| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Podman. If an attacker can pass a crafted tar archive to the `podman load` command, they can create files on the host machine with the privileges of the user running Podman. |
| A unit confusion in BusyBox TLS Montgomery reduction buffer allocation causes a pre-authentication heap buffer overflow when processing a crafted ClientKeyExchange message. |
| Improper handling of length parameter inconsistency vulnerability in Apache Tomcat allows WebSocket message smuggling when per-message-deflate is used.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.25, from 10.1.0-M1 through 10.1.59, from 9.0.0.M1 through 9.0.121.
The following versions were EOS at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.56 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.1.22, which fix the issue. |
| Missing release of resource after effective lifetime, Comparison using wrong factors vulnerability in Apache Tomcat allows a denial of service as a result of lost time outs for asynchronous WebSocket writes.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.25, from 10.1.0-M1 through 10.1.59, from 9.0.0.M1 through 9.0.121.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.43 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| Incomplete cleanup vulnerability in Apache Tomcat allows a malformed request to potentially (depends on timing) cause one request from another user to fail.
This issue affects Apache Tomcat: from 11.0.19 through 11.0.25, from 10.1.53 through 10.1.59, from 9.0.116 through 9.0.121.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| Allocation of resources without limits or throttling vulnerability in Apache Tomcat allows an unauthenticated AJP request to pin an AJP processing thread leading to denial of service.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.25, from 10.1.0-M1 through 10.1.59, from 9.0.0.M1 through 9.0.121.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| Uncontrolled Resource Consumption vulnerability in Apache Tomcat during sending of WebSocket close message enabled a DoS attack.
This issue affects Apache Tomcat: from 11.0.0-M5 through 11.0.25, from 10.1.8 through 10.1.59, from 9.0.74 through 9.0.121.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.88 through 8.5.100. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| Authentication Bypass by Alternate Name vulnerability in Apache Tomcat allowed the security constraints for any WebSocket endpoint to be bypassed.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.25, from 10.1.0-M1 through 10.1.59, from 9.0.0.M1 through 9.0.121.
The following versions were EOS at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.43 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| Improper Authentication vulnerability in Apache Tomcat. When Jakarta Authentication was configured with SimpleAuthConfigProvider as the default provider and multiple web application used that provider, the realm for the first web application to authenticate a request would be used for all web applications.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.25, from 10.1.0-M1 through 10.1.59, from 9.0.0.M4 through 9.0.121.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.26, 10.1.60, 9.0.122, which fixes the issue. |
| Inconsistent interpretation of HTTP/2 requests ('HTTP Request/Response smuggling') vulnerability in Apache Tomcat caused by a regression in fix for CVE-2026-41293 can trigger request header mix-up.
This issue affects Apache Tomcat: from 11.0.22 through 11.0.25, from 10.1.55 through 10.1.59, from 9.0.118 through 9.0.121.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| A flaw was found in libstdc++. An integer overflow can occur when processing large inputs to the aligned operator new in the C++ library. This vulnerability could lead to an undersized memory allocation, potentially causing memory corruption or application instability. |
| A flaw was found in bubblewrap. During sandbox setup, creating files or directories under the new root can follow a parent symlink onto the host via /oldroot, writing attacker-chosen paths outside the sandbox as the launching user. This happens before the sandboxed process starts. This issue is GHSA-pxhw-h44j-8pfx. It is fixed in bubblewrap 0.12.0. |
| A flaw was found in GNU tar. When extracting an archive with the --one-top-level option, hardlink targets are not confined to the designated top-level directory and may resolve relative to the extraction working directory. A crafted archive can create hardlinks that escape the intended boundary and, when combined with a preexisting symbolic link under the working directory, may allow writing outside that boundary during a single extraction. |
| A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue. |
| A flaw was found in tar. A remote attacker could exploit this vulnerability by crafting a malicious archive, leading to hidden file injection with fully attacker-controlled content. This bypasses pre-extraction inspection mechanisms, potentially allowing an attacker to introduce malicious files onto a system without detection. |
| joi (npm package `joi`, hapi.js) versions >=17.2.0 <17.13.7 and >=18.0.0 <18.2.6 are vulnerable to regular expression denial of service in the `Joi.string().isoDate()` validation rule. One of the regular expressions the rule applies to the input is unanchored, so a valid ISO date followed by a long run of fractional-second digits causes the regex engine to restart its search from every position in the string, yielding time proportional to the square of the input length (about 1.4 s for 64 KB of digits and about 22 s for 256 KB). A remote attacker who can supply a string to an isoDate validation can stall the application with a single request. Fixed in 17.13.7 and 18.2.6; as a workaround, cap the length of the string before it reaches joi. |
| A flaw was found in libssh. Logic errors in automatic certificate-based public key authentication can cause libssh clients to loop indefinitely when configured certificates are missing or repeatedly rejected by a server, leading to denial of service. |
| A flaw was found in libssh. During server-side GSSAPI key exchange, a client-supplied Curve25519 public key shorter than the expected length is copied without proper length validation, leading to an out-of-bounds heap read. This could allow a remote unauthenticated attacker to disclose small amounts of server memory. |
| A flaw was found in libssh. During SFTP server directory listing, the longname field is constructed with unsafe concatenation into a fixed-size stack buffer. When a client causes the server to list attacker-controlled filenames, sufficiently long names can overflow that stack buffer and may lead to crashes or possible code execution on the server. |
| The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning.
There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files. However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker.
The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback). |
