOB access in supervision frame handling Ensure the entire TLV header is linearized before access by adding sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this, a truncated frame could cause an out-of-bounds access. | ||||
| CVE-2026-63996 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: require exact CDB reply length Malicious SFP module could respond with rpl_len longer than what cmis_cdb_process_reply() expected, leading to OOB writes. Malicious HW is a bit theoretical but some modules may just be buggy and/or the reads may occasionally get corrupted, so let's protect the kernel. The existing check protects from short replies. We need to protect from long ones, too. All callers that pass a non-zero rpl_exp_len cast the reply payload to a fixed-layout struct and read fields at fixed offsets, with no version negotiation or short-reply handling: - cmis_cdb_validate_password() - cmis_cdb_module_features_get() - cmis_fw_update_fw_mng_features_get() so let's assume that responses longer than expected do not have to be handled gracefully here. Add a warning message to make the debug easier in case my understanding is wrong... Note that page_data->length (argument of kmalloc) comes from last arg to ethtool_cmis_page_init() which is rpl_exp_len. Note2 that AIs also like to point out overflows in args->req.payload itself (which is a fixed-size 120 B buffer, on the stack), but callers should be reading structs defined by the standard, so protecting from requests for more data than max seem like defensive programming. | ||||
| CVE-2026-63995 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: validate start_cmd_payload_size from module The CMIS firmware update code reads start_cmd_payload_size from the module's FW Management Features CDB reply and uses it directly as the byte count for memcpy. The destination buffer is 112 bytes (ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious module (or corrupted response) can cause a OOB write later on in cmis_fw_update_start_download(). Let's error out. If modules that expect longer LPL writes actually exist we should revisit. struct cmis_cdb_start_fw_download_pl's definition has to move, no change there. | ||||
| CVE-2026-63994 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed. | ||||
| CVE-2026-63993 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko. | ||||
| CVE-2026-63992 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine. | ||||
| CVE-2026-63987 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries). | ||||
| CVE-2026-63985 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc. | ||||
| CVE-2026-63984 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress() ipv6_rpl_srh_decompress() computes: outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3); hdrlen is __u8. For n >= 127 the result exceeds 255 and silently truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16): (128 * 16) >> 3 = 256, truncated to 0 as __u8 The caller in ipv6_rpl_srh_rcv() then places the compressed header at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8, but the decompressed region occupies buf[0..2055] (8-byte header plus 128 full addresses). The compressed header overlaps the decompressed data, and ipv6_rpl_srh_compress() writes into this overlap, corrupting the routing header of the forwarded packet. The existing guard at exthdrs.c:546 checks (n + 1) > 255, which prevents n+1 from overflowing unsigned char (the segments_left field), but does not prevent the computed hdrlen from overflowing __u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not fit. Tighten the bound to (n + 1) > 127. This caps n at 126, giving hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly past the decompressed region (buf[0..2039]). No overlap. 127 segments is well beyond any realistic RPL deployment. | ||||
| CVE-2026-63971 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix race between sctp_wait_for_connect and peeloff sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept. | ||||
| CVE-2026-63968 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_select_path() Found while auditing the same pattern Sashiko reported in rt6_fill_node() [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings) without waiting for RCU readers; first->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &first->fib6_siblings as its terminator. fib6_purge_rt() always WRITE_ONCE()s first->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev | ||||