Export limit exceeded: 36348 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36348 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31550 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: bcm: bcm2835-power: Increase ASB control timeout The bcm2835_asb_control() function uses a tight polling loop to wait for the ASB bridge to acknowledge a request. During intensive workloads, this handshake intermittently fails for V3D's master ASB on BCM2711, resulting in "Failed to disable ASB master for v3d" errors during runtime PM suspend. As a consequence, the failed power-off leaves V3D in a broken state, leading to bus faults or system hangs on later accesses. As the timeout is insufficient in some scenarios, increase the polling timeout from 1us to 5us, which is still negligible in the context of a power domain transition. Also, replace the open-coded ktime_get_ns()/ cpu_relax() polling loop with readl_poll_timeout_atomic(). | ||||
| CVE-2026-31553 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc() Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2 descriptors looks really wrong, if offset is not zero. What we want to get for swapping is hva + offset, not hva + offset*8. ;-) Fix it. | ||||
| CVE-2026-31556 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: scrub: unlock dquot before early return in quota scrub xchk_quota_item can return early after calling xchk_fblock_process_error. When that helper returns false, the function returned immediately without dropping dq->q_qlock, which can leave the dquot lock held and risk lock leaks or deadlocks in later quota operations. Fix this by unlocking dq->q_qlock before the early return. | ||||
| CVE-2026-41988 | 1 Uuidjs | 1 Uuid | 2026-04-27 | 3.2 Low |
| uuid before 14.0.0 can make unexpected writes when external output buffers are used, and the UUID version is 3, 5, or 6. In particular, UUID version 4, which is very commonly used, is unaffected by this issue. | ||||
| CVE-2025-52634 | 1 Hcltech | 1 Aion | 2026-04-27 | 3.7 Low |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in HCL AION This issue affects HCL AION: 2.0. | ||||
| CVE-2025-52630 | 1 Hcltech | 1 Aion | 2026-04-27 | 3.7 Low |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in HCL AION.This issue affects AION: 2.0. | ||||
| CVE-2025-52635 | 1 Hcltech | 1 Aion | 2026-04-27 | 3.7 Low |
| A rusted types in scripts not enforced in CSP vulnerability has been identified in HCL AION.This issue affects AION: 2.0. | ||||
| CVE-2026-40885 | 2 Goshs, Patrickhener | 2 Goshs, Goshs | 2026-04-27 | 8.8 High |
| goshs is a SimpleHTTPServer written in Go. From 2.0.0-beta.4 to 2.0.0-beta.5, goshs leaks file-based ACL credentials through its public collaborator feed when the server is deployed without global basic auth. Requests to .goshs-protected folders are logged before authorization is enforced, and the collaborator websocket broadcasts raw request headers, including Authorization. An unauthenticated observer can capture a victim's folder-specific basic-auth header and replay it to read, upload, overwrite, and delete files inside the protected subtree. This vulnerability is fixed in 2.0.0-beta.6. | ||||
| CVE-2026-23429 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Fix crash in iommu_sva_unbind_device() domain->mm->iommu_mm can be freed by iommu_domain_free(): iommu_domain_free() mmdrop() __mmdrop() mm_pasid_drop() After iommu_domain_free() returns, accessing domain->mm->iommu_mm may dereference a freed mm structure, leading to a crash. Fix this by moving the code that accesses domain->mm->iommu_mm to before the call to iommu_domain_free(). | ||||
| CVE-2026-23425 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix ID register initialization for non-protected pKVM guests In protected mode, the hypervisor maintains a separate instance of the `kvm` structure for each VM. For non-protected VMs, this structure is initialized from the host's `kvm` state. Currently, `pkvm_init_features_from_host()` copies the `KVM_ARCH_FLAG_ID_REGS_INITIALIZED` flag from the host without the underlying `id_regs` data being initialized. This results in the hypervisor seeing the flag as set while the ID registers remain zeroed. Consequently, `kvm_has_feat()` checks at EL2 fail (return 0) for non-protected VMs. This breaks logic that relies on feature detection, such as `ctxt_has_tcrx()` for TCR2_EL1 support. As a result, certain system registers (e.g., TCR2_EL1, PIR_EL1, POR_EL1) are not saved/restored during the world switch, which could lead to state corruption. Fix this by explicitly copying the ID registers from the host `kvm` to the hypervisor `kvm` for non-protected VMs during initialization, since we trust the host with its non-protected guests' features. Also ensure `KVM_ARCH_FLAG_ID_REGS_INITIALIZED` is cleared initially in `pkvm_init_features_from_host` so that `vm_copy_id_regs` can properly initialize them and set the flag once done. | ||||
| CVE-2026-23424 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Validate command buffer payload count The count field in the command header is used to determine the valid payload size. Verify that the valid payload does not exceed the remaining buffer space. | ||||
| CVE-2026-22988 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: arp: do not assume dev_hard_header() does not change skb->head arp_create() is the only dev_hard_header() caller making assumption about skb->head being unchanged. A recent commit broke this assumption. Initialize @arp pointer after dev_hard_header() call. | ||||
| CVE-2025-22125 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: don't ignore IO flags If blk-wbt is enabled by default, it's found that raid write performance is quite bad because all IO are throttled by wbt of underlying disks, due to flag REQ_IDLE is ignored. And turns out this behaviour exist since blk-wbt is introduced. Other than REQ_IDLE, other flags should not be ignored as well, for example REQ_META can be set for filesystems, clearing it can cause priority reverse problems; And REQ_NOWAIT should not be cleared as well, because io will wait instead of failing directly in underlying disks. Fix those problems by keep IO flags from master bio. Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT") | ||||
| CVE-2023-4658 | 1 Gitlab | 1 Gitlab | 2026-04-26 | 3.1 Low |
| An issue has been discovered in GitLab EE affecting all versions starting from 8.13 before 16.4.3, all versions starting from 16.5 before 16.5.3, all versions starting from 16.6 before 16.6.1. It was possible for an attacker to abuse the `Allowed to merge` permission as a guest user, when granted the permission through a group. | ||||
| CVE-2023-4532 | 1 Gitlab | 1 Gitlab | 2026-04-26 | 4.3 Medium |
| An issue has been discovered in GitLab affecting all versions starting from 16.2 before 16.2.8, all versions starting from 16.3 before 16.3.5, all versions starting from 16.4 before 16.4.1. Users were capable of linking CI/CD jobs of private projects which they are not a member of. | ||||
| CVE-2024-57726 | 1 Simple-help | 1 Simplehelp | 2026-04-25 | 9.9 Critical |
| SimpleHelp remote support software v5.5.7 and before has a vulnerability that allows low-privileges technicians to create API keys with excessive permissions. These API keys can be used to escalate privileges to the server admin role. | ||||
| CVE-2025-65104 | 1 Firebirdsql | 1 Firebird | 2026-04-24 | 7.9 High |
| Firebird is an open-source relational database management system. In versions FB3 of the client library placed incorrect data length values into XSQLDA fields when communicating with FB4 or higher servers, resulting in an information leak. This issue is fixed by upgrading to the FB4 client or higher. | ||||
| CVE-2026-33432 | 1 Roxy-wi | 1 Roxy-wi | 2026-04-24 | 9.1 Critical |
| Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. In versions up to and including 8.2.8.2, when LDAP authentication is enabled, Roxy-WI constructs an LDAP search filter by directly concatenating the user-supplied login username into the filter string without escaping LDAP special characters. An unauthenticated attacker can inject LDAP filter metacharacters into the username field to manipulate the search query, cause the directory to return an unintended user entry, and bypass authentication entirely — gaining access to the application without knowing any valid password. As of time of publication, no known patches are available. | ||||
| CVE-2026-23355 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata: cancel pending work after clearing deferred_qc Syzbot reported a WARN_ON() in ata_scsi_deferred_qc_work(), caused by ap->ops->qc_defer() returning non-zero before issuing the deferred qc. ata_scsi_schedule_deferred_qc() is called during each command completion. This function will check if there is a deferred QC, and if ap->ops->qc_defer() returns zero, meaning that it is possible to queue the deferred qc at this time (without being deferred), then it will queue the work which will issue the deferred qc. Once the work get to run, which can potentially be a very long time after the work was scheduled, there is a WARN_ON() if ap->ops->qc_defer() returns non-zero. While we hold the ap->lock both when assigning and clearing deferred_qc, and the work itself holds the ap->lock, the code currently does not cancel the work after clearing the deferred qc. This means that the following scenario can happen: 1) One or several NCQ commands are queued. 2) A non-NCQ command is queued, gets stored in ap->deferred_qc. 3) Last NCQ command gets completed, work is queued to issue the deferred qc. 4) Timeout or error happens, ap->deferred_qc is cleared. The queued work is currently NOT canceled. 5) Port is reset. 6) One or several NCQ commands are queued. 7) A non-NCQ command is queued, gets stored in ap->deferred_qc. 8) Work is finally run. Yet at this time, there is still NCQ commands in flight. The work in 8) really belongs to the non-NCQ command in 2), not to the non-NCQ command in 7). The reason why the work is executed when it is not supposed to, is because it was never canceled when ap->deferred_qc was cleared in 4). Thus, ensure that we always cancel the work after clearing ap->deferred_qc. Another potential fix would have been to let ata_scsi_deferred_qc_work() do nothing if ap->ops->qc_defer() returns non-zero. However, canceling the work when clearing ap->deferred_qc seems slightly more logical, as we hold the ap->lock when clearing ap->deferred_qc, so we know that the work cannot be holding the lock. (The function could be waiting for the lock, but that is okay since it will do nothing if ap->deferred_qc is not set.) | ||||
| CVE-2026-23386 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA buffer cleanup path. It iterates num_bufs times and attempts to unmap entries in the dma array. This leads to two issues: 1. The dma array shares storage with tx_qpl_buf_ids (union). Interpreting buffer IDs as DMA addresses results in attempting to unmap incorrect memory locations. 2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed the size of the dma array, causing out-of-bounds access warnings (trace below is how we noticed this issue). UBSAN: array-index-out-of-bounds in drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]') Workqueue: gve gve_service_task [gve] Call Trace: <TASK> dump_stack_lvl+0x33/0xa0 __ubsan_handle_out_of_bounds+0xdc/0x110 gve_tx_stop_ring_dqo+0x182/0x200 [gve] gve_close+0x1be/0x450 [gve] gve_reset+0x99/0x120 [gve] gve_service_task+0x61/0x100 [gve] process_scheduled_works+0x1e9/0x380 Fix this by properly checking for QPL mode and delegating to gve_free_tx_qpl_bufs() to reclaim the buffers. | ||||