Export limit exceeded: 413914 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413914 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98777 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix leaked fd fixups on TF_UPDATE_TXN supersede When a TF_UPDATE_TXN transaction supersedes a pending async transaction in a frozen process, the outdated transaction is freed with kfree() directly. This skips binder_free_txn_fixups(), leaking all binder_txn_fd_fixup entries and their fget()'d struct file references. The leaked file refcounts never reach zero, so the struct file objects are permanently pinned in memory. They survive process exit and accumulate across invocations until file-max exhaustion. Every other transaction cleanup path (binder_free_transaction(), binder_transaction() error paths, binder_release_work()) correctly calls binder_free_txn_fixups(). Add the missing call before kfree() in the t_outdated cleanup block. | ||||
| CVE-2026-98775 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nitro_enclaves: fix use-after-free on SLOT_ALLOC failure When ne_create_vm_ioctl() fails the SLOT_ALLOC request after anon_inode_getfile() has succeeded, the error path calls fput(enclave_file) and then frees ne_enclave. In normal userspace context, fput() defers the final __fput() via task_work. ne_enclave_release() therefore runs after ne_enclave has already been freed and dereferences ne_enclave->slot_uid, causing a use-after-free: KASAN: slab-use-after-free in ne_enclave_release. The enclave has no slot allocated and is not yet linked into the enclaves list on this error path, so ne_enclave_release() is expected to return early when slot_uid is zero. However, reading slot_uid already accesses the freed object. Clear enclave_file->private_data before fput() on the error path. ne_enclave_release() then returns immediately when private_data is NULL, leaving the ioctl error path as the sole owner of ne_enclave. This is safe because the file has not been fd_install()'d yet. Tested on an AWS EC2 m5.2xlarge with CONFIG_KASAN=y. Without the patch, the reproducer triggers a KASAN slab-use-after-free on every SLOT_ALLOC failure. With the patch, no KASAN report is produced and the SLOT_ALLOC error is still returned. Normal enclave creation and teardown are unaffected. | ||||
| CVE-2026-98773 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: cdc-acm: skip URB restart in port_shutdown if disconnected acm_port_shutdown() is called from the tty-port machinery whenever the last user closes the port. acm_disconnect() sets acm->disconnected and calls tty_port_tty_vhangup(), which eventually triggers port_shutdown(). At that point acm_disconnect() has already called acm_poison_urbs() and is about to free the control and read URBs. However, acm_port_shutdown() unconditionally calls acm_unpoison_urbs() and, when the ALWAYS_POLL_CTRL quirk is set, immediately re-submits the ctrlurb and all read URBs. If the concurrent acm_disconnect() then frees those URBs and their DMA buffers while they are in-flight, the result is a use-after-free in acm_ctrl_irq() or acm_read_bulk_callback() accessing the freed DMA memory. Fix by checking acm->disconnected after draining the delayed anchor and returning early: if we are in a disconnect path the URBs must remain poisoned and must not be resubmitted. The early return is placed after the delayed-anchor drain loop because that loop only cancels write-side accounting (wb->use = false and autopm counter) and does not touch the hardware path. | ||||
| CVE-2026-98764 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC When user space sets up FunctionFS with only full-speed descriptors (e.g., flags = FUNCTIONFS_HAS_FS_DESC) and the gadget operates at a higher speed (such as USB_SPEED_HIGH or USB_SPEED_SUPER), config_ep_by_speed() detects that the function lacks descriptors for the current speed, logs a warning, and falls back to full-speed descriptors. The endpoint is then successfully enabled via usb_ep_enable(), and epfile->ep becomes valid. However, when user space subsequently issues the FUNCTIONFS_ENDPOINT_DESC ioctl to query the endpoint descriptor, ffs_epfile_ioctl() selects the descriptor index solely based on gadget->speed: switch (epfile->ffs->gadget->speed) { case USB_SPEED_SUPER: case USB_SPEED_SUPER_PLUS: desc_idx = 2; break; case USB_SPEED_HIGH: desc_idx = 1; break; default: desc_idx = 0; } desc = epfile->ep->descs[desc_idx]; memcpy(&desc1, desc, desc->bLength); Because user space only supplied full-speed descriptors, epfile->ep->descs[1] is NULL. Dereferencing desc->bLength triggers an immediate kernel NULL pointer dereference panic. Fix this by falling back through lower speed descriptors if the current speed descriptor was not supplied, matching the fallback logic in config_ep_by_speed() and historical f_fs behavior. If still missing, fall back to epfile->ep->ep->desc (the active descriptor), and return -EINVAL safely if no valid descriptor is found. In addition, mark desc as const to match struct usb_ep::desc and avoid discarding qualifiers. | ||||
| CVE-2026-98760 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: fix uninitialized typec_partner_desc in tps6598x_connect() tps6598x_connect() passes a stack-allocated typec_partner_desc to typec_register_partner() after initializing only usb_pd, accessory and identity. typec_register_partner() copies attach and deattach from the descriptor into the partner. With those fields left unset, garbage function pointers may be stored and later invoked from typec_partner_link_device() when a USB device is linked to the port. Uninitialized pd_revision and usb_capability similarly leak stack data through partner sysfs. Zero-initialize the descriptor so optional callbacks remain NULL and the remaining fields are zero. | ||||
| CVE-2026-98757 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix use-after-free in cdns3_gadget_exit() cdns3_gadget_start() arms two works on system_freezable_wq: pending_status_wq for the deferred ep0 status stage and aligned_buf_wq for realigned request buffers. Both handlers use the cdns3_device the works are embedded in, and cdns3_pending_setup_status_handler() also calls the ep0 request completion. cdns3_gadget_exit() does not wait for these works. It frees all endpoints and aligned buffers and drops the last reference to the gadget device, which frees priv_dev, so a work queued before the exit can run after the free. Fix this by waiting for both works after the gadget driver is unbound and the IRQ is freed, when no new work can be queued, and before the endpoints and buffers are released. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98756 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: Fix NULL pointer dereference in cdns3_pci_probe The Cadence USBSS controller is a two-function PCI device. The first probed function allocates the driver data and stores it with pci_set_drvdata(), while the second function reuses it via pci_get_drvdata() when pci_is_enabled() reports that the first function has already been probed. When the second function is probed while the first one has been enabled but has not yet set its driver data, pci_get_drvdata() returns NULL, and the subsequent wrap->devfn assignment dereferences a NULL pointer and crashes the kernel. logs: Call trace: cdns3_pci_probe+0xa4/0x300 local_pci_probe+0x44/0xa8 pci_call_probe+0x54/0x158 pci_device_probe+0x84/0x100 really_probe+0x184/0x3d0 __driver_probe_device+0x80/0x178 driver_probe_device+0x44/0xe8 __driver_attach+0xec/0x1f8 bus_for_each_dev+0x7c/0xe0 driver_attach+0x28/0x38 bus_add_driver+0x110/0x238 driver_register+0x64/0x128 __pci_register_driver+0x50/0x60 cdns3_pci_driver_init+0x28/0x38 do_one_initcall+0x5c/0x280 do_initcalls+0x104/0x1d8 kernel_init_freeable+0x140/0x218 kernel_init+0x28/0x1f8 ret_from_fork+0x10/0x20 Return -EPROBE_DEFER in this case so that probing is retried after the first function has completed its probe. | ||||
| CVE-2026-98755 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: tty: vcc: zero-initialize control packet in vcc_send_ctl() The stack-allocated struct vio_vcc pkt was partially initialized, leaving the tag.stype_env field uninitialized before being sent via ldc_write(), potentially leaking kernel stack data to the LDC peer. | ||||
| CVE-2026-98754 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tty: vcc: hold port lock when clearing tty pointer in vcc_cleanup vcc_cleanup() sets port->tty to NULL without holding port->lock, racing with vcc_event() LDC callbacks that read port->tty under port->lock and then use tty->port. This can cause a use-after-free when the callback dereferences tty->port after cleanup has already destroyed and freed it. | ||||
| CVE-2026-98753 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: tty_port: restore TTY_IO_ERROR on activation failure Make sure to restore the TTY_IO_ERROR flag if activation fails to prevent I/O attempts on a port that is gone or powered down. This specifically avoids issues like kernel panic due to unclocked accesses or NULL-pointer dereferences when accessing powered down or deregistered ports when a TTY ioctl races with hangup and open. Note that the flag is set again in tty_port_close() but not restoring it on activation failure leaves a window where drivers fail to handle the ioctl-hangup race. | ||||
| CVE-2026-98752 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: port: fix tty_port_tty_vhangup() race Drivers rely on tty_port_tty_vhangup() to synchronously hang up their ports before tearing down resources as part of deregistration (e.g. on physical disconnect). If tty_port_tty_vhangup() races with another hangup it may however return before the port has been shut down. This is in turn can lead to use-after-free and NULL-pointer dereferences in racing ioctls (including a synchronous hangup) and in processing of racing asynchronous hangups (carrier loss). Add the missing serialisation to tty_port_tty_vhangup() and tty_port_hangup() so that the former does not return until the port has been shut down also when there is a racing hangup. Note that serial core does not use tty_port_hangup(), but it already holds the port mutex when clearing port->tty and shutting down the port in uart_hangup(). | ||||
| CVE-2026-98751 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: abort break signalling on hangup The break ioctls can race with hangup and end up calling into a tty driver for a device that is already gone or powered down. Drivers must handle this race, but TCSBRK and TCSBRKP should still be aborted to avoid calling back into the driver after a user-controlled timeout (possibly even after the tty has been reopened). Note that drivers should disable any break state on shutdown so just return on hangup (calling break_ctl() again is racy and will most likely fail for drivers handling the race). | ||||
| CVE-2026-98743 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rt1017-sdca-sdw: fix uninitialized stream_config->type stream_config is not initialized before being passed to sdw_stream_add_slave(). The type field may contain garbage and is later copied to stream->type by sdw_config_stream(). Zero-initialize stream_config so type defaults to SDW_STREAM_PCM. While at it, use snd_sdw_params_to_config() helper instead of open-coding the same logic. | ||||
| CVE-2026-98741 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ua101: reject mismatched capture/playback packet sizes detect_usb_format() cross-checks bSubframeSize, bBitResolution and tSamFreq between the capture and playback interfaces, but never relates the two endpoints' wMaxPacketSize and bNrChannels. Each playback URB gets a buffer of ua->playback.max_packet_bytes, while the number of bytes written into it is derived from the capture stream: capture_urb_complete() computes frames from the received capture packet and capture.frame_bytes, and start_usb_playback() and playback_work() multiply that by playback.frame_bytes. A device declaring a large capture wMaxPacketSize with few capture channels and a small playback wMaxPacketSize with many playback channels therefore memset()s and memcpy()s past the end of the playback buffer, in open() of the PCM node the driver registers during probe. usb_submit_urb() rejects the over-long iso_frame_desc[0].length with -EMSGSIZE, but only after the write. Reject such descriptors at probe time. Genuine UA-101/UA-1000 hardware declares proportional packet sizes and is unaffected. BUG: KASAN: slab-out-of-bounds in start_usb_playback (sound/usb/misc/ua101.c:586) Write of size 2048 at addr ffff8881098f3c00 by task exploit/5021 Call Trace: __asan_memset (mm/kasan/shadow.c:84) start_usb_playback (sound/usb/misc/ua101.c:586) playback_pcm_open (sound/usb/misc/ua101.c:679) snd_pcm_open_substream (sound/core/pcm_native.c:2829) snd_pcm_open (sound/core/pcm_native.c:2865 sound/core/pcm_native.c:2932) snd_pcm_playback_open (sound/core/pcm_native.c:2891) snd_open (sound/core/sound.c:166) chrdev_open (fs/char_dev.c:411) do_dentry_open (fs/open.c:996) vfs_open (fs/open.c:1101) path_openat (fs/namei.c:4837 fs/namei.c:5000) do_file_open (fs/namei.c:5029) do_sys_openat2 (fs/open.c:1417) __x64_sys_openat (fs/open.c:1423 fs/open.c:1439 fs/open.c:1434) do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address belongs to the object at ffff8881098f3c00 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 0 bytes inside of allocated 168-byte region [ffff8881098f3c00, ffff8881098f3ca8) | ||||
| CVE-2026-98739 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix initial port reference race For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and __rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the initial tty_port reference. The release path tests the bit separately from the install path setting it, so both can drop that reference. The synchronous hangup does not prevent this race: port->tty is not assigned until tty_port_open(), after installation. The following interleaving is possible: 1. Install and release each obtain a reference with rfcomm_dev_get(). 2. Release observes RFCOMM_TTY_OWNED clear. 3. Install sets RFCOMM_TTY_OWNED and drops the initial reference. 4. Release drops the same initial reference again. 5. TTY cleanup drops its reference and frees the device. 6. Release performs its final tty_port_put() on the freed port. KASAN reported: BUG: KASAN: slab-use-after-free in tty_port_put+0x22/0x190 Write of size 4 at addr ffff8881001d3d5c by task poc/92 Call Trace: tty_port_put+0x22/0x190 rfcomm_dev_ioctl+0x1d4/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Allocated by task 88: rfcomm_dev_ioctl+0x8f6/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Freed by task 65: kfree+0x131/0x3c0 rfcomm_dev_destruct+0x23b/0x2f0 release_one_tty+0xc1/0x370 process_one_work+0x661/0x1090 Use test_and_set_bit() in both paths so that only the caller that changes RFCOMM_TTY_OWNED from clear to set drops the initial reference. Each path keeps its own lookup reference until release or TTY cleanup, preserving the existing callback ordering and error handling. | ||||
| CVE-2026-98736 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: Lock parent access during enhanced SCO setup hci_enhanced_setup_sync() runs on the request workqueue without the hci_dev_lock held by its caller when setup was queued. Its CVSD capability check and find_next_esco_param() dereference conn->parent while the receive workqueue can unlink and release that parent. The following interleaving can cause a use-after-free: hci_enhanced_setup_sync() hci_disconn_complete_evt() load conn->parent hci_dev_lock() hci_conn_del(ACL parent) unlink SCO child drop link's parent reference clear child->parent release ACL parent bt_link_release() kfree(parent) hci_dev_unlock() read parent->features[0][3] The reference held for the queued SCO child does not keep its ACL parent alive after unlinking. Commit 42de40abe25d ("Bluetooth: hci_conn: fix the SCO setup context lifetime") protects the child stored in the queued context, but leaves these parent accesses unprotected. With a 40 ms diagnostic delay after loading conn->parent, an instrumented kernel based on fd179f8a05be, which already contains 42de40abe25d, BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0xda5/0xdf0 Read of size 1 at addr ffff888102204047 by task kworker/u17:0/93 Call Trace: hci_enhanced_setup_sync+0xda5/0xdf0 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x6b4/0x10e0 Allocated by task 92: __hci_conn_add+0x304/0x1df0 hci_connect_acl+0x349/0x3e0 hci_connect_sco+0x3b/0x9a0 sco_sock_connect+0x475/0xca0 Freed by task 94: kfree+0x121/0x3c0 bt_link_release+0x79/0xa0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x524/0xe30 hci_disconn_complete_evt+0x403/0x8c0 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 The accessed address is 71 bytes into the freed ACL parent, at its features[0][3] byte; the queued SCO child is a different object. The diagnostic preserves the loaded parent across the delay, matching the unmodified compiled capability check, and does not change the parent references or teardown path. Hold hci_dev_lock() across the codec switch, including every call to find_next_esco_param(), and release it on all selection errors. Keep configure_datapath_sync() outside the critical section because it waits for HCI events. Preserve parameter selection and existing return values. | ||||
| CVE-2026-98734 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent() or while dequeuing packets and updating conn->sent. KASAN reported: BUG: KASAN: slab-use-after-free in hci_low_sent+0x730/0x840 Workqueue: hci0 hci_tx_work Call Trace: hci_low_sent+0x730/0x840 hci_sched_iso+0x25e/0x4d0 hci_tx_work+0x239/0xcb0 Allocated by task 93: __hci_conn_add+0x16f/0x1b40 hci_bind_bis+0x782/0x17b0 hci_connect_bis+0xa0/0x510 iso_sock_connect+0x589/0x1050 Freed by task 88: kfree+0x131/0x3c0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x55a/0xe80 hci_disconnect_sync+0x156/0x180 hci_abort_conn_sync+0x3e7/0x940 hci_cmd_sync_work+0x13c/0x290 Hold hci_dev_lock() across connection selection and transmission in both SCO and ISO scheduling, serializing them with connection teardown. This also prevents queuing completion timestamps after the connection queues have been purged. Extending RCU across transmission would be unsafe because the transmit path can sleep. Keep the ISO timeout check outside the mutex since hci_link_tx_to() takes it itself. The preceding channel fix already holds this mutex in the ACL and LE schedulers, which call the SCO scheduler between packets. Move the SCO body to __hci_sched_sco(), assert that its caller holds the mutex, and use it directly from these locked paths. Keep a locking hci_sched_sco() wrapper for the direct calls from hci_tx_work(). This avoids recursively acquiring the device mutex while preserving the scheduling order. Remove the obsolete claim that connection removal disables TX. | ||||
| CVE-2026-98732 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 3.4 Low |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1. | ||||
| CVE-2026-98726 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the remaining buffer instead. This rejects inconsistent ANA data before dereferencing a truncated group descriptor or walking an oversized namespace ID array. | ||||
| CVE-2026-98717 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy When walking shadow page tables, immediately terminate the walk if the root is a "dummy" root, i.e. a root whose top-level page table is backed by the zero page, but otherwise doesn't exist. If memslot creation races with a stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align, KVM will attempt to walk shadow page tables using the zero page and hit a NULL pointer deref. BUG: kernel NULL pointer dereference, address: 0000000000000021 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 30 UID: 1000 PID: 941 Comm: qemu Not tainted 7.2.0-rc2-1b731e5ded48-next-vm #1741 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__kvm_mmu_invalidate_addr+0xea/0x210 [kvm] Call Trace: <TASK> kvm_mmu_invalidate_addr+0x92/0xe0 [kvm] __kvm_inject_emulated_page_fault+0x67/0x80 [kvm] ept_page_fault+0x160/0x850 [kvm] kvm_mmu_do_page_fault+0x102/0x1f0 [kvm] kvm_mmu_page_fault+0x8e/0x6b0 [kvm] vmx_handle_exit+0x163/0x640 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x960/0x2120 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f606d0b53bb Opportunistically harden the shadow walks against fully invalid roots, but WARN, as all callers are expected/required to pre-check for a valid root. Don't WARN in the dummy root case as the whole point of using a dummy root is to provide a root that's valid enough to enter the guest, i.e. it should Just Work for all flows except those that *need* to know about dummy roots. Alternatively, KVM could allocate a dedicated page and associated shadow page structure for the dummy root, which is very tempting as it such an approach should be more resilient against unexpected behavior. But that would be a much larger and thus riskier change than simply terminating walks of dummy roots. | ||||