Export limit exceeded: 409361 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409361 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409361 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68470 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate extension-frame layout before RX Extension frames only have the extension header at the regular 802.11 header offset. The generic RX path can still reach helpers and interface dispatch code that read regular header address fields before unsupported extension subtypes are dropped. mac80211 currently only handles S1G beacon extension frames. Drop other extension subtypes before they can reach regular-header RX processing. For S1G beacons, linearize the SKB with the management-frame path and require the fixed S1G beacon header, including optional fixed fields indicated by frame control, before generic RX dispatch. Route S1G beacons through the station/default-link RX path without regular-header station lookup. Avoid regular-header address reads in the mac80211 RX paths that process S1G extension beacons, including accept-frame, duplicate-detection, address-copy, and MLO address-translation paths. Also make ieee80211_get_bssid() length-safe before returning the S1G source-address pointer. | ||||
| CVE-2026-68461 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: device property: initialize the remaining fields of fwnode_handle in fwnode_init() If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitialized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. While at it: initialize the remaining fields of struct fwnode_handle too just to be sure. [ Fix typo in commit message. - Danilo ] | ||||
| CVE-2026-68454 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix handling of AIF enable without AISB When a guest seeks to register IRQs without a summary bit specified, ensure that the associated GAITE then stores 0 for the guest AISB location instead of virt_to_phys(page_address(NULL)). | ||||
| CVE-2026-68453 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix buffer over-read in cca_cipher2protkey Add validation of both the actual key buffer size and token length fields in all the cca_check_sec*token() functions. Additionally check in cca_gencipherkey() for possible underflow with returned key size. The CCA token structures contain user-controlled len fields that were used in operations without proper validation against both the actual buffer size and minimum token structure size. An attacker could set this field larger than the actual buffer size, leading to reading beyond buffer boundaries. This may result in a kernel crash or exposure of memory via sending this as part of a request down to the crypto card. Also an attacker could have used a very small len value and thus enforce a buffer under-run which may produce similar effects as a over-read. So now a key must - key buf length must be at least sizeof the token struct - the key len field inside the token must fit into the range of sizeof key token struct ... key buf length | ||||
| CVE-2026-68442 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't propagate EXTENT_FLAG_LOGGING to split extent maps When btrfs_drop_extent_map_range() splits an extent map, the new split maps inherit the original map's flags through a local 'flags' variable. Commit f86f7a75e2fb ("btrfs: use the flags of an extent map to identify the compression type") changed the EXTENT_FLAG_LOGGING clearing to operate on em->flags instead of that local 'flags' copy, so a split of an extent map that is currently being logged wrongly inherits EXTENT_FLAG_LOGGING. The flag is then never cleared on the split, and when it is freed while still on the inode's modified_extents list (for example by the extent map shrinker) it trips the WARN_ON(!list_empty(&em->list)) in btrfs_free_extent_map() and leads to a use-after-free. Clear EXTENT_FLAG_LOGGING from the local 'flags' copy used for the splits and only clear EXTENT_FLAG_PINNED from em->flags, restoring the behaviour prior to f86f7a75e2fb. | ||||
| CVE-2026-68432 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the sticky underlay netns vxlan->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in vxlan->net can rewrite a vxlan device whose underlay lives in vxlan->net. vxlan_changelink() validates and applies the new configuration against vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the underlay socket in that netns, so the same reasoning as the tunnel changelink series applies here. Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of the op before any attribute is parsed, matching ipgre_changelink() and the rest of the "require CAP_NET_ADMIN in the device netns for changelink" series. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68426 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: fix stale skb->prev after async crypto steals a GSO segment skb_gso_segment() leaves the segment list head with ->prev pointing at the last segment, an invariant validate_xmit_skb_list() relies on when it sets its tail pointer (tail = skb->prev). When validate_xmit_xfrm() walks a GSO list and some segments are stolen by async crypto (->xmit() returns -EINPROGRESS), those segments are unlinked from the list but the head ->prev is never updated. If the last segment is the one stolen, the returned head still has ->prev pointing at it, even though it is now owned by the crypto engine and may be freed. validate_xmit_skb_list() later does tail->next = skb, writing through that stale pointer -- a use-after-free. Repoint skb->prev at the last retained segment before returning. | ||||
| CVE-2026-68419 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent rereg_mr for non-mem regions When a QP/CQ/SRQ is created, a two step process is used where the buffer is allocated in userspace and explicitly registered with the normal reg_mr mechanism prior to creating the actual QP/CQ/SRQ object. These special registrations are indicated via an ABI field so the driver knows that they do not have a valid mkey and to skip the actual CQP command submission. Since these are real MR objects from the core's perspective, it is possible for a user application to invoke rereg_mr on them and cause a real CQP op to be emitted with the zero-initialized mkey value of 0. Fix this by preventing rereg_mr on these special regions. | ||||
| CVE-2026-68404 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev. | ||||
| CVE-2026-68397 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: take a reference on the socket found in afiucv_hs_rcv() afiucv_hs_rcv() looks up the destination socket under iucv_sk_list.lock, drops the lock, and then passes the socket to the afiucv_hs_callback_*() handlers without holding a reference. AF_IUCV sockets are not RCU-protected and are freed synchronously by iucv_sock_kill() -> sock_put(), so a concurrent close can free the socket in the window between read_unlock() and the handler, which then dereferences freed memory (for example sk->sk_data_ready() in afiucv_hs_callback_syn()). Take a reference with sock_hold() while the socket is still on the list and release it with sock_put() once the handler has run. | ||||
| CVE-2026-68394 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: revalidate LOAD_CONN_PARAM queued update MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter update changes an existing LE central connection. The queued work currently stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later LOAD_CONN_PARAM request can clear disabled parameters and free that entry before hci_cmd_sync_work() runs the queued callback. Do not keep the borrowed hci_conn_params pointer in queued work. Queue the hci_conn instead and hold a reference until the queued callback completes. When the work runs, revalidate that the connection is still present, look up the current hci_conn_params entry, and cancel the update if userspace removed that entry while the work was pending. Copy the interval values from the current params entry under hdev->lock, then drop the lock and keep using hci_le_conn_update_sync() to issue the update. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth] Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377 Workqueue: hci0 hci_cmd_sync_work [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 kasan_report+0xe0/0x110 conn_update_sync+0x2a/0xf0 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 Allocated by task 466: hci_conn_params_add+0xa6/0x240 [bluetooth] load_conn_param+0x4e1/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] Freed by task 474: kfree+0x313/0x590 hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth] load_conn_param+0x4bf/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] | ||||
| CVE-2026-68388 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: handle overlapping allocated ranges in fallocate smb3_simple_fallocate_range() can skip holes when an allocated range returned by the server starts before the current fallocate offset. The skipped hole is not zero-filled, but fallocate still returns success. A later write to that hole may therefore fail with ENOSPC. The function queries allocated ranges so that it can preserve existing contents and write zeroes only into holes. However, the server may return a range that starts before the current fallocate offset. For example, assume the fallocate request is [100, 400) and the only allocated range returned by the server is [0, 200): Request: [100, 400) Server range: [ 0, 200) allocated Correct: [100, 200) allocated data, skip [200, 400) hole, zero-fill Current: [100, 300) skipped [300, 400) zero-filled afterwards The current code adds the full server range length, 200, to the current offset 100 and moves to 300. As a result, the hole in [200, 300) is skipped without being zero-filled. Fix this by advancing only over the part of the allocated range that overlaps the current fallocate offset. Ignore ranges that end before the current offset and reject ranges whose end offset overflows. This also prevents a malformed range length from causing an out-of-bounds zero-buffer read. | ||||
| CVE-2026-68385 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/checksum: Fix csum_partial() without vector facility Currently csum_partial() calls csum_copy() with copy=false and dst=NULL. On machines without the vector facility, csum_copy() falls back to cksm(dst, ...), causing the checksum to be calculated from address zero instead of the source buffer. The VX implementation already checksums data loaded from src. Make the fallback do the same by passing src to cksm(). | ||||
| CVE-2026-68384 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO after it transitions NULL/SYSTEM -> TT, and detaches them after it transitions TT -> SYSTEM. Both operations were done synchronously on the CPU immediately after building the move's copy/clear fence, without waiting for that fence to signal. This creates two races with VF migration: - Attach happens too late relative to the copy job it is meant to protect. If the copy job is submitted before the CCS BBs are attached, a VF migration event that pauses execution mid-copy can observe partially copied CCS metadata without the attach state needed to correctly save/restore it. - Detach happens too early relative to the copy job that moves data out of TT. The CCS BBs are torn down right after the copy fence is obtained, while the actual blit may still be in flight. A VF migration event that pauses execution mid-copy can then race the save/restore path against the still-running blit, and the CCS BBs it would need to make sense of the paused state have already been removed. Fix both races: - Move the attach call to before the copy/clear job is submitted, so the CCS BBs are already registered by the time the copy runs. On attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy() now takes the destination resource explicitly, since bo->ttm.resource is not updated to the new resource until after the move commits. - Detach only after explicitly waiting for the copy fence to signal, instead of tearing down the CCS BBs immediately after obtaining it. While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and propagate errors: the per-context loop previously never broke out on error, silently discarding earlier failures. Unwind by clearing each attached context directly via xe_migrate_ccs_rw_copy_clear() instead of reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be attached before it will clean up either one. (cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e) | ||||
| CVE-2026-68383 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Keep scheduler timeline name alive The scheduler keeps a pointer to the timeline name, but q->name is freed with the exec queue while scheduler fences can still reference it. Store the name in struct xe_guc_exec_queue so it shares the scheduler's RCU-deferred lifetime. (cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) | ||||
| CVE-2026-68382 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Hold device ref until queue teardown completes GuC exec queue destruction can run asynchronously. If the final device put happens from a destroy worker, drmm cleanup can end up draining the same workqueue and deadlock. Hold a drm_device reference for the queue lifetime and drop it after queue teardown completes. This keeps drmm cleanup from running while async destroy work is still pending. Move GuC destroy work to a module-lifetime Xe workqueue and flush it on PCI remove so hot-unbind/rebind still waits for pending destroy work. With queue-held device refs, guc_submit_sw_fini() cannot run with live GuC IDs. Replace the fini wait with an assertion and remove the unused fini_wq. v2: - Rebase v3: - Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt) - Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt) - Drop separate deferred drm_dev_put worker. - Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini(). v4: - Replace the guc_submit_sw_fini() wait with an assertion and remove the now-unused fini_wq. (sashiko) v5: - Move destroy work to a module-lifetime Xe workqueue instead of system_dfl_wq. (Matt) - Flush the module-lifetime destroy workqueue during PCI remove to preserve the old device-remove wait semantics. v6: - Keep SVM pagemap destroy work on the per-device destroy_wq to avoid letting it outlive the xe_device/drm_device. (Sashiko) - Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work can be queued from the reclaim path. v7: - Drop the per-device xe->destroy_wq and use the module-level destroy WQ for SVM pagemap destroy as well. (Matt) - Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*() helpers because the WQ is no longer exec-queue specific. (Matt) v8: - Rebase. v9: - Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM destroy_wq because it can be queued from reclaim and embeds the dev_pagemap used by devres teardown. (Sashiko) - Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM from it. - Update the module-WQ kdoc to document the GuC/SVM split. v10: - Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the workqueue allocation warning. v11: - Drop the SVM pagemap destroy comment as it was revision-specific. (Thomas) v12: - Rebase. (cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb) | ||||
| CVE-2026-68381 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: pin conn during async oplock break notification smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn pointer in an async ksmbd_work and then queue that work on ksmbd-io. The work only increments conn->r_count, which prevents teardown from passing the pending-request wait after the increment, but it does not pin the struct ksmbd_conn object. If connection teardown races with an oplock break notification, the last conn reference can be dropped before the queued worker finishes. The worker then uses the freed conn in ksmbd_conn_write() and ksmbd_conn_r_count_dec(). Take a real conn reference when publishing the conn pointer to the async work item, and drop it after the notification work has decremented r_count. Apply the same lifetime rule to lease break notification, which uses the same work->conn pattern. | ||||
| CVE-2026-68374 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: core: sysfs: add lock to bos_descriptors_read() Add a lock to the function bos_descriptors_read(). This function accesses udev->bos, which could be simultaneously freed in usb_reset_and_verify_device(), a function that is commonly called in drivers all over the kernel. | ||||
| CVE-2026-68353 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler The firmware-controlled num_msg field (u8, 0-255) drives the loop in ath6kl_wmi_tx_complete_event_rx() without validation against the buffer length. This allows out-of-bounds reads of up to 1020 bytes past the WMI event buffer when the firmware sends an inflated num_msg. Add a check that the buffer is large enough to hold the fixed struct and the num_msg variable-length entries. | ||||
| CVE-2026-68348 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2781: bound firmware description string parsing The TAS2781 firmware parser reads several variable-length description strings with strlen() before checking that the string terminator is present inside the firmware blob. A malformed firmware image without a NUL terminator can therefore make the parser walk past the end of the firmware buffer before the later size checks run. Add a small bounded string-length helper and use it for all description fields that are parsed from the firmware buffer. Keep the existing size checks for the fixed bytes that follow each string. | ||||