Export limit exceeded: 11271 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11271 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43232 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets When the FarSync T-series card is being detached, the fst_card_info is deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task may still be running or pending, leading to use-after-free bugs when the already freed fst_card_info is accessed in fst_process_tx_work_q() or fst_process_int_work_q(). A typical race condition is depicted below: CPU 0 (cleanup) | CPU 1 (tasklet) | fst_start_xmit() fst_remove_one() | tasklet_schedule() unregister_hdlc_device()| | fst_process_tx_work_q() //handler kfree(card) //free | do_bottom_half_tx() | card-> //use The following KASAN trace was captured: ================================================================== BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00 Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcb/0x5d0 ? do_bottom_half_tx+0xb88/0xd00 kasan_report+0xb8/0xf0 ? do_bottom_half_tx+0xb88/0xd00 do_bottom_half_tx+0xb88/0xd00 ? _raw_spin_lock_irqsave+0x85/0xe0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx___hrtimer_run_queues+0x10/0x10 fst_process_tx_work_q+0x67/0x90 tasklet_action_common+0x1fa/0x720 ? hrtimer_interrupt+0x31f/0x780 handle_softirqs+0x176/0x530 __irq_exit_rcu+0xab/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ... Allocated by task 41 on cpu 3 at 72.330843s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 __kasan_kmalloc+0x7f/0x90 fst_add_one+0x1a5/0x1cd0 local_pci_probe+0xdd/0x190 pci_device_probe+0x341/0x480 really_probe+0x1c6/0x6a0 __driver_probe_device+0x248/0x310 driver_probe_device+0x48/0x210 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x101/0x190 __device_attach+0x198/0x3a0 device_initial_probe+0x78/0xa0 pci_bus_add_device+0x81/0xc0 pci_bus_add_devices+0x7e/0x190 enable_slot+0x9b9/0x1130 acpiphp_check_bridge.part.0+0x2e1/0x460 acpiphp_hotplug_notify+0x36c/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... Freed by task 41 on cpu 1 at 75.138639s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x135/0x410 fst_remove_one+0x2ca/0x540 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0x364/0x530 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device+0xd/0x20 disable_slot+0x116/0x260 acpiphp_disable_and_eject_slot+0x4b/0x190 acpiphp_hotplug_notify+0x230/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... The buggy address belongs to the object at ffff88800aad1000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 28 bytes inside of freed 1024-byte region The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x100000000000040(head|node=0|zone=1) page_type: f5(slab) raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88800aad1000: fa fb ---truncated--- | ||||
| CVE-2026-43236 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying the atmel_hlcdc_plane state structure without properly duplicating the drm_plane_state. In particular, state->commit remained set to the old state commit, which can lead to a use-after-free in the next drm_atomic_commit() call. Fix this by calling __drm_atomic_helper_duplicate_plane_state(), which correctly clones the base drm_plane_state (including the ->commit pointer). It has been seen when closing and re-opening the device node while another DRM client (e.g. fbdev) is still attached: ============================================================================= BUG kmalloc-64 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- 0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0 pid=29 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_framebuffer_remove+0x4cc/0x5a8 drm_mode_rmfb_work_fn+0x6c/0x80 process_one_work+0x12c/0x2cc worker_thread+0x2a8/0x400 kthread+0xc0/0xdc ret_from_fork+0x14/0x28 Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0 pid=169 drm_atomic_helper_commit_hw_done+0x100/0x150 drm_atomic_helper_commit_tail+0x64/0x8c commit_tail+0x168/0x18c drm_atomic_helper_commit+0x138/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54 Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0 flags=0x200(workingset|zone=0) Object 0xc611b340 @offset=832 fp=0xc611b7c0 | ||||
| CVE-2026-6722 | 2 Php, Php Group | 2 Php, Php | 2026-05-12 | 9.8 Critical |
| In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before 8.4.21, and 8.5.* before 8.5.6, the SOAP extension's object deduplication mechanism stores pointers to PHP objects in a global map without incrementing their reference counts. When an apache:Map node contains duplicate keys, processing the second entry overwrites the first in the temporary result map, freeing the original PHP object while its stale pointer remains in the map. A subsequent href reference to the freed node can copy the dangling pointer into the result. As PHP string allocations can reclaim the freed memory region, an attacker with control over the SOAP request body can exploit this use-after-free to achieve remote code execution. | ||||
| CVE-2026-7261 | 2 Php, Php Group | 2 Php, Php | 2026-05-12 | 9.8 Critical |
| In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before 8.4.21, and 8.5.* before 8.5.6, when SoapServer is configured with SOAP_PERSISTENCE_SESSION, the handler object is persisted across requests via session storage. However, in the case SOAP requests results in an error, the persistance is handled incorrectly, resulting in freeing the object while keeping a pointer to it, which may lead to use-after-free. This may lead to memory corruption, information disclosure, or process crashes, with confidentiality, integrity, and availability impact on the vulnerable system. | ||||
| CVE-2026-6654 | 1 Mozilla | 1 Thin-vec | 2026-05-12 | 5.1 Medium |
| Double-Free / Use-After-Free (UAF) in the `IntoIter::drop` and `ThinVec::clear` functions in the thin_vec crate. A panic in `ptr::drop_in_place` skips setting the length to zero. | ||||
| CVE-2026-28387 | 1 Openssl | 1 Openssl | 2026-05-12 | 8.1 High |
| Issue summary: An uncommon configuration of clients performing DANE TLSA-based server authentication, when paired with uncommon server DANE TLSA records, may result in a use-after-free and/or double-free on the client side. Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, the issue only affects clients that make use of TLSA records with both the PKIX-TA(0/PKIX-EE(1) certificate usages and the DANE-TA(2) certificate usage. By far the most common deployment of DANE is in SMTP MTAs for which RFC7672 recommends that clients treat as 'unusable' any TLSA records that have the PKIX certificate usages. These SMTP (or other similar) clients are not vulnerable to this issue. Conversely, any clients that support only the PKIX usages, and ignore the DANE-TA(2) usage are also not vulnerable. The client would also need to be communicating with a server that publishes a TLSA RRset with both types of TLSA records. No FIPS modules are affected by this issue, the problem code is outside the FIPS module boundary. | ||||
| CVE-2025-43368 | 1 Apple | 5 Ios, Ipados, Iphone Os and 2 more | 2026-05-12 | 4.3 Medium |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 26, iOS 26 and iPadOS 26, macOS Tahoe 26. Processing maliciously crafted web content may lead to an unexpected Safari crash. | ||||
| CVE-2025-39824 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix UAF via HID_CLAIMED_INPUT validation After hid_hw_start() is called hidinput_connect() will eventually be called to set up the device with the input layer since the HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect() all input and output reports are processed and corresponding hid_inputs are allocated and configured via hidinput_configure_usages(). This process involves slot tagging report fields and configuring usages by setting relevant bits in the capability bitmaps. However it is possible that the capability bitmaps are not set at all leading to the subsequent hidinput_has_been_populated() check to fail leading to the freeing of the hid_input and the underlying input device. This becomes problematic because a malicious HID device like a ASUS ROG N-Key keyboard can trigger the above scenario via a specially crafted descriptor which then leads to a user-after-free when the name of the freed input device is written to later on after hid_hw_start(). Below, report 93 intentionally utilises the HID_UP_UNDEFINED Usage Page which is skipped during usage configuration, leading to the frees. 0x05, 0x0D, // Usage Page (Digitizer) 0x09, 0x05, // Usage (Touch Pad) 0xA1, 0x01, // Collection (Application) 0x85, 0x0D, // Report ID (13) 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) 0x09, 0xC5, // Usage (0xC5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs) 0x85, 0x5D, // Report ID (93) 0x06, 0x00, 0x00, // Usage Page (Undefined) 0x09, 0x01, // Usage (0x01) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x1B, // Report Count (27) 0x81, 0x02, // Input (Data,Var,Abs) 0xC0, // End Collection Below is the KASAN splat after triggering the UAF: [ 21.672709] ================================================================== [ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80 [ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54 [ 21.673700] [ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary) [ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 21.673700] Call Trace: [ 21.673700] <TASK> [ 21.673700] dump_stack_lvl+0x5f/0x80 [ 21.673700] print_report+0xd1/0x660 [ 21.673700] kasan_report+0xe5/0x120 [ 21.673700] __asan_report_store8_noabort+0x1b/0x30 [ 21.673700] asus_probe+0xeeb/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Allocated by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_alloc_info+0x3b/0x50 [ 21.673700] __kasan_kmalloc+0x9c/0xa0 [ 21.673700] __kmalloc_cache_noprof+0x139/0x340 [ 21.673700] input_allocate_device+0x44/0x370 [ 21.673700] hidinput_connect+0xcb6/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Freed by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_free_info+0x3f/0x60 [ 21.673700] __kasan_slab_free+0x3c/0x50 [ 21.673700] kfre ---truncated--- | ||||
| CVE-2025-39689 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Also allocate and copy hash for reading of filter files Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds the pointer to the global tracer hash to its iterator. Unlike the writer that allocates a copy of the hash, the reader keeps the pointer to the filter hashes. This is problematic because this pointer is static across function calls that release the locks that can update the global tracer hashes. This can cause UAF and similar bugs. Allocate and copy the hash for reading the filter files like it is done for the writers. This not only fixes UAF bugs, but also makes the code a bit simpler as it doesn't have to differentiate when to free the iterator's hash between writers and readers. | ||||
| CVE-2025-38699 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Double-free fix When the bfad_im_probe() function fails during initialization, the memory pointed to by bfad->im is freed without setting bfad->im to NULL. Subsequently, during driver uninstallation, when the state machine enters the bfad_sm_stopping state and calls the bfad_im_probe_undo() function, it attempts to free the memory pointed to by bfad->im again, thereby triggering a double-free vulnerability. Set bfad->im to NULL if probing fails. | ||||
| CVE-2025-38236 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't leave consecutive consumed OOB skbs. Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_ ---truncated--- | ||||
| CVE-2025-38212 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned(). | ||||
| CVE-2025-31257 | 2 Apple, Redhat | 13 Ipados, Iphone Os, Macos and 10 more | 2026-05-12 | 4.7 Medium |
| This issue was addressed with improved memory handling. This issue is fixed in Safari 18.5, iOS 18.5 and iPadOS 18.5, macOS Sequoia 15.5, tvOS 18.5, visionOS 2.5, watchOS 11.5. Processing maliciously crafted web content may lead to an unexpected Safari crash. | ||||
| CVE-2025-31115 | 1 Redhat | 1 Enterprise Linux | 2026-05-12 | 7.5 High |
| XZ Utils provide a general-purpose data-compression library plus command-line tools. In XZ Utils 5.3.3alpha to 5.8.0, the multithreaded .xz decoder in liblzma has a bug where invalid input can at least result in a crash. The effects include heap use after free and writing to an address based on the null pointer plus an offset. Applications and libraries that use the lzma_stream_decoder_mt function are affected. The bug has been fixed in XZ Utils 5.8.1, and the fix has been committed to the v5.4, v5.6, v5.8, and master branches in the xz Git repository. No new release packages will be made from the old stable branches, but a standalone patch is available that applies to all affected releases. | ||||
| CVE-2024-57951 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hrtimers: Handle CPU state correctly on hotplug Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to CPUHP_ONLINE: Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set to 1 throughout. However, during a CPU unplug operation, the tick and the clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online state, for instance CFS incorrectly assumes that the hrtick is already active, and the chance of the clockevent device to transition to oneshot mode is also lost forever for the CPU, unless it goes back to a lower state than CPUHP_HRTIMERS_PREPARE once. This round-trip reveals another issue; cpu_base.online is not set to 1 after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer(). Aside of that, the bulk of the per CPU state is not reset either, which means there are dangling pointers in the worst case. Address this by adding a corresponding startup() callback, which resets the stale per CPU state and sets the online flag. [ tglx: Make the new callback unconditionally available, remove the online modification in the prepare() callback and clear the remaining state in the starting callback instead of the prepare callback ] | ||||
| CVE-2024-56672 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Fix UAF in blkcg_unpin_online() blkcg_unpin_online() walks up the blkcg hierarchy putting the online pin. To walk up, it uses blkcg_parent(blkcg) but it was calling that after blkcg_destroy_blkgs(blkcg) which could free the blkcg, leading to the following UAF: ================================================================== BUG: KASAN: slab-use-after-free in blkcg_unpin_online+0x15a/0x270 Read of size 8 at addr ffff8881057678c0 by task kworker/9:1/117 CPU: 9 UID: 0 PID: 117 Comm: kworker/9:1 Not tainted 6.13.0-rc1-work-00182-gb8f52214c61a-dirty #48 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022 Workqueue: cgwb_release cgwb_release_workfn Call Trace: <TASK> dump_stack_lvl+0x27/0x80 print_report+0x151/0x710 kasan_report+0xc0/0x100 blkcg_unpin_online+0x15a/0x270 cgwb_release_workfn+0x194/0x480 process_scheduled_works+0x71b/0xe20 worker_thread+0x82a/0xbd0 kthread+0x242/0x2c0 ret_from_fork+0x33/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> ... Freed by task 1944: kasan_save_track+0x2b/0x70 kasan_save_free_info+0x3c/0x50 __kasan_slab_free+0x33/0x50 kfree+0x10c/0x330 css_free_rwork_fn+0xe6/0xb30 process_scheduled_works+0x71b/0xe20 worker_thread+0x82a/0xbd0 kthread+0x242/0x2c0 ret_from_fork+0x33/0x70 ret_from_fork_asm+0x1a/0x30 Note that the UAF is not easy to trigger as the free path is indirected behind a couple RCU grace periods and a work item execution. I could only trigger it with artifical msleep() injected in blkcg_unpin_online(). Fix it by reading the parent pointer before destroying the blkcg's blkg's. | ||||
| CVE-2024-53057 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT In qdisc_tree_reduce_backlog, Qdiscs with major handle ffff: are assumed to be either root or ingress. This assumption is bogus since it's valid to create egress qdiscs with major handle ffff: Budimir Markovic found that for qdiscs like DRR that maintain an active class list, it will cause a UAF with a dangling class pointer. In 066a3b5b2346, the concern was to avoid iterating over the ingress qdisc since its parent is itself. The proper fix is to stop when parent TC_H_ROOT is reached because the only way to retrieve ingress is when a hierarchy which does not contain a ffff: major handle call into qdisc_lookup with TC_H_MAJ(TC_H_ROOT). In the scenario where major ffff: is an egress qdisc in any of the tree levels, the updates will also propagate to TC_H_ROOT, which then the iteration must stop. net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) | ||||
| CVE-2024-50150 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmode should keep reference to parent The altmode device release refers to its parent device, but without keeping a reference to it. When registering the altmode, get a reference to the parent and put it in the release function. Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues like this: [ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000) [ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000) [ 46.612867] ================================================================== [ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129 [ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48 [ 46.614538] [ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535 [ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 46.616042] Workqueue: events kobject_delayed_cleanup [ 46.616446] Call Trace: [ 46.616648] <TASK> [ 46.616820] dump_stack_lvl+0x5b/0x7c [ 46.617112] ? typec_altmode_release+0x38/0x129 [ 46.617470] print_report+0x14c/0x49e [ 46.617769] ? rcu_read_unlock_sched+0x56/0x69 [ 46.618117] ? __virt_addr_valid+0x19a/0x1ab [ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d [ 46.618807] ? typec_altmode_release+0x38/0x129 [ 46.619161] kasan_report+0x8d/0xb4 [ 46.619447] ? typec_altmode_release+0x38/0x129 [ 46.619809] ? process_scheduled_works+0x3cb/0x85f [ 46.620185] typec_altmode_release+0x38/0x129 [ 46.620537] ? process_scheduled_works+0x3cb/0x85f [ 46.620907] device_release+0xaf/0xf2 [ 46.621206] kobject_delayed_cleanup+0x13b/0x17a [ 46.621584] process_scheduled_works+0x4f6/0x85f [ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10 [ 46.622353] ? hlock_class+0x31/0x9a [ 46.622647] ? lock_acquired+0x361/0x3c3 [ 46.622956] ? move_linked_works+0x46/0x7d [ 46.623277] worker_thread+0x1ce/0x291 [ 46.623582] ? __kthread_parkme+0xc8/0xdf [ 46.623900] ? __pfx_worker_thread+0x10/0x10 [ 46.624236] kthread+0x17e/0x190 [ 46.624501] ? kthread+0xfb/0x190 [ 46.624756] ? __pfx_kthread+0x10/0x10 [ 46.625015] ret_from_fork+0x20/0x40 [ 46.625268] ? __pfx_kthread+0x10/0x10 [ 46.625532] ret_from_fork_asm+0x1a/0x30 [ 46.625805] </TASK> [ 46.625953] [ 46.626056] Allocated by task 678: [ 46.626287] kasan_save_stack+0x24/0x44 [ 46.626555] kasan_save_track+0x14/0x2d [ 46.626811] __kasan_kmalloc+0x3f/0x4d [ 46.627049] __kmalloc_noprof+0x1bf/0x1f0 [ 46.627362] typec_register_port+0x23/0x491 [ 46.627698] cros_typec_probe+0x634/0xbb6 [ 46.628026] platform_probe+0x47/0x8c [ 46.628311] really_probe+0x20a/0x47d [ 46.628605] device_driver_attach+0x39/0x72 [ 46.628940] bind_store+0x87/0xd7 [ 46.629213] kernfs_fop_write_iter+0x1aa/0x218 [ 46.629574] vfs_write+0x1d6/0x29b [ 46.629856] ksys_write+0xcd/0x13b [ 46.630128] do_syscall_64+0xd4/0x139 [ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 46.630820] [ 46.630946] Freed by task 48: [ 46.631182] kasan_save_stack+0x24/0x44 [ 46.631493] kasan_save_track+0x14/0x2d [ 46.631799] kasan_save_free_info+0x3f/0x4d [ 46.632144] __kasan_slab_free+0x37/0x45 [ 46.632474] ---truncated--- | ||||
| CVE-2024-50127 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: fix use-after-free in taprio_change() In 'taprio_change()', 'admin' pointer may become dangling due to sched switch / removal caused by 'advance_sched()', and critical section protected by 'q->current_entry_lock' is too small to prevent from such a scenario (which causes use-after-free detected by KASAN). Fix this by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update 'admin' immediately before an attempt to schedule freeing. | ||||
| CVE-2024-50121 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will release all resources related to the hashed `nfs4_client`. If the `nfsd_client_shrinker` is running concurrently, the `expire_client` function will first unhash this client and then destroy it. This can lead to the following warning. Additionally, numerous use-after-free errors may occur as well. nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads expire_client nfsd_shutdown_net unhash_client ... nfs4_state_shutdown_net /* won't wait shrinker exit */ /* cancel_work(&nn->nfsd_shrinker_work) * nfsd_file for this /* won't destroy unhashed client1 */ * client1 still alive nfs4_state_destroy_net */ nfsd_file_cache_shutdown /* trigger warning */ kmem_cache_destroy(nfsd_file_slab) kmem_cache_destroy(nfsd_file_mark_slab) /* release nfsd_file and mark */ __destroy_client ==================================================================== BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on __kmem_cache_shutdown() -------------------------------------------------------------------- CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1 dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xac/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e ==================================================================== BUG nfsd_file_mark (Tainted: G B W ): Objects remaining nfsd_file_mark on __kmem_cache_shutdown() -------------------------------------------------------------------- dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xc8/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e To resolve this issue, cancel `nfsd_shrinker_work` using synchronous mode in nfs4_state_shutdown_net. | ||||