Export limit exceeded: 25262 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25262 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98078 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source first and the unaligned network-order destination second. The version 1 sync sender passes these arguments in reverse for both sequence blocks. This leaves 24 bytes of the kmalloc-backed message unwritten. It may disclose stale heap data and replace the live connection sequence state with values read from the buffer. Pass the connection sequence state as the source and the message payload as the destination for both blocks. | ||||
| CVE-2023-39176 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-08 | 5.8 Medium |
| A flaw was found within the parsing of SMB2 requests that have a transform header in the kernel ksmbd module. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this to disclose sensitive information on affected installations of Linux. Only systems with ksmbd enabled are vulnerable to this CVE. | ||||
| CVE-2026-98131 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix dma mapping leak in stmmac_tso_xmit() In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the frame is dropped but the DMA mappings already created for the linear part and for the fragments mapped before the failure are never unmapped, leaking DMA mappings. Fix the leak by walking back over the descriptors used by the frame and releasing each of them with stmmac_free_tx_buffer(). Moreover, release the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. | ||||
| CVE-2026-98132 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: don't downgrade half-dead scalar zero spills to STACK_ZERO states.c:__clean_func_state() can downgrade scalar zero spill to STACK_ZERO in the following case: *(u64 *)(r10 - 8) = 0; ... checkpoint ... r1 = *(u32 *)(r10 - 4); ... no reads from r10-8 ... Here 4 bytes at r10-8 are dead and verifier changes scalar spill to a combination: 0000pppp (p stands for poison). Such a change breaks precision propagation chains. All places that produce STACK_ZERO should call bpf_mark_chain_precision() for the zero source. This patch fixes the bug in a simplest way possible: avoids converting stack spills of zero to STACK_ZERO. Two smarter approaches are possible: - do bpf_mark_chain_precision() from __clean_func_state() - check slot liveness information in check_stack_write_fixed_off() I investigated both and the changes required are a bit tricky, hence go with a simple fix for the time being. | ||||
| CVE-2026-64004 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix locking in .getsockopt Mirror iucv_sock_setsockopt() and wrap the whole switch in lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock becomes redundant and is removed. Any AF_IUCV HIPER user can potentially crash the kernel by racing recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences iucv->hs_dev->mtu after iucv_sock_close() (called from the racing recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference oops. | ||||
| CVE-2026-64003 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called. | ||||
| CVE-2026-98133 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: leave HasEA flag untouched on setxattr failure In ntfs_set_ea(), the exit path unconditionally updates the HasEA flag based on ea_info_qsize. When an error occurs before ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk EAs until the inode is evicted. Only update the flag on success. | ||||
| CVE-2024-35937 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2026-10-08 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: check A-MSDU format more carefully If it looks like there's another subframe in the A-MSDU but the header isn't fully there, we can end up reading data out of bounds, only to discard later. Make this a bit more careful and check if the subframe header can even be present. | ||||
| CVE-2026-98134 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: check_cond_jmp_op(): properly infer if register is null Nicholas Carlini reported a bug when verifier can incorrectly infer that a pointer is non-null. The bug occurs when two pointers are compared and one of them has a type w/o PTR_MAYBE_NULL flag, but which allows a value to be NULL at runtime. Here is an example: // `a` is PTR_TO_MEM | MEM_RDONLY | PTR_UNTRUSTED // `a` is 0 at runtime. // `b` is PTR_TO_MAP_VALUE | PTR_MAYBE_NULL void *a = bpf_rdonly_cast(0, 0); int *b = bpf_map_lookup_elem(...); if (a == b) *b = 42; // verifier does not catch null pointer dereference This happens because of a special case in check_cond_jmp_op(), which attempts to strip PTR_MAYBE_NULL flags from pointer types, when processing comparisons like `rA == rB`, if either rA or rB can't be null. The non-null property is derived based on the absence of PTR_MAYBE_NULL flag on rA's or rB's type. But that is not sufficient for types like PTR_TO_MEM, as in the example. This patch replaces type_may_be_null() call with reg_not_null(), which contains an allowlist of types for which absence of PTR_MAYBE_NULL actually means that the value can't be NULL at runtime. At the moment, the list in the reg_not_null() omits two types for which PTR_MAYBE_NULL is applicable: PTR_TO_XDP_SOCK and PTR_TO_BUF. In order to remain backward compatible, and assuming that only comparison between pointers of the same type makes sense, this commit extends reg_not_null(). W/o such an extension e.g. verifier_jeq_infer_not_null/null_ptr_to_map_value fails. reg_not_null() can be extended further, but I deem that out of scope for the fix at hand. Explicit base_type(...) != PTR_TO_BTF_ID checks in the check_cond_jmp_op() can be removed with migration to reg_not_null(), but that is a behavioural change, as the special case would start matching for PTR_TO_BTF_ID that is also is_trusted_reg(). I omit the behavioural change from this commit. | ||||
| CVE-2026-98135 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject invalid sectors_per_cluster in the boot sector is_boot_sector_ntfs() checks the boot sector's sectors_per_cluster field with a range test that rejects 0x81..0xf3 but accepts 0 and other non-power-of-two counts. A zero value reaches parse_ntfs_boot_sector(): sectors_per_cluster_bits = ffs(sectors_per_cluster) - 1; ... vol->cluster_size = vol->sector_size << sectors_per_cluster_bits; ffs(0) is 0, so sectors_per_cluster_bits becomes (unsigned)-1 and the shift is undefined: UBSAN: shift-out-of-bounds in fs/ntfs/super.c:673:39 shift exponent 4294967295 is too large for 32-bit type 'int' This change rejects any non-power-of-two value, since it feeds the aforementioned shift via ffs() - 1, which only yields the correct shift for a power of two. | ||||
| CVE-2026-64002 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. | ||||
| CVE-2026-98136 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: bound $AttrDef table walk to the loaded table size ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the loop condition bounds only the start of each entry, not the whole entry: for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef < vol->attrdef_size && ad->type; ++ad) struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and the loop body reads further fields. vol->attrdef is kvzalloc(i_size), where i_size is the on-disk $AttrDef data size, checked in load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose $AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the read of ad->type run past the allocation. Creating a file reaches this through ntfs_attr_size_bounds_check() and reads out of bounds: BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0 Read of size 4 at addr ffff888005833280 by task init/1 ntfs_attr_find_in_attrdef ntfs_attr_size_bounds_check ntfs_attr_can_be_non_resident ntfs_attr_add Require the whole entry to lie within attrdef_size in the loop guard, and reject at mount a $AttrDef too small to hold one attr_def entry. | ||||
| CVE-2026-98137 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: treat any nonzero dio zero-range return as an error ntfs_dio_zero_range() returns either 0 or a negative errno from blkdev_issue_zeroout(); it never returns a positive value. The zeroing failure check in ntfs_attr_fallocate() therefore never fired, so a failed zeroing operation was silently ignored: the loop kept going, the newly allocated clusters were folded into initialized_size and the write could succeed leaving stale on-disk data. Treat any nonzero return as an error and abort the allocation. | ||||
| CVE-2026-98138 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: do not mark the volume clean in sync_fs when errors were recorded ntfs_put_super() and the remount-read-only path both clear the dirty bit only when NVolErrors(vol) is false. ntfs_sync_fs() clears it unconditionally, so any sync() on a volume that recorded an error marks that volume clean. A volume without this set is then seen as not needing recovery and it does not run one, so whatever went wrong is never repaired. This change skips resetting the dirty bit when there are volume errors. Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the error flag while leaving the mount read-write: after a write and a sync, the on-disk volume flags read 0x0000 with this driver and 0x0001 with the guard in place. | ||||
| CVE-2026-98139 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: only count successfully cleared runs when freeing clusters ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed whenever the error bookkeeping condition is false, which includes cases where ntfs_bitmap_clear_run() actually failed - e.g. a second run failing with the same errno as an earlier one, or any failure after a non-ENOMEM error was already recorded. Since a failed ntfs_bitmap_clear_run() rolls back its partial modifications, no bits were cleared for that run, yet its length still inflates vol->free_clusters, corrupting statfs output and the allocator's free space gate. Only count runs whose bitmap clear succeeded. | ||||
| CVE-2026-64015 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: security/keys: fix missed RCU read section on lookup Nicholas Carlini reports that the keyring code calls assoc_array_find() in find_key_to_update() without holding the RCU read lock, while the assoc_array_gc() code really is designed around removing the node from the tree and then freeing it after an RCU grace-period. The regular key handling doesn't see this because holding the keyring semaphore hides any lifetime issues, but the persistent key handling uses a different model. Instead of extending the keyring locking, just do the simple RCU locking that the assoc_array was designed for. | ||||
| CVE-2026-64000 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix potential OOB access in supervision frame handling Ensure the entire TLV header is linearized before access by adding sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this, a truncated frame could cause an out-of-bounds access. | ||||
| CVE-2026-63999 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: rss: fix indir_table and hkey leak on get_rxfh failure rss_prepare_get() allocates the indirection table and hash key buffer via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them. If get_rxfh() fails, the function returns an error without freeing the allocation. | ||||
| CVE-2026-63985 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc. | ||||
| CVE-2026-63986 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure The goto err label leads to: genlmsg_cancel(skb, ehdr); return ret; If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg. There's nothing to cancel, and passing an error pointer to genlmsg_cancel() would cause a crash. | ||||