| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use kvzalloc to allocate struct dc
struct dc has grown large over time (most of it the two inlined
dc_scratch_space copies) and now sits close to the page allocator's 4 MiB
contiguous allocation limit. Its actual size is not fixed by the source
alone, it also depends on the compiler and the .config, so it can easily
cross 4 MiB, e.g. with a newer GCC or a config change.
dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the
request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER,
so the page allocator warns and returns NULL. dc_create() then fails, DM
init fails and amdgpu probe aborts with -EINVAL:
WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380
dc_create+0x38/0x660 [amdgpu]
amdgpu_dm_init+0x2d9/0x510 [amdgpu]
dm_hw_init+0x1b/0x90 [amdgpu]
amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu]
amdgpu_driver_load_kms+0x19/0x80 [amdgpu]
amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu]
dc_create() then returns NULL and DM init fails, which aborts the whole
GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block
<dm> failed -22"), leaving the display unusable. The subsequent
amdgpu_irq_put() warnings during teardown are just fallout of unwinding
a half-initialized device.
struct dc is a software-only bookkeeping structure that is never handed
to hardware DMA and is only ever kept as an opaque pointer, so it does
not require physically contiguous memory. Allocate it with kvzalloc()
(and free it with kvfree()) so that the allocator can fall back to
vmalloc() when a contiguous allocation of that size is not available,
which also avoids the MAX_PAGE_ORDER warning entirely.
v2:
- Rebase to amd-staging-drm-next.
(cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: use wiphy work for socket owner autodisconnect
nl80211_netlink_notify() walks the cfg80211 wireless device list when a
NETLINK_GENERIC socket is released. If the socket owns a connection, the
notifier queues the embedded wdev->disconnect_wk work item.
That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a
NETLINK_URELEASE notifier that already observed conn_owner_nlportid can
queue it after that cancel returns. _cfg80211_unregister_wdev() then
removes the wdev from the list and waits for RCU readers, but
synchronize_net() does not drain work queued by such a reader.
Make the autodisconnect work a wiphy_work instead. The callback already
needs the wiphy mutex, and wiphy_work runs under that mutex. This lets
teardown cancel pending autodisconnect work while holding the mutex,
without a cancel_work_sync() vs. worker locking concern.
Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any
NETLINK_URELEASE notifier that had already reached the wdev list has then
either queued the work and it is removed, or can no longer find the wdev. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF in sock clone early bailouts
Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage
before bailouts that access it"), sk_clone() performs an initial
shallow copy of the socket field ->sk_bpf_storage via sock_copy()
for the cloned socket newsk.
If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior
to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points
to the parent socket's BPF local storage. When newsk is subsequently
freed via sk_free(), the deallocation path (__sk_destruct() ->
bpf_sk_storage_free()) destroys the parent socket's BPF local storage,
leading to a use-after-free (UAF) on the parent socket.
Fix this by resetting newsk->sk_bpf_storage to NULL immediately after
sock_copy() in sk_clone(), and remove the now redundant initialization
from bpf_sk_storage_clone(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Keep scheduler timeline name alive
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
(cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Hold device ref until queue teardown completes
GuC exec queue destruction can run asynchronously. If the final device
put happens from a destroy worker, drmm cleanup can end up draining
the same workqueue and deadlock.
Hold a drm_device reference for the queue lifetime and drop it after
queue teardown completes. This keeps drmm cleanup from running while
async destroy work is still pending.
Move GuC destroy work to a module-lifetime Xe workqueue and flush it
on PCI remove so hot-unbind/rebind still waits for pending destroy work.
With queue-held device refs, guc_submit_sw_fini() cannot run with live
GuC IDs. Replace the fini wait with an assertion and remove the unused
fini_wq.
v2:
- Rebase
v3:
- Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt)
- Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt)
- Drop separate deferred drm_dev_put worker.
- Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini().
v4:
- Replace the guc_submit_sw_fini() wait with an assertion and remove
the now-unused fini_wq. (sashiko)
v5:
- Move destroy work to a module-lifetime Xe workqueue instead of
system_dfl_wq. (Matt)
- Flush the module-lifetime destroy workqueue during PCI remove to
preserve the old device-remove wait semantics.
v6:
- Keep SVM pagemap destroy work on the per-device destroy_wq to avoid
letting it outlive the xe_device/drm_device. (Sashiko)
- Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work
can be queued from the reclaim path.
v7:
- Drop the per-device xe->destroy_wq and use the module-level destroy WQ
for SVM pagemap destroy as well. (Matt)
- Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*()
helpers because the WQ is no longer exec-queue specific. (Matt)
v8:
- Rebase.
v9:
- Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM
destroy_wq because it can be queued from reclaim and embeds
the dev_pagemap used by devres teardown. (Sashiko)
- Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM
from it.
- Update the module-WQ kdoc to document the GuC/SVM split.
v10:
- Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the
workqueue allocation warning.
v11:
- Drop the SVM pagemap destroy comment as it was revision-specific.
(Thomas)
v12:
- Rebase.
(cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: serialize udp bearer replicast list updates
tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with
list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs
from the encap receive softirq (via tipc_udp_rcast_disc()) without
rtnl_lock(), so it can race the cleanup delete and corrupt the list:
list_del corruption. prev->next should be ffff8880298d7ab8,
but was ffff88802449ad38. (prev=ffff888027e3ec98)
kernel BUG at lib/list_debug.c:62!
RIP: __list_del_entry_valid_or_report+0x17a/0x200
Workqueue: events cleanup_bearer
Call Trace:
cleanup_bearer (net/tipc/udp_media.c:811)
process_one_work (kernel/workqueue.c:3302)
worker_thread (kernel/workqueue.c:3466)
The bearer can be enabled from an unprivileged user namespace, as the
TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM.
Add a spinlock to struct udp_bearer and take it around the list_add_rcu()
in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so
the two writers can no longer corrupt the list.
Reject a duplicate peer under the same lock before allocating, and remove
tipc_udp_is_known_peer(). The old lockless pre-check in
tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer
could both find it absent and add it twice.
cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the
bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add()
and add a peer after cleanup_bearer() has already emptied the list, leaking
that entry when the bearer is freed. Mark the bearer disabled under
rcast_lock once the list is emptied and refuse further additions. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths
In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and
cifs_close_deferred_file_under_dentry(), when a pending deferred close
is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to
add the file to the local processing list may fail under memory pressure.
The loop breaks immediately, but the cancelled work is no longer pending
(it would have called _cifsFileInfo_put()), and the cfile is never added
to file_head for processing. The cifsFileInfo reference and the open
server handle both leak.
Fix by saving the cfile that failed allocation in a local variable,
breaking as before, and calling _cifsFileInfo_put() on it after
releasing the lock. Any files later in the iteration are unaffected
since their deferred work is still pending and will fire normally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Add drm_dev guards when detaching CCS read/write buffers
CCS read/write buffers are freed during BO destruction. In some cases,
BOs may be destroyed after the device is unbound but while the DRM
structure remains valid, leading to NULL pointer dereferences when
accessing device resources.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 9376 Comm: xe_pat Not tainted 7.2.0-rc2+ #1 PREEMPT(lazy)
RIP: 0010:xe_sriov_vf_ccs_rw_update_bb_addr+0x4d/0xa0 [xe]
RSP: 0018:ffffcf304110b9c8 EFLAGS: 00010246
RAX: ffff8a85c38a0a00 RBX: 00000000810ef000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8a85c39c1888
RBP: ffffcf304110b9e8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a85c39c1888
R13: 0000000000000000 R14: ffff8a85c39b4f28 R15: ffff8a85c3885000
FS: 0000000000000000(0000) GS:ffff8a878b809000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010314a002 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<TASK>
xe_migrate_ccs_rw_copy_clear+0x98/0x120 [xe]
xe_sriov_vf_ccs_detach_bo+0x2c/0x60 [xe]
xe_ttm_bo_delete_mem_notify+0xc8/0xe0 [xe]
ttm_bo_cleanup_memtype_use+0x26/0x80 [ttm]
ttm_bo_release+0x29e/0x2d0 [ttm]
ttm_bo_fini+0x39/0x70 [ttm]
xe_gem_object_free+0x1f/0x30 [xe]
drm_gem_object_free+0x1d/0x40
ttm_bo_vm_close+0x5f/0x90 [ttm]
remove_vma+0x2c/0x70
tear_down_vmas+0x63/0xf0
exit_mmap+0x20d/0x3f0
__mmput+0x45/0x170
mmput+0x31/0x40
do_exit+0x2ba/0xac0
do_group_exit+0x2d/0xb0
__x64_sys_exit_group+0x18/0x20
x64_sys_call+0x14a0/0x2390
do_syscall_64+0xdd/0x640
? count_memcg_events+0xea/0x240
? handle_mm_fault+0x1ec/0x2f0
(cherry picked from commit 1ae415a6eefe5004954a1d352b1718faca8844ef) |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
ALU32 operations write a 32-bit result and leave the upper 32 bits of
the BPF register zero. The LoongArch JIT sign-extends the result of
signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient
or remainder leaves bits 63:32 set in JITted code while the verifier
and interpreter model those bits as zero.
Keep sign-extension on the operands, which signed divide needs, and
zero-extend the ALU32 result after the divide or modulo instruction,
matching the unsigned ALU32 div/mod paths and every other ALU32
operation in this JIT. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix max_vport related crash on allocation error during init
Set adapter->max_vports only after successful allocation of vports, netdevs
and vport_config buffers. This fixes possible crashes on reset or rmmod,
following failed allocation on init
[ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated
[ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 320.416918] #PF: supervisor read access in kernel mode
[ 320.416942] #PF: error_code(0x0000) - not-present page
[ 320.416963] PGD 2099657067 P4D 0
[ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI
...
[ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf]
[ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20
[ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246
[ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c
[ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000
[ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000
[ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20
[ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000
[ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0
[ 320.417385] PKRU: 55555554
[ 320.417398] Call Trace:
[ 320.417412] <TASK>
[ 320.417429] pci_device_remove+0x42/0xb0
[ 320.417459] device_release_driver_internal+0x1a9/0x210
[ 320.417492] driver_detach+0x4b/0x90
[ 320.417516] bus_remove_driver+0x70/0x100
[ 320.417539] pci_unregister_driver+0x2e/0xb0
[ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0
[ 320.417592] ? kmem_cache_free+0x31e/0x550
[ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190
[ 320.417644] ? do_syscall_64+0x38/0x6b0
[ 320.417665] do_syscall_64+0xc8/0x6b0
[ 320.417683] ? clear_bhb_loop+0x30/0x80
[ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 320.417727] RIP: 0033:0x7f963bb30beb |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Fix NULL deref on sched_engine alloc failure
Avoid using intel_context_put() before intel_context_init() in
execlists_create_virtual() as the kref_put() inside would lead
to NULL deref on the IOCTL path when sched_engine allocation fails.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
(cherry picked from commit 4f2a12f2d50e9f48227656e4dcbd6423506be31d) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix kernel panic during driver load failure
Avoid kernel panic if MES init fails during driver load. The KIQ ring is
falsely marked as ready as ASICs that use MES, KIQ is owned by MES.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu]
Call Trace:
gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu]
amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu]
amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu]
amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu]
amdgpu_gart_unbind+0x72/0x90 [amdgpu]
amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu]
amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu]
amdttm_tt_unpopulate+0x29/0x70 [amdttm]
ttm_bo_put+0x1eb/0x360 [amdttm]
amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu]
amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu]
amdgpu_irq_fini_hw+0x58/0x80 [amdgpu]
amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu]
amdgpu_driver_load_kms+0x60/0xa0 [amdgpu]
amdgpu_pci_probe+0x28e/0x6d0 [amdgpu]
pci_device_probe+0x19f/0x220
really_probe+0x1ed/0x340
driver_probe_device+0x1e/0x80
__driver_attach+0xd3/0x1a0
bus_for_each_dev+0x68/0xa0
bus_add_driver+0x19f/0x270
driver_register+0x5d/0xf0
do_one_initcall+0xac/0x200
do_init_module+0x1ec/0x280
__se_sys_finit_module+0x2de/0x310
do_syscall_64+0x6a/0x250
entry_SYSCALL_64_after_hwframe+0x4b/0x53
(cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent path traversal bypass by restricting caseless retry
ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path
resolution within the share root. When a crafted path attempts to
escape the share boundary using parent-directory components ('..'),
vfs_path_parent_lookup() detects this and immediately fails,
returning -EXDEV.
However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode.
The function fails to intercept the -EXDEV error and erroneously
falls through to the caseless retry logic, which is intended only
for genuinely missing files. During this retry process, the path
is reconstructed, leading to an unintended LOOKUP_BENEATH bypass
that allows write-capable users to create zero-length files or
directories outside the exported share.
Fix this by ensuring that the execution only proceeds to the caseless
lookup retry when the error is specifically -ENOENT. Any other errors,
such as -EXDEV from a path traversal attempt, must be returned immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix chown/chgrp with SMB3 POSIX Extensions
Ownership (chown) and group (chgrp) modifications were being ignored when
mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or
CIFS_MOUNT_MODE_FROM_SID were also explicitly set.
Fix this by checking for posix_extensions in cifs_setattr_nounix() when
updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map
and set the ownership/group information on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921/mt7925: fix NULL dereference in CSA beacon
This patch is based on a BUG as reported by Bongani Hlope at
https://lore.kernel.org/all/20260502125824.425d7159@bongani-mini.home.org.za/
When a channel-switch announcement (CSA) beacon is received,
cfg80211 queues a wiphy work item that eventually calls
mt7921_channel_switch_rx_beacon(). If the station disconnects
(or the channel context is otherwise torn down) between the
time the work is queued and the time it runs, the driver's
dev->new_ctx pointer can already have been cleared to NULL.
mt7921_channel_switch_rx_beacon() then dereferences new_ctx
unconditionally, triggering a NULL pointer dereference at
address 0x0:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:mt7921_channel_switch_rx_beacon+0x1f/0x100 [mt7921_common]
The same missing guard exists in mt7925_channel_switch_rx_beacon(),
which shares the same code pattern introduced by the same commit.
Add an early-return NULL check for dev->new_ctx in both
mt7921_channel_switch_rx_beacon() and
mt7925_channel_switch_rx_beacon(). When new_ctx is NULL there is
no pending channel switch to process, so returning immediately is
the correct and safe action.
Oops-Analysis: http://oops.fenrus.org/reports/lkml/20260502125824.425d7159@bongani-mini.home.org.za/report.html |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Treat memslot binding offset+size as unsigned values
When binding a memslot to a guest_memfd file, treat the offset and size as
unsigned values to fix a bug where the sum of the two can result in a false
negative when checking for overflow against the size of the file. Passing
unsigned values also avoids relying on somewhat obscure checks in other
flows for safety, and tracks the offset and size as they are intended to be
tracked, as unsigned values.
On 64-bit kernels, the number of pages a memslot contains and thus the size
(and offset) of its guest_memfd binding are unsigned 64-bit values. Taking
the offset+size as an loff_t instead of a uoff_t inadvertently converts
the unsigned value to a signed value if the offset and/or size is massive.
Locally storing the offset and size as signed values is benign in and of
itself (though even that is *extremely* difficult to discern), but
operating on their sum is not.
For the offset, KVM explicitly checks against a negative value, which might
seem like a bug as KVM could incorrectly reject a legitimate binding, but
that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value
for its size, i.e. a would-be-negative offset is also greater than the
maximum possible size of any guest_memfd file.
Regarding the size, while KVM lacks an explicit check for a negative value,
i.e. seemingly has a flawed overflow check, KVM restricts the number of
pages in a single memslot to the largest positive signed 32-bit value:
if (id < KVM_USER_MEM_SLOTS &&
(mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES)
return -EINVAL;
and so that maximum "size" will ever be is 0x7fffffff000.
The sum of the two is, however, problematic. While the size is restricted
by KVM's memslot logic, the offset is not, i.e. the offset is completely
unchecked until the "offset + size > i_size_read(inode)" check. If the
offset is the (nearly) largest possible _positive_ value, then adding size
to the offset can result in a signed, negative 64-bit value. When compared
against the size of the file (guaranteed to be positive), the negative sum
is always smaller, and KVM incorrectly allows the absurd offset.
Opportunistically add missing includes in kvm_mm.h (instead of relying on
its parents). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix zeropoint update where i_size > remote_i_size
Fix the update of the zero point[*] by netfs_release_folio() when there is
uncommitted data in the pagecache beyond the folio being released but the
on-server EOF is in this folio (ie. i_size > remote_i_size). The update
needs to limit zero_point to remote_i_size, not i_size as i_size is a local
phenomenon reflecting updates made locally to the pagecache, not stuff
written to the server. remote_i_size tracks the server's i_size.
[*] The zero point is the file position from which we can assume that the
server will just return zeros, so we can avoid generating reads.
Note that netfs_invalidate_folio() probably doesn't need fixing as
zero_point should be updated by setattr after truncation or fallocate.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0x1bbae 0x82864
write 0x3ef2e 0xf9c8 0x1bbae
write 0x67e05 0xcb5a 0x4e8f6
mapread 0x57781 0x85b6 0x7495f
copy_range 0x5d3d 0x10329 0x54fac 0x7495f
write 0x64710 0x1c2b 0x7495f
mapread 0x64000 0x1000 0x7495f
on cifs with the default cache option.
It shows read-gaps on folio 0x64 failing with a short read (ie. it hits
EOF) if the FMODE_READ check is commented out in netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: Fix a reference leak in a6xx_gpu_init()
In a6xx_gpu_init(), node is obtained via of_parse_phandle().
While there was a manual of_node_put() at the end of the
common path, several early error returns would bypass this call,
resulting in a reference leak.
Fix this by using the __free(device_node) cleanup handler to
release the reference when the variable goes out of scope.
Patchwork: https://patchwork.freedesktop.org/patch/700661/ |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix metabuf leak in inode xattr initialization
commit bb88e8da0025 ("erofs: use meta buffers for xattr operations")
converted xattr operations to use on-stack erofs_buf instances.
erofs_init_inode_xattrs() uses such a metabuf while reading the inline
xattr header and shared xattr id array.
Some error paths after erofs_read_metabuf() leave through out_unlock
without dropping the metabuf, so the folio reference can leak.
Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a
no-op if no folio has been acquired, and this keeps all paths after
taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site. |
