Export limit exceeded: 25376 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25376 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64318 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold. | ||||
| CVE-2026-64446 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. | ||||
| CVE-2026-64447 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix double-free and use-after-free in error paths In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and then passed to ipu7_bus_initialize_device(), which stores it in adev->pdata. The ipu7_bus_release() function frees adev->pdata when the device's reference count drops to zero. Two error paths incorrectly call kfree(pdata) after the device teardown has already freed it: 1. When ipu7_mmu_init() fails: put_device() is called, which drops the reference count to zero and triggers ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is a double-free. 2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit() internally, which calls put_device() -> ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is again a double-free. Note that the kfree(pdata) when ipu7_bus_initialize_device() itself fails is correct, because in that case auxiliary_device_init() failed and the release function was never set up, so pdata must be freed manually. Additionally, the error code was not saved before calling put_device(), causing ERR_CAST() to dereference the already-freed adev pointer when constructing the return value. Fix this by saving the error from dev_err_probe() before put_device() and returning ERR_PTR() instead. Remove the redundant kfree(pdata) calls and fix the use-after-free in the return values of the two affected error paths. | ||||
| CVE-2026-64064 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_invalidate_folio() to clear dirty bit if all changes gone If a streaming write is made, this will leave the relevant modified folio in a not-uptodate, but dirty state with a netfs_folio struct hung off of folio->private indicating the dirty range. Subsequently truncating the file such that the dirty data in the folio is removed, but the first part of the folio theoretically remains will cause the netfs_folio struct to be discarded... but will leave the dirty flag set. If the folio is then read via mmap(), netfs_read_folio() will see that the page is dirty and jump to netfs_read_gaps() to fill in the missing bits. netfs_read_gaps(), however, expects there to be a netfs_folio struct present and can oops because truncate removed it. Fix this by calling folio_cancel_dirty() in netfs_invalidate_folio() in the event that all the dirty data in the folio is erased (as nfs does). Also add some tracepoints to log modifications to a dirty page. This can be reproduced with something like: dd if=/dev/zero of=/xfstest.test/foo bs=1M count=1 umount /xfstest.test mount /xfstest.test xfs_io -c "w 0xbbbf 0xf96c" \ -c "truncate 0xbbbf" \ -c "mmap -r 0xb000 0x11000" \ -c "mr 0xb000 0x11000" \ /xfstest.test/foo with fscaching disabled (otherwise streaming writes are suppressed) and a change to netfs_perform_write() to disallow streaming writes if the fd is open O_RDWR: if (//(file->f_mode & FMODE_READ) || <--- comment this out netfs_is_cache_enabled(ctx)) { It should be reproducible even without this change, but if prevents the above trivial xfs_io command from reproducing it. Note that the initial dd is important: the file must start out sufficiently large that the zero-point logic doesn't just clear the gaps because it knows there's nothing in the file to read yet. Unmounting and mounting is needed to clear the pagecache (there are other ways to do that that may also work). This was initially reproduced with the generic/522 xfstest on some patches that remove the FMODE_READ restriction. | ||||
| CVE-2026-64065 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call The multiple runs of generic/013 test-case is capable to reproduce a kernel BUG at mm/filemap.c:1504 with probability of 30%. while true; do sudo ./check generic/013 done [ 9849.452376] page: refcount:3 mapcount:0 mapping:00000000e58ff252 index:0x10781 pfn:0x1c322 [ 9849.452412] memcg:ffff8881a1915800 [ 9849.452417] aops:ceph_aops ino:1000058db9e dentry name(?):"f9XXXXXX" [ 9849.452432] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 9849.452441] raw: 0017ffffc0000000 0000000000000000 dead000000000122 ffff88816110d248 [ 9849.452445] raw: 0000000000010781 0000000000000000 00000003ffffffff ffff8881a1915800 [ 9849.452447] page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) [ 9849.452474] ------------[ cut here ]------------ [ 9849.452476] kernel BUG at mm/filemap.c:1504! [ 9849.478635] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 9849.481772] CPU: 2 UID: 0 PID: 84223 Comm: fsstress Not tainted 7.0.0-rc1+ #18 PREEMPT(full) [ 9849.482881] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-9.fc43 06/1 0/2025 [ 9849.484539] RIP: 0010:folio_unlock+0x85/0xa0 [ 9849.485076] Code: 89 df 31 f6 e8 1c f3 ff ff 48 8b 5d f8 c9 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 48 c7 c6 80 6c d9 a7 48 89 df e8 4b b3 10 00 <0f> 0b 48 89 df e8 21 e6 2c 00 eb 9d 0f 1f 40 00 66 66 2e 0f 1f 84 [ 9849.493818] RSP: 0018:ffff8881bb8076b0 EFLAGS: 00010246 [ 9849.495740] RAX: 0000000000000000 RBX: ffffea00070c8980 RCX: 0000000000000000 [ 9849.498678] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 9849.500559] RBP: ffff8881bb8076b8 R08: 0000000000000000 R09: 0000000000000000 [ 9849.501097] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000010782000 [ 9849.502108] R13: ffff8881935de738 R14: ffff88816110d010 R15: 0000000000001000 [ 9849.502516] FS: 00007e36cbe94740(0000) GS:ffff88824a899000(0000) knlGS:0000000000000000 [ 9849.502996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9849.503810] CR2: 000000c0002b0000 CR3: 000000011bbf6004 CR4: 0000000000772ef0 [ 9849.504459] PKRU: 55555554 [ 9849.504626] Call Trace: [ 9849.505242] <TASK> [ 9849.505379] netfs_write_begin+0x7c8/0x10a0 [ 9849.505877] ? __kasan_check_read+0x11/0x20 [ 9849.506384] ? __pfx_netfs_write_begin+0x10/0x10 [ 9849.507178] ceph_write_begin+0x8c/0x1c0 [ 9849.507934] generic_perform_write+0x391/0x8f0 [ 9849.508503] ? __pfx_generic_perform_write+0x10/0x10 [ 9849.509062] ? file_update_time_flags+0x19a/0x4b0 [ 9849.509581] ? ceph_get_caps+0x63/0xf0 [ 9849.510259] ? ceph_get_caps+0x63/0xf0 [ 9849.510530] ceph_write_iter+0xe79/0x1ae0 [ 9849.511282] ? __pfx_ceph_write_iter+0x10/0x10 [ 9849.511839] ? lock_acquire+0x1ad/0x310 [ 9849.512334] ? ksys_write+0xf9/0x230 [ 9849.512582] ? lock_is_held_type+0xaa/0x140 [ 9849.513128] vfs_write+0x512/0x1110 [ 9849.513634] ? __fget_files+0x33/0x350 [ 9849.513893] ? __pfx_vfs_write+0x10/0x10 [ 9849.514143] ? mutex_lock_nested+0x1b/0x30 [ 9849.514394] ksys_write+0xf9/0x230 [ 9849.514621] ? __pfx_ksys_write+0x10/0x10 [ 9849.514887] ? do_syscall_64+0x25e/0x1520 [ 9849.515122] ? __kasan_check_read+0x11/0x20 [ 9849.515366] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.515655] __x64_sys_write+0x72/0xd0 [ 9849.515885] ? trace_hardirqs_on+0x24/0x1c0 [ 9849.516130] x64_sys_call+0x22f/0x2390 [ 9849.516341] do_syscall_64+0x12b/0x1520 [ 9849.516545] ? do_syscall_64+0x27c/0x1520 [ 9849.516783] ? do_syscall_64+0x27c/0x1520 [ 9849.517003] ? lock_release+0x318/0x480 [ 9849.517220] ? __x64_sys_io_getevents+0x143/0x2d0 [ 9849.517479] ? percpu_ref_put_many.constprop.0+0x8f/0x210 [ 9849.517779] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 9849.518073] ? do_syscall_64+0x25e/0x1520 [ 9849.518291] ? __kasan_check_read+0x11/0x20 [ 9849.518519] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.518799] ? do_syscall_64+0x27c/0x1520 [ 9 ---truncated--- | ||||
| CVE-2026-64066 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_to_pagecache() to pause on subreq failure Fix netfs_read_to_pagecache() so that it pauses the generation of new subrequests if an already-issued subrequest fails. | ||||
| CVE-2026-64449 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: bound slave read/write to the kern_buf size The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy 'count' bytes into/out of the fixed-size kern_buf (size_buf == PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without bounding *ppos + count against size_buf. vme_user_write()/vme_user_read() only clamp count to the VME window size (image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the user-supplied slave.size -- validated against the VME address space (up to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window exceeds 128 KiB, a write()/read() copies past the kern_buf allocation. Clamp count against size_buf in both helpers, with an early return when *ppos is already at/after the buffer end. *ppos is >= 0 here (the caller rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors the existing clamp in the MASTER-path helpers resource_to_user() / resource_from_user(), and matches the read()/write() convention of a short transfer at end-of-buffer. Found by static analysis (CodeQL taint tracking + CBMC bounded model checking) and confirmed dynamically under KASAN with the vme_fake bridge: BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80 Write of size 262144 at addr ffff888004100000 by task trigger/68 _copy_from_user+0x2d/0x80 vme_user_write+0x13e/0x240 [vme_user] vfs_write+0x1b8/0x7a0 ksys_write+0xb8/0x150 | ||||
| CVE-2026-64069 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix cancellation of a DIO and single read subrequests When the preparation of a new subrequest for a read fails, if the subrequest has already been added to the stream->subrequests list, it can't simply be put and abandoned as the collector may see it. Also, if it hasn't been queued yet, it has two outstanding refs that both need to be put. Both DIO read and single-read dispatch fail at this; further, both differ in the order they do things to the way buffered read works. Fix cancellation of both DIO-read and single-read subrequests that failed preparation by the following steps: (1) Harmonise all three reads (buffered, dio, single) to queue the subreq before prepping it. (2) Make all three call netfs_queue_read() to do the queuing. (3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't know the length of the subreq at this point. (4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq and then call netfs_read_subreq_terminated() to deal with it. This will pass responsibility off to the collector for dealing with it. | ||||
| CVE-2026-58641 | 3 Apple, Linux, Microsoft | 5 Macos, Linux Kernel, .net and 2 more | 2026-09-03 | 7.8 High |
| Integer overflow or wraparound in .NET allows an unauthorized attacker to elevate privileges locally. | ||||
| CVE-2026-76642 | 2 Kernel, Linux | 2 Util-linux, Util-linux | 2026-09-03 | 7.8 High |
| util-linux versions through 2.41.5 and 2.42.2 fail to check mount helper exit status before running post-mount hooks, allowing unprivileged users to execute privileged operations on pre-existing filesystems. Attackers can exploit X-mount.idmap or X-mount.owner hooks to clone filesystems with inherited suid bits or modify target inode permissions after a helper fails, achieving privilege escalation. | ||||
| CVE-2026-64451 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix NULL pointer dereference in func_set_flag() func_set_flag() dereferences tr->current_trace_flags before verifying that the current tracer is actually the function tracer. When the active tracer has been switched away from "function" (e.g., to "wakeup_rt"), tr->current_trace_flags can be NULL, leading to a NULL pointer dereference and kernel crash. The call chain that triggers this is: trace_options_write() -> __set_tracer_option() -> trace->set_flag() /* func_set_flag */ In func_set_flag(), the first operation is: if (!!set == !!(tr->current_trace_flags->val & bit)) This dereferences tr->current_trace_flags unconditionally. The safety check that guards against a non-function tracer: if (tr->current_trace != &function_trace) return 0; is placed *after* the dereference, which is too late. This was observed with the following crash dump: BUG: unable to handle page fault at 0000000000000000 RIP: func_set_flag+0xd Call Trace: __set_tracer_option+0x27 trace_options_write+0x75 vfs_write+0x12a ksys_write+0x66 do_syscall_64+0x5b RIP: ffffffff914c973d RSP: ff67ec88b01dfdf0 RFLAGS: 00010202 RAX: 0000000000000000 RBX: ff3a826e80354580 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff93918080 The disassembly confirms the fault: func_set_flag+0: mov 0x1f08(%rdi), %rax ; RAX = tr->current_trace_flags = NULL func_set_flag+13: mov (%rax), %eax ; page fault: dereference NULL At the time of the crash: tr->current_trace_flags = 0x0 (NULL) tr->current_trace = wakeup_rt_tracer (not function_trace) The scenario is that a process opens a function tracer option file (such as "func_stack_trace"), then the current tracer is switched to another tracer (e.g., "wakeup_rt"), which sets current_trace_flags to NULL. When the process subsequently writes to the option file, func_set_flag() is invoked and crashes on the NULL dereference. Fix this by moving the current_trace check before the current_trace_flags dereference, so that func_set_flag() returns early when the function tracer is not active. | ||||
| CVE-2026-64070 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/hv-gpci: fix preempt count leak in sysfs show paths Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb) (which calls preempt_disable()) but only call the matching put_cpu_var() on the error path under the 'out:' label. Every successful read leaks one preempt_disable(): processor_bus_topology_show() processor_config_show() affinity_domain_via_virtual_processor_show() affinity_domain_via_domain_show() (affinity_domain_via_partition_show() was already correct.) On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and eventually return to userspace with preemption still disabled. The next user-mode page fault then hits faulthandler_disabled() == 1, gets forced to SIGSEGV, and the resulting coredump trips 'BUG: scheduling while atomic' in call_usermodehelper_exec -> wait_for_completion_state -> schedule: BUG: scheduling while atomic: <task>/<pid>/0x00000004 ... __schedule_bug+0x6c/0x90 __schedule+0x58c/0x13a0 schedule+0x48/0x1a0 schedule_timeout+0x104/0x170 wait_for_completion_state+0x16c/0x330 call_usermodehelper_exec+0x254/0x2d0 vfs_coredump+0x1050/0x2590 get_signal+0xb9c/0xc80 do_notify_resume+0xf8/0x470 Add an out_success label that calls put_cpu_var() before returning the byte count, mirroring affinity_domain_via_partition_show(). | ||||
| CVE-2026-64071 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix use-after-free in nvme_free_host_mem() nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous() but never clears the pointer afterward. This leads to a use-after-free if nvme_free_host_mem() is called twice in the same error path. This can happen during nvme_probe() when nvme_setup_host_mem() succeeds in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem() fails with an I/O error: nvme_setup_host_mem() nvme_alloc_host_mem_single() -> sets dev->hmb_sgt nvme_set_host_mem() -> fails with -EIO nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it return error nvme_probe() error path: nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free The second call dereferences the freed sgt, causing a NULL pointer dereference in iommu_dma_free_noncontiguous() when it accesses sgt->sgl->dma_address (the backing memory has been freed and zeroed). This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC Envoy Express behind a Dell WD22TB4 dock) where the device intermittently returns I/O errors during HMB setup due to PCIe link instability. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80 Call Trace: <TASK> dma_free_noncontiguous+0x3b/0x130 nvme_free_host_mem+0x30/0xf0 [nvme] nvme_probe.cold+0xcc/0x275 [nvme] local_pci_probe+0x43/0xa0 pci_device_probe+0xeea/0x290 really_probe+0xf9/0x3b0 __driver_probe_device+0x8b/0x170 driver_probe_device+0x24/0xd0 __driver_attach_async_helper+0x6b/0x110 async_run_entry_fn+0x37/0x170 process_one_work+0x1ac/0x3d0 worker_thread+0x1b8/0x360 kthread+0xf7/0x130 ret_from_fork+0x2d8/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by setting dev->hmb_sgt to NULL after freeing it, so the second call takes the multi-descriptor path which safely handles the already-cleaned-up state. | ||||
| CVE-2026-64072 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix bio leak on mapping failure The local bio is always NULL, so we'd leak the bio if the integrity mapping failed. Just get it directly from the request. | ||||
| CVE-2026-64074 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap statmount_mnt_idmap() writes one mapping with seq_printf() and then manually advances seq->count to include the NUL separator. If seq_printf() overflows, seq_set_overflow() sets seq->count to seq->size. The manual seq->count++ changes this to seq->size + 1. seq_has_overflowed() then no longer detects the overflow. The corrupted count returns to statmount_string(), which later executes: seq->buf[seq->count++] = '\0'; This causes a 1-byte NULL out-of-bounds write on the dynamically allocated seq buffer. Fix this by checking for overflow immediately after seq_printf(). | ||||
| CVE-2026-64075 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Fix unregister_fprobe() to wait for RCU grace period Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer") changed fprobe to register struct fprobe to an rcu-hlist, but it forgot to wait for RCU GP. Thus there can be use-after-free if the fprobe is released right after unregistering. This can be happened on fprobe event and sample module code. To fix this issue, add synchronize_rcu() in unregister_fprobe(). Note that BPF is OK because fprobe is used as a part of bpf_kprobe_multi_link. This unregisters its fprobe in bpf_kprobe_multi_link_release() and it is deallocated via bpf_kprobe_multi_link_dealloc(), which is invoked from bpf_link_defer_dealloc_rcu_gp() RCU callback. For BPF, this also introduced unregister_fprobe_async() which does NOT wait for RCU grace priod. | ||||
| CVE-2026-64453 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: fix disconnect UAF in client teardown usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each auxiliary device. auxiliary_device_uninit() drops the device reference, and for an unbound child that can run usbio_auxdev_release() and free the containing struct usbio_client. list_for_each_entry_reverse() advances after the loop body by reading client->link.prev. If the current client is freed by auxiliary_device_uninit(), the iterator dereferences freed memory. Use list_for_each_entry_safe_reverse() so the previous client is cached before the body can drop the final reference. This preserves reverse teardown order while keeping the next iterator cursor independent of the current client's lifetime. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? usbio_disconnect+0x12e/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? usbio_disconnect+0x12e/0x150 kasan_report+0xe0/0x110 ? usbio_disconnect+0x12e/0x150 usbio_disconnect+0x12e/0x150 usb_unbind_interface+0xf3/0x400 really_probe+0x316/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xea/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? usb_enable_lpm+0x3c/0x260 usb_set_configuration+0xb64/0xf20 usb_generic_driver_probe+0x5f/0x90 usb_probe_device+0x71/0x1b0 really_probe+0x46b/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? add_device_randomness+0xb7/0xf0 usb_new_device+0x492/0x870 hub_event+0x1b10/0x29c0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x187/0x300 ? process_one_work+0x475/0xb90 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2026-64078 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: add and use xtables_unregister_table_exit Previous change added xtables_unregister_table_pre_exit to detach the table from the packetpath and to unlink it from the active table list. In case of rmmod, userspace that is doing set/getsockopt for this table will not be able to re-instantiate the table: 1. The larval table has been removed already 2. existing instantiated table is no longer on the xt pernet table list. This adds the second stage helper: unlink the table from the dying list, free the hook ops (if any) and do the audit notification. It replaces xt_unregister_table(). | ||||
| CVE-2026-80756 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: do not cancel a policy conversion that never started sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes() fails, and that helper dereferences the outgoing policy to cancel its sidtab conversion. On the first policy load there is no outgoing policy: security_load_policy() returns early for that case, before it converts anything, and state->policy is still NULL. A first load that fails while building the selinuxfs tree therefore takes a NULL dereference in selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load. Skip the cancel when there is no old policy, mirroring the check security_load_policy() already makes before it converts. | ||||
| CVE-2026-80757 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: reject a class permission count below its inherited common security_get_permissions() maps an inherited common's permissions into an array sized by the class's own permissions.nprim, but class_read() takes that nprim verbatim from the policy image and never checks that it covers the common. A class that inherits a common of N permissions while declaring a smaller nprim is accepted, and on load the common's permissions are written past the class-sized array -- an out-of-bounds heap write. Reject a class whose permission count is below its inherited common's. Well-formed policies, where the class count already includes the inherited permissions, are unaffected. | ||||