Export limit exceeded: 11215 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11215 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31702 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io() In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring the F2FS_WB_CP_DATA counter to zero, unblocking f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount CPU. The unmount path then proceeds to call f2fs_destroy_page_array_cache(sbi), which destroys sbi->page_array_slab via kmem_cache_destroy(), and eventually kfree(sbi). Meanwhile, the bio completion callback is still executing: when it reaches page_array_free(sbi, ...), it dereferences sbi->page_array_slab — a destroyed slab cache — to call kmem_cache_free(), causing a use-after-free. This is the same class of bug as CVE-2026-23234 (which fixed the equivalent race in f2fs_write_end_io() in data.c), but in the compressed writeback completion path that was not covered by that fix. Fix this by moving dec_page_count() to after page_array_free(), so that all sbi accesses complete before the counter decrement that can unblock unmount. For non-last folios (where atomic_dec_return on cic->pending_pages is nonzero), dec_page_count is called immediately before returning — page_array_free is not reached on this path, so there is no post-decrement sbi access. For the last folio, page_array_free runs while the F2FS_WB_CP_DATA counter is still nonzero (this folio has not yet decremented it), keeping sbi alive, and dec_page_count runs as the final operation. | ||||
| CVE-2026-31686 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/kasan: fix double free for kasan pXds kasan_free_pxd() assumes the page table is always struct page aligned. But that's not always the case for all architectures. E.g. In case of powerpc with 64K pagesize, PUD table (of size 4096) comes from slab cache named pgtable-2^9. Hence instead of page_to_virt(pxd_page()) let's just directly pass the start of the pxd table which is passed as the 1st argument. This fixes the below double free kasan issue seen with PMEM: radix-mmu: Mapped 0x0000047d10000000-0x0000047f90000000 with 2.00 MiB pages ================================================================== BUG: KASAN: double-free in kasan_remove_zero_shadow+0x9c4/0xa20 Free of addr c0000003c38e0000 by task ndctl/2164 CPU: 34 UID: 0 PID: 2164 Comm: ndctl Not tainted 6.19.0-rc1-00048-gea1013c15392 #157 VOLUNTARY Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_012) hv:phyp pSeries Call Trace: dump_stack_lvl+0x88/0xc4 (unreliable) print_report+0x214/0x63c kasan_report_invalid_free+0xe4/0x110 check_slab_allocation+0x100/0x150 kmem_cache_free+0x128/0x6e0 kasan_remove_zero_shadow+0x9c4/0xa20 memunmap_pages+0x2b8/0x5c0 devm_action_release+0x54/0x70 release_nodes+0xc8/0x1a0 devres_release_all+0xe0/0x140 device_unbind_cleanup+0x30/0x120 device_release_driver_internal+0x3e4/0x450 unbind_store+0xfc/0x110 drv_attr_store+0x78/0xb0 sysfs_kf_write+0x114/0x140 kernfs_fop_write_iter+0x264/0x3f0 vfs_write+0x3bc/0x7d0 ksys_write+0xa4/0x190 system_call_exception+0x190/0x480 system_call_vectored_common+0x15c/0x2ec ---- interrupt: 3000 at 0x7fff93b3d3f4 NIP: 00007fff93b3d3f4 LR: 00007fff93b3d3f4 CTR: 0000000000000000 REGS: c0000003f1b07e80 TRAP: 3000 Not tainted (6.19.0-rc1-00048-gea1013c15392) MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 48888208 XER: 00000000 <...> NIP [00007fff93b3d3f4] 0x7fff93b3d3f4 LR [00007fff93b3d3f4] 0x7fff93b3d3f4 ---- interrupt: 3000 The buggy address belongs to the object at c0000003c38e0000 which belongs to the cache pgtable-2^9 of size 4096 The buggy address is located 0 bytes inside of 4096-byte region [c0000003c38e0000, c0000003c38e1000) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3c38c head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:c0000003bfd63e01 flags: 0x63ffff800000040(head|node=6|zone=0|lastcpupid=0x7ffff) page_type: f5(slab) raw: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 head: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000002 c00c000000f0e301 00000000ffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004 page dumped because: kasan: bad access detected [ 138.953636] [ T2164] Memory state around the buggy address: [ 138.953643] [ T2164] c0000003c38dff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953652] [ T2164] c0000003c38dff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953661] [ T2164] >c0000003c38e0000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953669] [ T2164] ^ [ 138.953675] [ T2164] c0000003c38e0080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953684] [ T2164] c0000003c38e0100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953692] [ T2164] ================================================================== [ 138.953701] [ T2164] Disabling lock debugging due to kernel taint | ||||
| CVE-2026-31597 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY, as documented in mm/filemap.c: "If our return value has VM_FAULT_RETRY set, it's because the mmap_lock may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()." When this happens, a concurrent munmap() can call remove_vma() and free the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call dereferences it -- a use-after-free. Fix this by saving ip_blkno as a plain integer before calling filemap_fault(), and removing vma from the trace event. Since ip_blkno is copied by value before the lock can be dropped, it remains valid regardless of what happens to the vma or inode afterward. | ||||
| CVE-2026-31587 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm: move component registration to unmanaged version q6apm component registers dais dynamically from ASoC toplology, which are allocated using device managed version apis. Allocating both component and dynamic dais using managed version could lead to incorrect free ordering, dai will be freed while component still holding references to it. Fix this issue by moving component to unmanged version so that the dai pointers are only freeded after the component is removed. ================================================================== BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426 Tainted: [W]=WARN Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024 Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface] Call trace: show_stack+0x28/0x7c (C) dump_stack_lvl+0x60/0x80 print_report+0x160/0x4b4 kasan_report+0xac/0xfc __asan_report_load8_noabort+0x20/0x34 snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core] devm_component_release+0x30/0x5c [snd_soc_core] devres_release_all+0x13c/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Allocated by task 77: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x44/0x58 __kasan_kmalloc+0xbc/0xdc __kmalloc_node_track_caller_noprof+0x1f4/0x620 devm_kmalloc+0x7c/0x1c8 snd_soc_register_dai+0x50/0x4f0 [snd_soc_core] soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core] snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core] audioreach_tplg_init+0x124/0x1fc [snd_q6apm] q6apm_audio_probe+0x10/0x1c [snd_q6apm] snd_soc_component_probe+0x5c/0x118 [snd_soc_core] soc_probe_component+0x44c/0xaf0 [snd_soc_core] snd_soc_bind_card+0xad0/0x2370 [snd_soc_core] snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core] devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core] x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100] platform_probe+0xc0/0x188 really_probe+0x188/0x804 __driver_probe_device+0x158/0x358 driver_probe_device+0x60/0x190 __device_attach_driver+0x16c/0x2a8 bus_for_each_drv+0x100/0x194 __device_attach+0x174/0x380 device_initial_probe+0x14/0x20 bus_probe_device+0x124/0x154 deferred_probe_work_func+0x140/0x220 process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Freed by task 3426: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 __kasan_save_free_info+0x4c/0x80 __kasan_slab_free+0x78/0xa0 kfree+0x100/0x4a4 devres_release_all+0x144/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-31581 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix use-after-free on disconnect In usb6fire_chip_abort(), the chip struct is allocated as the card's private data (via snd_card_new with sizeof(struct sfire_chip)). When snd_card_free_when_closed() is called and no file handles are open, the card and embedded chip are freed synchronously. The subsequent chip->card = NULL write then hits freed slab memory. Call trace: usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline] usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182 usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458 ... hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953 Fix by moving the card lifecycle out of usb6fire_chip_abort() and into usb6fire_chip_disconnect(). The card pointer is saved in a local before any teardown, snd_card_disconnect() is called first to prevent new opens, URBs are aborted while chip is still valid, and snd_card_free_when_closed() is called last so chip is never accessed after the card may be freed. | ||||
| CVE-2026-31578 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: as102: fix to not free memory after the device is registered in as102_usb_probe() In as102_usb driver, the following race condition occurs: ``` CPU0 CPU1 as102_usb_probe() kzalloc(); // alloc as102_dev_t .... usb_register_dev(); fd = sys_open("/path/to/dev"); // open as102 fd .... usb_deregister_dev(); .... kfree(); // free as102_dev_t .... sys_close(fd); as102_release() // UAF!! as102_usb_release() kfree(); // DFB!! ``` When a USB character device registered with usb_register_dev() is later unregistered (via usb_deregister_dev() or disconnect), the device node is removed so new open() calls fail. However, file descriptors that are already open do not go away immediately: they remain valid until the last reference is dropped and the driver's .release() is invoked. In as102, as102_usb_probe() calls usb_register_dev() and then, on an error path, does usb_deregister_dev() and frees as102_dev_t right away. If userspace raced a successful open() before the deregistration, that open FD will later hit as102_release() --> as102_usb_release() and access or free as102_dev_t again, occur a race to use-after-free and double-free vuln. The fix is to never kfree(as102_dev_t) directly once usb_register_dev() has succeeded. After deregistration, defer freeing memory to .release(). In other words, let release() perform the last kfree when the final open FD is closed. | ||||
| CVE-2026-31576 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix to not free memory after the device is registered in hackrf_probe() In hackrf driver, the following race condition occurs: ``` CPU0 CPU1 hackrf_probe() kzalloc(); // alloc hackrf_dev .... v4l2_device_register(); .... fd = sys_open("/path/to/dev"); // open hackrf fd .... v4l2_device_unregister(); .... kfree(); // free hackrf_dev .... sys_ioctl(fd, ...); v4l2_ioctl(); video_is_registered() // UAF!! .... sys_close(fd); v4l2_release() // UAF!! hackrf_video_release() kfree(); // DFB!! ``` When a V4L2 or video device is unregistered, the device node is removed so new open() calls are blocked. However, file descriptors that are already open-and any in-flight I/O-do not terminate immediately; they remain valid until the last reference is dropped and the driver's release() is invoked. Therefore, freeing device memory on the error path after hackrf_probe() has registered dev it will lead to a race to use-after-free vuln, since those already-open handles haven't been released yet. And since release() free memory too, race to use-after-free and double-free vuln occur. To prevent this, if device is registered from probe(), it should be modified to free memory only through release() rather than calling kfree() directly. | ||||
| CVE-2026-31527 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: driver core: platform: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] | ||||
| CVE-2025-38627 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic The decompress_io_ctx may be released asynchronously after I/O completion. If this file is deleted immediately after read, and the kworker of processing post_read_wq has not been executed yet due to high workloads, It is possible that the inode(f2fs_inode_info) is evicted and freed before it is used f2fs_free_dic. The UAF case as below: Thread A Thread B - f2fs_decompress_end_io - f2fs_put_dic - queue_work add free_dic work to post_read_wq - do_unlink - iput - evict - call_rcu This file is deleted after read. Thread C kworker to process post_read_wq - rcu_do_batch - f2fs_free_inode - kmem_cache_free inode is freed by rcu - process_scheduled_works - f2fs_late_free_dic - f2fs_free_dic - f2fs_release_decomp_mem read (dic->inode)->i_compress_algorithm This patch store compress_algorithm and sbi in dic to avoid inode UAF. In addition, the previous solution is deprecated in [1] may cause system hang. [1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org | ||||
| CVE-2025-21739 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix use-after free in init error and remove paths devm_blk_crypto_profile_init() registers a cleanup handler to run when the associated (platform-) device is being released. For UFS, the crypto private data and pointers are stored as part of the ufs_hba's data structure 'struct ufs_hba::crypto_profile'. This structure is allocated as part of the underlying ufshcd and therefore Scsi_host allocation. During driver release or during error handling in ufshcd_pltfrm_init(), this structure is released as part of ufshcd_dealloc_host() before the (platform-) device associated with the crypto call above is released. Once this device is released, the crypto cleanup code will run, using the just-released 'struct ufs_hba::crypto_profile'. This causes a use-after-free situation: Call trace: kfree+0x60/0x2d8 (P) kvfree+0x44/0x60 blk_crypto_profile_destroy_callback+0x28/0x70 devm_action_release+0x1c/0x30 release_nodes+0x6c/0x108 devres_release_all+0x98/0x100 device_unbind_cleanup+0x20/0x70 really_probe+0x218/0x2d0 In other words, the initialisation code flow is: platform-device probe ufshcd_pltfrm_init() ufshcd_alloc_host() scsi_host_alloc() allocation of struct ufs_hba creation of scsi-host devices devm_blk_crypto_profile_init() devm registration of cleanup handler using platform-device and during error handling of ufshcd_pltfrm_init() or during driver removal: ufshcd_dealloc_host() scsi_host_put() put_device(scsi-host) release of struct ufs_hba put_device(platform-device) crypto cleanup handler To fix this use-after free, change ufshcd_alloc_host() to register a devres action to automatically cleanup the underlying SCSI device on ufshcd destruction, without requiring explicit calls to ufshcd_dealloc_host(). This way: * the crypto profile and all other ufs_hba-owned resources are destroyed before SCSI (as they've been registered after) * a memleak is plugged in tc-dwc-g210-pci.c remove() as a side-effect * EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as it's not needed anymore * no future drivers using ufshcd_alloc_host() could ever forget adding the cleanup | ||||
| CVE-2024-53213 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Fix double free issue with interrupt buffer allocation In lan78xx_probe(), the buffer `buf` was being freed twice: once implicitly through `usb_free_urb(dev->urb_intr)` with the `URB_FREE_BUFFER` flag and again explicitly by `kfree(buf)`. This caused a double free issue. To resolve this, reordered `kmalloc()` and `usb_alloc_urb()` calls to simplify the initialization sequence and removed the redundant `kfree(buf)`. Now, `buf` is allocated after `usb_alloc_urb()`, ensuring it is correctly managed by `usb_fill_int_urb()` and freed by `usb_free_urb()` as intended. | ||||
| CVE-2024-50012 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: Avoid a bad reference count on CPU node In the parse_perf_domain function, if the call to of_parse_phandle_with_args returns an error, then the reference to the CPU device node that was acquired at the start of the function would not be properly decremented. Address this by declaring the variable with the __free(device_node) cleanup attribute. | ||||
| CVE-2024-26886 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-06-01 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: af_bluetooth: Fix deadlock Attemting to do sock_lock on .recvmsg may cause a deadlock as shown bellow, so instead of using sock_sock this uses sk_receive_queue.lock on bt_sock_ioctl to avoid the UAF: INFO: task kworker/u9:1:121 blocked for more than 30 seconds. Not tainted 6.7.6-lemon #183 Workqueue: hci0 hci_rx_work Call Trace: <TASK> __schedule+0x37d/0xa00 schedule+0x32/0xe0 __lock_sock+0x68/0xa0 ? __pfx_autoremove_wake_function+0x10/0x10 lock_sock_nested+0x43/0x50 l2cap_sock_recv_cb+0x21/0xa0 l2cap_recv_frame+0x55b/0x30a0 ? psi_task_switch+0xeb/0x270 ? finish_task_switch.isra.0+0x93/0x2a0 hci_rx_work+0x33a/0x3f0 process_one_work+0x13a/0x2f0 worker_thread+0x2f0/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe0/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> | ||||
| CVE-2023-53596 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drivers: base: Free devm resources when unregistering a device In the current code, devres_release_all() only gets called if the device has a bus and has been probed. This leads to issues when using bus-less or driver-less devices where the device might never get freed if a managed resource holds a reference to the device. This is happening in the DRM framework for example. We should thus call devres_release_all() in the device_del() function to make sure that the device-managed actions are properly executed when the device is unregistered, even if it has neither a bus nor a driver. This is effectively the same change than commit 2f8d16a996da ("devres: release resources on device_del()") that got reverted by commit a525a3ddeaca ("driver core: free devres in device_release") over memory leaks concerns. This patch effectively combines the two commits mentioned above to release the resources both on device_del() and device_release() and get the best of both worlds. | ||||
| CVE-2022-50552 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: use quiesced elevator switch when reinitializing queues The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below). Use the quiesced elevator switch instead, and make the previous one static since it is now only used locally. nvme nvme0: resetting controller nvme nvme0: 32/0/0 default/read/poll queues BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0 Oops: 0000 [#1] SMP PTI Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:kyber_has_work+0x29/0x70 ... Call Trace: __blk_mq_do_dispatch_sched+0x83/0x2b0 __blk_mq_sched_dispatch_requests+0x12e/0x170 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x2b/0x50 process_one_work+0x1ef/0x380 worker_thread+0x2d/0x3e0 | ||||
| CVE-2026-10003 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-01 | 7.5 High |
| Use after free in Views in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-10007 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-01 | 8.8 High |
| Use after free in SVG in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-9970 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-01 | 8.3 High |
| Use after free in WebGL in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-10016 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-01 | 8.8 High |
| Use after free in DOM in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-45324 | 1 Rizin | 1 Rizin | 2026-05-30 | 3.3 Low |
| Rizin is a UNIX-like reverse engineering framework and command-line toolset. There is a double free in librz/core/cmd/cmd_search.c:byte_pattern_search() due wrong pointer ownership declared. This vulnerability is fixed by commit 045fff363b42b8a6dda8ad5229c29ec3267e7dbe. | ||||