Export limit exceeded: 25326 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25326 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93224 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix unmatched rn_unregister on failed accept When svc_rdma_accept() takes the errout path before rpcrdma_rn_register() has succeeded, the existing cleanup block calls rpcrdma_rn_unregister(dev, &newxprt->sc_rn) unconditionally. svcxprt_rdma is kzalloc'd, so on that path sc_rn.rn_index is 0 and sc_rn.rn_done is NULL; the unregister therefore xa_erase()s another caller's slot 0 and performs an unmatched kref_put() on the rpcrdma_device's rd_kref. The same errout also brackets the cleanup with svc_xprt_get()/ svc_xprt_put() around the kref_init() birth reference. The kref goes 1 -> 2 -> 1 and never reaches 0, so the svcxprt_rdma (and the net/ns_tracker it pinned) is leaked on every failed accept. rpcrdma_rn_register() writes rn->rn_done last, only after xa_alloc() and kref_get() have both succeeded, so rn_done == NULL is a natural "never registered" sentinel. Guard rpcrdma_rn_unregister() with an early return when rn_done is NULL, and clear rn_done before the matching xa_erase() so a repeated unregister is also a no-op. With that guard in place, the accept errout drops the kref_init() birth reference via svc_xprt_put(), which dispatches svc_rdma_free(). Teardown of sc_qp, sc_sq_cq, sc_rq_cq, and sc_pd runs under existing IS_ERR/NULL guards in svc_rdma_free(); sc_rn is covered by the new rn_done sentinel; sc_cm_id is non-NULL on every errout path because svc_rdma_accept() dereferences it above the first goto errout. svc_xprt_free() drops the module reference associated with the freed transport, and svc_handle_xprt() drops its pre-acquired reference when ->xpo_accept() returns NULL. Take a replacement module reference before svc_xprt_put() so the two module_put()s remain balanced. The rn_done guard also covers svc_rdma_free()'s non-listener call to rpcrdma_rn_unregister() for transports whose register attempt failed or never ran. | ||||
| CVE-2026-93230 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: initialize gigantic bootmem hugepage struct pages earlier Gigantic bootmem HugeTLB pages are currently initialized from hugetlb_init(), but page_alloc_init_late() runs earlier and walks pageblocks to determine zone contiguity. If a bootmem HugeTLB region is marked noinit, set_zone_contiguous() can observe still-uninitialized struct pages through __pageblock_pfn_to_page(). This may not trigger an immediate failure, but it can make set_zone_contiguous() compute the wrong zone contiguity state. If extra poisoned-page checks are added in this path, such as PF_POISONED_CHECK() in page_zone_id(), it can also trigger an early boot panic. Initialize gigantic bootmem HugeTLB struct pages from page_alloc_init_late(), before zone contiguity is evaluated, so later page allocator setup only sees valid struct page state. This also makes the initialization order more natural, as struct pages should be initialized before later code inspects them. | ||||
| CVE-2026-93232 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix boot panic with CONFIG_DEBUG_VM and HVO bootmem pages Patch series "mm: Refactor bootmem gigantic hugepage allocation", v4. This series is split out from the earlier larger series "mm: Generalize HVO for HugeTLB and device DAX" [1]. It collects the first 19 patches of that series as a standalone set of fixes and preparatory cleanups around bootmem HugeTLB handling, sparse initialization ordering, and related vmemmap setup. The first patches fix a few bugs found while reviewing the existing code, including incorrect bootmem HVO handling, wrong vmemmap registration arguments, a powerpc compound-vmemmap tracking bug, and too-late initialization of gigantic bootmem HugeTLB struct pages. The rest of the series reorders early memory initialization so the relevant zone state is available before sparse and HugeTLB boot-time setup runs, then simplifies the remaining bootmem gigantic hugepage allocation path and removes code made obsolete by that rework. At a high level: - patches [1-4] fix boot-time and arch-specific bugs - patches [5-12] reorder and simplify sparse/mm/hugetlb early init - patches [13-19] refactor bootmem gigantic hugepage allocation and remove obsolete helpers and state This patch (of 19): Commit 622026e87c40 ("mm/hugetlb: remove fake head pages") switched HVO to reuse per-zone shared tail pages from zone->vmemmap_tails[]. Those shared tail pages were initialized in hugetlb_vmemmap_init(), but bootmem HugeTLB folios are prepared earlier from gather_bootmem_prealloc(). With hugetlb_free_vmemmap=on, prep_and_add_bootmem_folios() can access pageblock flags on bootmem HugeTLB pages whose mirrored tail struct pages already point to the shared tail page. On CONFIG_DEBUG_VM kernels, get_pfnblock_bitmap_bitidx() then dereferences the still-uninitialized shared tail page and can panic during boot. Initialize zone->vmemmap_tails[] from gather_bootmem_prealloc(), before bootmem HugeTLB folios are processed, and drop the later initialization from hugetlb_vmemmap_init(). This bug only affects CONFIG_DEBUG_VM kernels, where the relevant assertion is evaluated. | ||||
| CVE-2026-93236 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: meson: vdec: fix NULL pointer deref in vdec_try_fmt_common When VIDIOC_TRY_FMT is called with an unsupported pixel format on the OUTPUT queue, vdec_try_fmt_common() falls back to V4L2_PIX_FMT_MPEG2. However, if a distro has locally patched MPEG2 support out (as it has been broken for some time) the platform format table does not contain MPEG2 so find_format() returns NULL and the subsequent dereference of fmt_out->max_width triggers a NULL pointer dereference. Fix this by falling back to the first format in the platform's format array instead of hardcoding V4L2_PIX_FMT_MPEG2. This is always valid since every platform defines at least one format. | ||||
| CVE-2026-93254 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit Currently, when exiting to kernel mode, we attempt involuntary preemption. The preemption logic expects IRQs to be disabled, which is why we call local_irq_disable() before attempting preemption. However, depending on the context, local_irq_disable() may be unnecessary: - __el1_irq(), the non-NMI EL1 IRQ path, already has IRQs disabled, so local_irq_disable() is redundant. - irqentry_exit_to_kernel_mode_preempt() immediately returns when exiting from an NMI-like context, so calling local_irq_disable() beforehand is unnecessary work. Furthermore, it confuses the pNMI state tracking when we are in a context with interrupts disabled and the GIC_PRIO_PSR_I_SET bit is set in the PMR, leading to a warning when CONFIG_ARM64_DEBUG_PRIORITY_MASKING=y: WARNING: ./arch/arm64/include/asm/irqflags.h:63 at arm64_exit_to_kernel_mode+0xb8/0xc0, CPU#40: retsnoop/31805 CPU: 40 UID: 0 PID: 31805 Comm: retsnoop Not tainted 7.2.0-rc6-next-20260805 #7 PREEMPTLAZY pstate: 234013c9 (nzCv DAIF +PAN -UAO +TCO +DIT +SSBS BTYPE=--) pc : arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63) lr : el1_abort (arch/arm64/kernel/entry-common.c:323) pmr: 000000f0 Call trace: arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63) (P) el1_abort (arch/arm64/kernel/entry-common.c:323) el1h_64_sync_handler (arch/arm64/kernel/entry-common.c:449) el1h_64_sync (arch/arm64/kernel/entry.S:589) [...] Split arm64_exit_to_kernel_mode() into preempt, non-preempt, and dispatch parts so that we can avoid this extra work where it is not needed and avoid breaking the pNMI tracking logic. | ||||
| CVE-2026-93262 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5-ppl: fix use-after-free in ppl_do_flush() The loop in ppl_do_flush() continues iterating after calling ppl_io_unit_finished(), touching io->pending_flushes and leading to a use-after-free. Add a break statement to stop the loop once io is freed. | ||||
| CVE-2026-93205 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Manage teardown with devm arm_smmu_device_remove() manually frees the IOPF queue, destroys the vmid_map and disables the device, while the IRQs and queues are devm managed. devm unwinds only after remove() returns, so the cleanup runs in the wrong order. The IOPF queue is freed before the event-queue IRQ whose handler uses it. Manage all of it with devm so the unwind order is correct. Free the IOPF queue and vmid_map via devm actions, and disable the device from one registered after arm_smmu_device_reset(). This is also a prerequisite for fixing a Tegra241 CMDQV CMD_SYNC use-after-free in the subsequent patch. | ||||
| CVE-2026-93211 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: initialize DRC hash table before registering shrinker shrinker_register() precedes the INIT_LIST_HEAD loop and the drc_hashsize store. On weakly-ordered architectures (arm64, ppc), a shrinker scan can observe drc_hashsize before the bucket list heads are initialized, causing a NULL deref in the DRC shrinker callback. Move bucket initialization and the drc_hashsize store before shrinker_register() so the hash table is fully initialized before it becomes visible to the shrinker. | ||||
| CVE-2026-93212 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: guard nfsd_serv deref in nfsd_file_net_dispose nfsd_file_net_dispose() is the consumer side of l->freeme: the nfsd service thread loop calls it to drain entries that the filecache garbage collector and shrinker append via nfsd_file_dispose_list_delayed(). During per-net teardown, nn->nfsd_serv is cleared before the filecache laundrette is shut down, so the service thread can still run a dispose pass that finds more than eight entries on l->freeme and dereferences a NULL svc_serv: nfsd service thread loop nfsd_file_net_dispose(nn) if (!list_empty(&l->freeme)) { ... svc_wake_up(nn->nfsd_serv); /* nn->nfsd_serv == NULL */ } The sibling helper nfsd_file_dispose_list_delayed() already documents this ordering and caches nn->nfsd_serv into a local before testing it for NULL. nfsd_file_net_dispose() was introduced with the same raw svc_wake_up(nn->nfsd_serv) call and never picked up the guard. Fix by loading nn->nfsd_serv into a local svc_serv pointer and only calling svc_wake_up() when it is non-NULL, matching the pattern in nfsd_file_dispose_list_delayed(). | ||||
| CVE-2026-93214 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: fix deadlock in usbg_make_tpg() usbg_make_tpg() held dep_lock while calling configfs_depend_item_unlocked(), which acquires the configfs root inode lock when operating across subsystems. This creates a circular lock dependency with configfs_rmdir(): dep_lock -> configfs root inode lock -> su_mutex -> dep_lock In usbg_make_tpg(), dep_lock only serialized the read of opts->ready, which is a monotonic flag that transitions from false to true exactly once (in tcm_set_name()) and never reverts. Remove dep_lock from usbg_make_tpg() entirely and use READ_ONCE/WRITE_ONCE to access opts->ready locklessly instead. | ||||
| CVE-2026-93217 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/madvise: skip device-private PMDs in cold and pageout walks madvise_cold_or_pageout_pte_range() takes pmd_trans_huge_lock(), whose pmd_is_huge() check returns true for a device-private PMD. The subsequent !pmd_present() branch has a VM_BUG_ON() asserting migration is the only allowed non-present case; a device-private PMD trips it. Skip device-private PMDs in that non-present branch and continue to huge_unlock before calling pmd_folio(). Downgrade the check to VM_WARN_ON_ONCE() so an unexpected PMD softleaf logs a warning rather than panicking. Drop the thp_migration_supported() guard: it expands to IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both pmd_is_migration_entry() and pmd_is_device_private_entry() already return false when that config is not selected, so the guard suppresses only the case where the warning would already be silent. Potential trigger: an HMM-based GPU driver races with madvise(MADV_COLD)/MADV_PAGEOUT: pmd_trans_huge(*pmd) reads true, then migrate_vma_pages() flips the PMD to a device-private entry before the PMD lock is acquired. | ||||
| CVE-2026-93233 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: fix callocated underflow on large folio split nouveau_dmem_folio_free() drops chunk->callocated once per freed folio, while a large (compound) device-private folio is only counted once when it is allocated. When such a folio is split, the mm core invokes ->folio_split() (nouveau_dmem_folio_split()) once for each new sub-folio, but the hook only fixes up the sub-folio metadata and leaves chunk->callocated unchanged. Each resulting sub-folio is later freed separately, so after a split the single allocation (+1) is met by N frees (-N), leaving chunk->callocated short by N-1. On the first split/free cycle it underflows: WARN_ON(!chunk->callocated) fires, the unsigned counter wraps and never returns to zero, so the chunk can no longer be reclaimed (nouveau_dmem_fini() also warns on the leaked count). Account for the new sub-folio in the split hook, under the same lock as nouveau_dmem_folio_free(), so the count stays balanced. | ||||
| CVE-2026-93235 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to zero post-EOF data when extending file size generic/794 4s ... - output mismatch (see /share/git/fstests/results//generic/794.out.bad) --- tests/generic/794.out 2026-06-12 08:46:32.766426241 +0800 +++ /share/git/fstests/results//generic/794.out.bad 2026-07-05 18:32:55.000000000 +0800 @@ -1,4 +1,16 @@ QA output created by 794 append_write +FAIL: non-zero data in gap [4080,4096) after shutdown+remount +000000 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a >ZZZZZZZZZZZZZZZZ< +* +001000 truncate_up ... (Run 'diff -u /share/git/fstests/tests/generic/794.out /share/git/fstests/results//generic/794.out.bad' to see the entire diff) Ran: generic/794 Failures: generic/794 Failed 1 of 1 tests Steps of generic/794: 1. write 4096 bytes to file w/ 0x5a 2. use fiemap to get PBA of first block in file 3. truncate file to 4080 4. umount; write 4096 bytes to file w/ 0x5a directly via PBA; mount 5. extend filesize via a) append 4096 from offset 4096, or b) truncate 8192, or c) fallocate 4096 from offset 4096 6. verify the gap is zeroed in memory [4080,4096) 7. sync range 4096 from offset 4096; shutdown -f (flush meta before shutdown) 8. umount; mount; verify [4080,4096) is zeroed or not. When extending file size (e.g. via truncate, fallocate, or write) across an unaligned EOF boundary, we need to ensure that post-EOF data in the partial page is zeroed out in pagecache and marked dirty, then writeback the cache to persist zeroed data before committing inode w/ updated i_size. This help to prevent stale disk data beyond the previous EOF from being exposed after remounting or crash recovery. Since f2fs is a LFS filesystem, we only support direct write via PBA in pinfile, and pinfile has section-aligned filesize, so in Android, there should no problem, but for other usage in different environment, let's fix this w/ fsync_mode=strict mount option. | ||||
| CVE-2026-93241 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memcg: bypass the reclaim and oom killer for dying tasks once oom_reaper is done At Meta, we are seeing instances where an OOM killed job is stuck in the exit path for several hours. In one particular case, the job was stuck for more than 8 hours and I had to manually remove the memory.max limits to allow the process to exit. The job was a single process job and had ~55 GiB memory.max and zswap enabled. It had almost 0 anon in memory and ~111 GiB in zswap compressed to ~51 GiB zswap pool (i.e. almost all of memory.current was zswap). Nothing was left on the LRUs to reclaim. On further inspection, I observed ~20k threads of that process stuck with the following stack: [<0>] mem_cgroup_out_of_memory+0x4e/0xa0 [<0>] charge_memcg+0x8bf/0x990 [<0>] mem_cgroup_swapin_charge_folio+0x4e/0x80 [<0>] __read_swap_cache_async+0x10c/0x260 [<0>] swapin_readahead+0x116/0x3f0 [<0>] do_swap_page+0x13c/0x1ce0 [<0>] handle_mm_fault+0x61d/0x11f0 [<0>] do_user_addr_fault+0x3e7/0x6d0 [<0>] exc_page_fault+0x8f/0x110 [<0>] asm_exc_page_fault+0x22/0x30 [<0>] __get_user_8+0x14/0x20 [<0>] futex_cleanup+0x27/0x1c0 [<0>] futex_exit_release+0x47/0x60 [<0>] do_exit+0x107/0x940 [<0>] do_group_exit+0x81/0xa0 [<0>] get_signal+0x2b1/0x6e0 [<0>] arch_do_signal_or_restart+0x1a/0x1c0 [<0>] exit_to_user_mode_loop+0xa8/0x1c0 [<0>] do_syscall_64+0x152/0x250 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 In addition the dmesg was filled with "Out of memory and no killable processes..." messages. I have no idea why oom reaper was not able to reap/unmap the process. My guess is that since oom reaper tries to acquire mmap_lock in read mode limited number of times and then gives up, there might be a thread of that process which had mmap_lock in write mode at that time. My initial suspicion was the futex_cleanup and kernel page fault causing infinite fault and charge retries but that was put to rest in previous discussions happened on similar problem [1]. My current theory is that it is just a simple slow serialization behind the oom_lock. Unlike page allocator, memcg charge code takes the oom_lock without the "try". Though memcg oom code uses mutex_lock_killable(), note that in the call stack get_signal() consumes SIGKILL (or sigdelset(SIGKILL)) before calling do_group_exit(). So this mutex_lock_killable() is just a mutex_lock() here. Therefore 10s of thousands of threads are waiting on oom_lock and one by one they get -EFAULT from get_user() in the futex cleanup code and bails out. Discussion from [1] led to commit a75ffa26122b ("memcg, oom: do not bypass oom killer for dying tasks") which routes dying tasks into the OOM path precisely so the oom_reaper can reap their mm and free the memory asynchronously. But the reaper is best-effort and one-shot: if it cannot take mmap_lock for read (e.g. a sibling thread holds it for write) it sets MMF_OOM_SKIP and never retries, leaving only the glacial oom_lock-serialized synchronous drain. Once MMF_OOM_SKIP is set there is no more asynchronous reclaim coming for the mm, so a dying task charging against it has nothing left to wait for: it frees its memory only once it finishes exiting. Running reclaim and the (no-victim) OOM killer for it is then pointless, and doing it for 10s of thousands of exiting threads is what serializes them behind oom_lock. So before reclaim, if current is an OOM victim whose reaper is done, fail the charge. Reproduced with 20k threads, each parking a robust futex head on its own zswapped page, OOM-group-killed while a sibling holds mmap_lock for write so the reaper gives up and sets MMF_OOM_SKIP. Tested on next-20260728 and baseline show ~90 seconds exit time while with the patch the exit time reduced to ~3 seconds. | ||||
| CVE-2026-93242 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb() qla24xx_process_response_queue() advances ring_ptr past the head IOCB before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr already points at the first continuation IOCB. The function however looped purex->entry_count times starting at ring_ptr. As entry_count includes the head, this consumed one entry too many: it stamped RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring past it, silently dropping a legitimate firmware response. The head IOCB's signature was also never marked. Mark the head processed and account for it, then consume only the entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer(). | ||||
| CVE-2026-93256 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: mask DAIF before restoring hibernated kernel The arm64 hibernate code manages the exception masking in an unsound way, leading to potential crashes and/or warnings during resume. When a hibernation image is saved in `swsusp_arch_suspend()`, all DAIF exceptions are masked (by virtue of `local_daif_save()`), and the suspended image is saved assuming that all DAIF exceptions will remain masked when the image is restored. When a hibernation image is resumed by `swsusp_arch_resume()`, only interrupts are masked (by virtue of `local_irq_disable()` in `resume_target_kernel()`). When pseudo-NMI is enabled the DAIF.IF bits will be clear, and regardless of pseudo-NMI the DAIF.DA bits will be clear. This means that there are two problems: (1) It is possible to take Debug, SError, or pseudo-NMI exceptions during the resume process. This is unsafe, as during the resume process both the old ane new kernels will tranisently be in an inconsistent state, and swsusp_arch_suspend_exit() won't retain an executable mapping of any exception vectors. Any exception taken here will be fatal and silent. (2) When re-entering the resumed kernel, some DAIF bits will be clear unexpectedly. This permits Debug, SError, or pseudo-NMI exceptions to be taken for a short period while the resumed kernel is not yet in a consistent state. This is detected by CONFIG_ARM64_DEBUG_PRIORITY_MASKING. Avoid these issues by masking all DAIF exceptions during resume. | ||||
| CVE-2026-93219 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/timer-sun4i: Advertise a real minimum delta sun4i_clkevt_next_event() compensates for the timer stop/start synchronization delay by programming evt - TIMER_SYNC_TICKS into the hardware interval register. The clockevent device currently advertises TIMER_SYNC_TICKS as min_delta_ticks, so the clockevents core is allowed to call set_next_event() with evt == TIMER_SYNC_TICKS. That programs a zero-tick interval. With oneshot/highres/nohz timer operation this can leave the next event stuck, which was observed as a boot hang on Allwinner D1 after the clockevents core started reusing forced minimum-delta events. Advertise one extra tick instead, so the smallest event accepted by the core still programs at least one hardware tick after the synchronization compensation. | ||||
| CVE-2026-93223 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: tegra-video: fix of_node_put() on VIP parse errors tegra_vip_channel_of_parse() initializes np from dev->of_node without taking a reference, but its error paths drop one through the err_node_put label. This underflows the refcount of the VIP device's OF node when endpoint parsing fails on a malformed device tree. The only reference the function takes on np is the success-path of_node_get() stored in vip->chan.of_node, and that one is already released by the tegra_vip_init() error path and by tegra_vip_exit(). Return errors directly instead of jumping to the bogus cleanup label. | ||||
| CVE-2026-93226 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU iterator to dump route exceptions rt6_nh_dump_exceptions() uses hlist_for_each_entry() to iterate over RCU-protected exception lists. The caller holds rcu_read_lock(), but does not hold rt6_exception_lock, so rt6_insert_exception() can concurrently add an entry with hlist_add_head_rcu(). KCSAN reports this race (irrelevant details omitted): ================================================================== BUG: KCSAN: data-race in rt6_insert_exception / rt6_nh_dump_exceptions write (marked) to 0xffff8a7c44c59620 of 8 bytes by interrupt on cpu 5: rt6_insert_exception+0x3bb/0x760 __ip6_rt_update_pmtu+0x4fe/0x750 ip6_sk_update_pmtu+0x19a/0x3b0 udpv6_err+0x3ff/0x800 icmpv6_notify+0x1e1/0x440 icmpv6_rcv+0x8c0/0xab0 ip6_protocol_deliver_rcu+0x616/0x840 ip6_input_finish+0xb9/0x160 ... entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff8a7c44c59620 of 8 bytes by task 549 on cpu 14: rt6_nh_dump_exceptions+0xb3/0x260 rt6_dump_route+0x53e/0x5f0 fib6_dump_node+0x6d/0xf0 fib6_walk_continue+0x290/0x2d0 fib6_dump_table+0x28d/0x360 inet6_dump_fib+0x37d/0x620 rtnl_dumpit+0x7b/0xd0 netlink_dump+0x3ae/0x7e0 ... entry_SYSCALL_64_after_hwframe+0x77/0x7f 4 locks held by dumper/549: ... #1: (rcu_read_lock){....}-{1:3}, at: inet6_dump_fib+0x88/0x620 #2: (&tb->tb6_lock){+.-.}-{3:3}, at: fib6_dump_table+0x1e9/0x360 #3: (rcu_read_lock){....}-{1:3}, at: rt6_dump_route+0x483/0x5f0 value changed: 0xffff8a7c44e05700 -> 0xffff8a7c45d60100 Reported by Kernel Concurrency Sanitizer on: CPU: 14 UID: 0 PID: 549 Comm: dumper Not tainted 7.2.0-rc7-virtme #38 PREEMPT(lazy) ... Use hlist_for_each_entry_rcu() to safely iterate over the exception list. | ||||
| CVE-2026-93234 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: validate TV mode names before creating enum property The GUD protocol returns TV mode names as fixed-size GUD_CONNECTOR_TV_MODE_NAME_LEN entries and requires each name to be NUL-terminated. gud_connector_add_tv_mode() currently passes each fixed-size entry directly to drm_mode_create_tv_properties_legacy(), which eventually reaches drm_property_add_enum() and strlen(). If a device returns an entry without a terminating NUL byte, strlen() reads past the end of the slot and can run beyond the allocated buffer, triggering an out-of-bounds read. Validate that each returned TV mode name contains a NUL terminator within its fixed-size slot before passing it to the DRM property code. If a malformed entry is found, reject the device response with -EIO. This fixes the out-of-bounds read without changing the handling of valid devices, and avoids silently truncating malformed protocol data. | ||||