Export limit exceeded: 25326 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25326 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90407 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90423 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix UAF in ODP init error-handling path rxe_odp_mr_init_user() stores &umem_odp->umem in mr->umem before calling rxe_odp_init_pages(). If rxe_odp_init_pages() fails, rxe_odp_mr_init_user() releases umem_odp and returns an error. rxe_reg_user_mr() then unwinds the error through rxe_cleanup(), rxe_mr_cleanup(), ib_umem_release(mr->umem). There is an IS_ERR_OR_NULL(umem) check at the start of ib_umem_release(). But since mr->umem is NOT reset to NULL in the error handling path of rxe_odp_mr_init_user(), the check passes and it reads already-freed fields like umem->is_dmabuf, causing UAF. Fix the UAF by clearing mr->umem after releasing the failed ODP umem so the MR cleanup path does not release it again. | ||||
| CVE-2026-93037 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Propagate sdma_txinit_ahg() errors set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg(). If sdma_txinit_ahg() fails, it returns before initializing tx->txreq. However, set_txreq_header_ahg() ignores the error and returns the AHG change count, causing the caller to continue processing the request as though initialization had succeeded. Propagate sdma_txinit_ahg() failures to the caller and abort request processing when initialization fails. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-90429 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from the destroy callback and from the init-failure unwind in the alloc handler. It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but nothing serializes that against the error interrupt: tegra241_cmdqv_isr() reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is about to be freed (a use-after-free). deinit_vintf() also returns idx to the IDA before clearing the slot, so a concurrent create that reuses idx can publish its new vintf into the slot, only for this teardown to erase it again with the stale NULL store. On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of a published vintf such as vintf->base. A plain store gives no ordering on a weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make the ISR pick a vintf the moment it is published, before its fields are set or tegra241_vintf_hw_init() runs. The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures() first creates VINTF0, so the slot 0 read needs the same NULL check. Publish every slot with an smp_store_release(), and read each slot in the ISR with an smp_load_acquire() under a NULL check, so the ISR always sees a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and synchronize_irq() prior to returning idx to the IDA, so no vintf is freed under a running handler and no reused idx is clobbered. | ||||
| CVE-2026-92504 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int3400: clean up ODVP on probe failures evaluate_odvp() creates per-ODVP sysfs files before the thermal zone and later probe resources are registered. The current unwind path only calls cleanup_odvp() from the late sysfs failure path, so failures after evaluate_odvp() but before that label, including thermal_tripless_zone_device_register() failures, leave the ODVP files and storage behind. Move the ODVP cleanup to the common ART/TRT unwind path so every failure after evaluate_odvp() releases the ODVP state. Also clear the cached ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call it for partial setup failures while probe continues. | ||||
| CVE-2026-92511 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_cq_user() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_cq_user(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_cq_user(), ensuring that the CQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a CQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||
| CVE-2026-93095 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: validate thread record before delete key rebuild hfsplus_delete_cat() is called with str == NULL when the last open reference to an unlinked HFS+ hardlink backing inode is closed. In that case, the function finds the catalog thread by CNID and rebuilds the catalog key from thread.nodeName. That reconstruction path reads thread.nodeName.length directly from the catalog B-tree into fd.search_key and then copies length * 2 bytes into fd.search_key->cat.name.unicode. It does not first check that the found record is a thread record or that its size matches the thread name. A corrupted image can therefore provide an oversized thread name length and make hfs_bnode_read() write past the catalog search-key allocation. Read the CNID record through hfsplus_brec_read_cat(), which bounds the record read to sizeof(hfsplus_cat_entry) and verifies that a thread record's size exactly matches nodeName.length. Together, these checks ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread records before building the delete key from the validated thread name. Share the thread-record-type helper between hfsplus_find_cat() and hfsplus_delete_cat(). | ||||
| CVE-2026-93121 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which calls dma_fence_put() on the fence. However, at that point the fence has only been kmalloc'd — dma_fence_init() has not been called yet, so the refcount and the fence ops are uninitialized. Calling dma_fence_put() on such an object leads to undefined behavior. Use kfree() instead, since the fence is just a plain allocation at this stage, and rename the label to err_fence_free to reflect the actual cleanup action. | ||||
| CVE-2026-90402 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix controller cleanup on EDL sysfs failure mhi_register_controller() adds the controller device before creating the optional trigger_edl sysfs file. If sysfs_create_file() fails, the error path only drops the device reference and leaves the device registered. Hence, call device_del() in the error path before put_device(). | ||||
| CVE-2026-90403 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: pci: fix error path in rtl_pci_probe() In the last error path in rtl_pci_probe(), the cleanup functions are skipped due to a wrong goto label. Moreover, the successful call to rtl_init_rfkill(), ieee80211_register_hw(), rtl_debug_add_one() have to be reverted. Fix this issue by updating the labels and adding the relevant cleanup functions to the last error path. | ||||
| CVE-2026-93039 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: Keep link pointers valid on realloc failure meson_card_reallocate_links() grows the DAI link and private data arrays with two consecutive krealloc() calls and updates the owner pointers only after both calls have succeeded. A successful krealloc() may move the data: it frees the old block and returns a new one. When that happens for the link array and the second krealloc() then fails, card->dai_link still points to the block that krealloc() already freed, and the error path frees the new block too. The probe error path then calls meson_card_clean_references(), which dereferences card->dai_link and kfree()s it again, resulting in a use-after-free and a double free. Commit card->dai_link and card->num_links right after the first krealloc() succeeds, so the pointer always refers to a valid allocation that meson_card_clean_references() can walk and free. krealloc() with __GFP_ZERO zero-initializes the added entries, so walking them on the error path is safe. With both failure paths reduced to a plain return, drop the goto labels and the error message. | ||||
| CVE-2026-93042 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Terminate all descriptors without callbacks The DMA Engine client documentation says in the "Terminate APIs" section of Documentation/driver-api/dmaengine/client.rst: "No callback functions will be called for any incomplete transfers." dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches the interrupt handler. This schedules a callback for the active descriptor and leaves other issued or submitted descriptors queued. A late callback after dmaengine_terminate_sync() can dereference client state that has already been freed, while leftover descriptors may later restart into reused buffers or leak. Move all issued and submitted descriptors to the terminated list whenever termination completes. For a pending STOP, do this from both the DONE and ABORT paths. Complete their cookies in order without scheduling callbacks. A STOP can remain pending until the running transfer raises an interrupt. Make device_synchronize() wait for such a pending STOP to complete before releasing terminated descriptors. Reuse it from free_chan_resources(), then release the remaining virt-dma resources. Sleep instead of busy-polling while waiting, and warn if the existing timeout expires. | ||||
| CVE-2026-93070 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: ipu6: Do not free aux device pdata after init ipu6_bus_initialize_device() stores the isys/psys pdata pointer in struct ipu6_bus_device and initializes the auxiliary device. After that point, error unwinding must drop the auxiliary device reference and let ipu6_bus_release() free both the bus device and adev->pdata. The isys and psys init paths already call put_device() when MMU initialization fails, and ipu6_bus_add_device() calls auxiliary_device_uninit() on auxiliary_device_add() failure. Both paths therefore run the bus release callback. The extra kfree(pdata) in the callers can release the same object a second time. Remove the manual pdata frees after the auxiliary device has been initialized. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-92507 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_dealloc_pd_user() When accessing a PD via the netlink path the only synchronization mechanism for the said PD is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_dealloc_pd_user(), which is too late, since by that point vendor-specific resources associated with the PD might already be freed. This can leave a short window where the PD remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_dealloc_pd_user(), ensuring that the PD is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a PD that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||
| CVE-2026-92508 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_free_cq() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_free_cq(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_del() call to be before the freeing of the vendor-specific resources ensuring that the CQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a CQ that is in the process of destruction. | ||||
| CVE-2026-92510 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_srq_user() When accessing a SRQ via the netlink path the only synchronization mechanism for the said SRQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_srq_user(), which is too late, since by that point vendor-specific resources associated with the SRQ might already be freed. This can leave a short window where the SRQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_srq_user(), ensuring that the SRQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a SRQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||
| CVE-2026-92518 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix kernel stack corruption in tailcall with CFI When CONFIG_CFI_CLANG is enabled, prog->bpf_func already skips the kcfi instruction during setup. Including it again in the tailcall jump offset causes it to jump over an extra 4 bytes, skipping the stack pointer adjustment, which will result in kernel stack corruption. | ||||
| CVE-2026-92525 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.queue is a ring the application writes directly, so rxe_post_send() takes the is_user branch and only schedules send_task without validating the WQE. rxe_requester() consumes it in place via req_next_wqe() and calls copy_data(), which indexes &wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge. Only the kernel path bounds num_sge (validate_send_wr()); the user WQE is never checked, so a local unprivileged user can post a WQE with an out-of-range cur_sge or oversized num_sge and force an out-of-bounds read of the per-WQE sge array in copy_data() (vmalloc OOB read, local DoS). Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way get_srq_wqe() already guards SRQ entries, and bound cur_sge only when the WQE carries payload (dma.resid): copy_data() returns early on a zero-length copy before touching dma->sge[], so a zero-payload WQE -- the only kind a max_sge == 0 QP can post -- stays valid. Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone. | ||||
| CVE-2026-93063 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: check SAP message length before reading it Verify the SAP message size is not larger than the local buffer before reading the message to avoid buffer overflow. | ||||
| CVE-2026-93074 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: use __va(phys) for kaddr in direct_access Use __va(phys) instead of virt_addr + linear_offset for the kaddr return in __fsdev_dax_direct_access(). The previous code added a device-linear byte offset to virt_addr (which is __va of ranges[0]), but for multi-range devices with physical gaps between ranges, this linear arithmetic crosses the gap and produces a wrong kernel virtual address. Using __va(phys) where phys comes from dax_pgoff_to_phys() is correct for any range layout because the direct map translates each physical address independently. This leaves dev_dax->virt_addr write-only, so remove the field (suggested by Dave Jiang). | ||||