Export limit exceeded: 15798 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15798 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-19570 | 1 Zephyrproject | 1 Zephyr | 2026-10-09 | 8.8 High |
| The LE Audio Broadcast Sink in subsys/bluetooth/audio/bap_broadcast_sink.c copies subgroup metadata from a received Basic Audio Announcement (BASE) into the static Broadcast Audio Scan Service parameter structure mod_src_param without any bounds check. In base_subgroup_meta_cb() the destination element was selected as mod_src_param.subgroups[mod_src_param.num_subgroups] with no test against ARRAY_SIZE(mod_src_param.subgroups) (sized by CONFIG_BT_BAP_BASS_MAX_SUBGROUPS, default 1), and the metadata was copied with memcpy() using the raw on-air length returned by bt_bap_base_get_subgroup_codec_meta() into a metadata array sized by CONFIG_BT_AUDIO_CODEC_CFG_MAX_METADATA_SIZE (default 4). The BASE validator bt_bap_base_get_base_from_ad() only checks structural consistency and permits up to ~24 subgroups and metadata LTVs of ~240 octets. The defect is reached from the periodic advertising receive callback: pa_recv() → bt_data_parse() → pa_decode_base() → update_recv_state_base() → bt_bap_base_foreach_subgroup() → base_subgroup_meta_cb(). Every broadcast sink registers a scan-delegator receive state at creation (bt_bap_broadcast_sink_create() calls broadcast_sink_add_src()), and CONFIG_BT_BAP_BROADCAST_SINK depends on CONFIG_BT_BAP_SCAN_DELEGATOR, so the path is active in every broadcast-sink build once the device is periodic-advertising-synced. An attacker in radio range who operates a broadcast source the device syncs to — or who impersonates the advertiser address and SID of one already in use, periodic advertising data being unauthenticated — can change the BASE at will; each new BASE is re-parsed. A crafted BASE therefore writes attacker-chosen bytes past the end of a fixed static object in .bss: up to roughly 236 bytes for an oversized metadata LTV, plus whole struct bt_bap_bass_subgroup records for each subgroup beyond CONFIG_BT_BAP_BASS_MAX_SUBGROUPS. This is memory corruption of adjacent Bluetooth-audio state reachable with no pairing, bonding or GATT connection, with a potential for remote code execution in the Bluetooth RX thread; in addition, the unvalidated metadata_len is forwarded to bt_bap_scan_delegator_mod_src(), which neither clamps it nor rejects it, leading to a further copy into the receive state and to out-of-bounds memory being disclosed in the BASS receive-state notification sent to a connected Broadcast Assistant. The fix rejects a BASE carrying more subgroups than the receive state can hold (discarding the update entirely) and omits metadata that does not fit rather than copying it, and additionally honours the previously-ignored error return of the subgroup decode pass. | ||||
| CVE-2026-102163 | 1 Arista | 1 Wi-fi Access Points | 2026-10-09 | 8.8 High |
| On affected Arista access points with Wireless Intrusion Prevention System (WIPS) active, an unauthenticated attacker within radio frequency (RF) proximity can send a crafted frame to crash the sensor service, disabling WIPS monitoring on the access point, or potentially achieve remote code execution. No wireless association or authentication is required. | ||||
| CVE-2026-101258 | 2 Ghostscript, Redhat | 2 Ghostscript, Enterprise Linux | 2026-10-09 | 7.8 High |
| A flaw was found in Ghostscript. When Ghostscript renders a crafted PostScript or EPS document, it can bypass the -dSAFER sandbox and execute arbitrary shell commands in the context of the Ghostscript process. The issue chains memory corruption in document parsing with disabling of internal path access controls at runtime. An attacker can deliver the document directly or through formats that delegate rendering to Ghostscript (for example EPS import or print conversion workflows). Successful exploitation can compromise confidentiality, integrity, and availability of data accessible to the process running Ghostscript. | ||||
| CVE-2026-56851 | 1 Golang | 1 Text | 2026-10-09 | 7.5 High |
| The Nickname profile can panic with an out-of-bounds slice error when transforming crafted input into a short destination buffer. | ||||
| CVE-2026-87726 | 1 Nxp | 1 Nxpnfcrdlib | 2026-10-09 | 3.9 Low |
| Insufficient API bounds checking in phalFelica in NXP NXPNfcRdLib RC663 through 07.14.00_Pub may allow an attacker with privileges or an untrusted third party to access unintended memory regions, potentially leading to limited loss of confidentiality, integrity, and availability. All software versions from 07.18.00 onwards have fixed this problem. | ||||
| CVE-2026-25272 | 1 Qualcomm | 1 Snapdragon | 2026-10-09 | 6.7 Medium |
| Memory Corruption when processing camera CRE driver operations with improper handling of buffer limits during hardware update preparation. | ||||
| CVE-2026-103416 | 1 Eclipse | 1 Threadx Netx Duo | 2026-10-09 | N/A |
| Out-of-bounds write via the TLS 1.3 handshake message cache in NetX Duo in Eclipse ThreadX NetX Duo 6.5.1.202602 allows a handshake message larger than the cache writes past it and on into the rest of the session control block, which holds pointers. A malicious or compromised server can make a TLS 1.3 client produce such a message before certificate authentication completes, so no server certificate is needed to reach it. | ||||
| CVE-2026-107909 | 1 Falkordb | 1 Falkordb | 2026-10-09 | 9.1 Critical |
| A heap-based out-of-bounds write in the ws_read_frame function (src/bolt/ws.c) and the buffer_apply_mask function (src/bolt/buffer.c) in FalkorDB before 4.20.0 allows a remote unauthenticated attacker to cause a denial of service and possibly corrupt heap memory by sending a WebSocket frame with a 64-bit extended payload length to the Bolt port. The payload length is not bounded, and the only bounds check in buffer_apply_mask is an ASSERT(), which is compiled out in release builds, so the function XORs memory beyond the end of the receive buffer with the attacker-supplied mask key. Only deployments that enable the Bolt endpoint (BOLT_PORT, disabled by default) are affected. | ||||
| CVE-2026-107908 | 1 Falkordb | 1 Falkordb | 2026-10-09 | 9.8 Critical |
| A heap-based out-of-bounds write in the BoltReadHandler function (src/bolt/bolt_api.c) in FalkorDB before 4.20.0 allows a remote unauthenticated attacker to cause a denial of service and possibly execute arbitrary code by sending a Bolt RESET message with an attacker-chosen chunk size to the Bolt port. The handler checks the size only with ASSERT(), which is compiled out in release builds, then computes a destination pointer from the wire-supplied 16-bit size and moves buffered data up to about 64 KiB backwards past the start of the read buffer. Only deployments that enable the Bolt endpoint (BOLT_PORT, disabled by default) are affected. | ||||
| CVE-2026-14991 | 1 Ibm | 4 Datapower Gateway 1050, Datapower Gateway 1060, Datapower Gateway 106cd and 1 more | 2026-10-09 | 9.8 Critical |
| IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 is vulnerable to a buffer overflow, caused by improper bounds checking. A local user could overflow the buffer and execute arbitrary code on the system. | ||||
| CVE-2026-98184 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: prevent authentication frame length truncation mwifiex_cfg80211_authenticate() derives the authentication frame length from req->ie_len and req->auth_data_len, both of type size_t, but stores it in a u16. NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is a u16, a single attribute can carry up to 65531 bytes of payload, so the sum can exceed U16_MAX before it is assigned to pkt_len. The truncated pkt_len determines the skb frame area, while the copy length remains req->auth_data_len - 4, resulting in a heap buffer overflow. For example, with auth_data_len equal to 65510 and no IEs, the sum is 65546. It is truncated to 10 and then reduced by four to 6. The driver appends only six bytes to the skb with skb_put(), but then copies 65506 user-provided bytes into the authentication body. Reaching this path requires CAP_NET_ADMIN in the user namespace owning the network namespace, an up station netdev, and a suitable BSS/SAE authentication request. Compute the length in size_t, reject values that cannot be represented by the firmware's u16 frame length field, and only then assign it to pkt_len. | ||||
| CVE-2026-98189 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext() wilc_wlan_handle_isr_ext() takes the RX transfer size from the device-reported interrupt status register (a 15-bit field shifted left by 2, up to 131068 bytes) and reads that many bytes from the device into rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap check only handles the current offset; the size itself is never compared against the buffer, so a bogus SDIO device can make the driver OOB-write rx_buffer by up to ~32K with data it controls. The oversized transfer also leaves rx_buffer_offset past the end of the buffer, after which the unsigned wrap check stops working and the overflow can repeat. Drop any transfer whose size exceeds the RX buffer, acknowledging the data interrupt and re-arming the RX engine so the bogus frame is discarded and reception can continue. This also restores the rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check relies on. This is not expected to change driver behavior in most cases: without this check, an oversized transfer would most likely corrupt neighboring kernel memory instead of completing anyway, and the drop path performs the same interrupt acknowledgment and RX engine re-arming as the normal path, so subsequent transfers are received unaffected. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-98365 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() validates that [iova, iova+length) falls within the registered MR range using wraparound-prone arithmetic: if (iova < mr->ibmr.iova || iova + length > mr->ibmr.iova + mr->ibmr.length) A remote peer can craft an RDMA-Write/Read RETH so that iova + length wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the check. rxe_mr_iova_to_index() then computes a huge index (int idx, only guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences mr->page_info[huge], causing an out-of-bounds read/write and a kernel oops that is triggerable by an unauthenticated remote peer. Rewrite the check in overflow-safe form; the first two clauses guarantee that the subsequent subtractions do not underflow: if (iova < mr->ibmr.iova || length > mr->ibmr.length || iova - mr->ibmr.iova > mr->ibmr.length - length) With the fix, mr_check_range() returns -EINVAL for the crafted iova and the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB. | ||||
| CVE-2026-46569 | 1 Tuxera | 1 Ntfs-3g | 2026-10-09 | 7.7 High |
| In NTFS-3G before 2026.7.7, a heap buffer overflow exists in ntfs_ib_copy_tail(), in libntfs-3g/index.c, that allows an attacker to corrupt heap memory in the SUID-root ntfs-3g binary by crafting a malicious NTFS image. The overflow is triggered by extending a directory, e.g., by creating a file. | ||||
| CVE-2026-106115 | 1 Sixlabors | 1 Imagesharp | 2026-10-09 | 7.5 High |
| ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106110 | 1 Sixlabors | 1 Imagesharp | 2026-10-09 | 7.5 High |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, the TIFF CCITT Group 3 encoder allocates an undersized compressed-data buffer for narrow 1-bit images. TiffCcittCompressor.Initialize does not reserve enough space for the row data and T4 end-of-line codes, and T4BitCompressor.CompressStrip reaches unchecked writes when TiffCompression.CcittGroup3Fax is selected directly or inherited from decoded TIFF metadata. An attacker-controlled encode or decode-and-re-encode flow can write beyond the logical output span, corrupt process memory, and terminate the process. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-13732 | 1 Redhat | 4 Cost Management On Premise, Enterprise Linux, Hardened Images and 1 more | 2026-10-09 | 7 High |
| A flaw was found in GDB's STABS debug format parser. The read_member_functions() function in gdb/stabsread.c contains a linked list removal bug in the code that separates destructor and non-destructor member functions of C++ classes. The bug causes the destructor entries to remain in the main function list while the list length counter is decremented, resulting in an out-of-bounds write when the function list is copied to its final allocated array. An attacker can craft an ELF binary with malicious .stab and .stabstr sections that triggers this out-of-bounds write when a user opens the file in GDB and performs any symbol-inspection operation such as setting a breakpoint. The inferior process does not need to be executed. Under controlled conditions, this was demonstrated to achieve execution of arbitrary commands within the GDB process. | ||||
| CVE-2026-42616 | 1 Tuxera | 1 Ntfs-3g | 2026-10-09 | 7.8 High |
| In NTFS-3G before 2026.7.7, a heap buffer overflow exists in cat() in ntfscat.c that allows an attacker to corrupt heap memory in the ntfscat binary by crafting a malicious NTFS image. The overflow is triggered by reading a file. | ||||
| CVE-2026-48864 | 2 Opensuse, Redhat | 23 Libsolv, Cert Manager, Discovery and 20 more | 2026-10-08 | 7.8 High |
| A flaw was found in libsolv. This heap buffer overflow occurs during the decompression of attacker-controlled compressed data within `.solv` files due to insufficient input validation. An attacker can provide a specially crafted `.solv` file, which, when processed by a vulnerable application, can lead to out-of-bounds memory access. This could result in information disclosure, alteration of program execution, or a denial of service. | ||||
| CVE-2026-78701 | 1 Redhat | 2 Directory Server, Enterprise Linux | 2026-10-08 | 6.5 Medium |
| A flaw was found in 389-ds-base. A remote, authenticated attacker could exploit a vulnerability in the Simple Authentication and Security Layer (SASL) UNBIND process. By sending a specially crafted request, the attacker can cause a connection to stall, leading to resource exhaustion and a Denial of Service (DoS) for the server. | ||||