| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw is an npm-distributed gateway application. In versions >= 2026.7.1 and < 2026.8.1, Synology Chat attachment delivery could lose DNS pinning: the Gateway validated a single DNS result for a supplied file URL but then passed the original hostname to the Synology NAS, where it could resolve to a different destination. When attachment delivery accepted a remotely influenced hostname, an attacker could use DNS rebinding to make the NAS fetch a private or otherwise policy-denied resource and return its contents to the addressed conversation (server-side request forgery). Practical impact depends on NAS routing, resolver behavior, and the response available at the private destination. The issue is fixed in 2026.8.1; as a workaround, disable remote URL attachment forwarding in Synology Chat. |
| MediaFlow Proxy through 2.4.9 contains a server-side request forgery vulnerability in the /proxy routes due to missing and incomplete destination validation in the d query parameter. Remote attackers can supply arbitrary internal URLs including loopback and cloud metadata endpoints to read full responses from the proxy server. |
| A security flaw has been discovered in Shaarli up to 0.16.3. The affected element is the function MetadataController of the file application/front/controller/admin/MetadataController.php of the component Admin Metadata Endpoint. Performing a manipulation of the argument url results in server-side request forgery. The attack may be initiated remotely. Upgrading to version 0.16.4 is sufficient to fix this issue. The patch is named 8ca4de8e7c932a684481f5fbb1229fe16de1f4d2. It is advisable to upgrade the affected component. |
| A flaw has been found in ChatGPTNextWeb NextChat up to 2.16.1. This vulnerability affects the function proxyHandler of the file app/api/proxy.ts of the component Proxy Fallback Handler. This manipulation of the argument x-base-url causes server-side request forgery. It is possible to initiate the attack remotely. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. |
| A vulnerability was identified in SciPhi-AI R2R up to 3.6.6. This vulnerability affects unknown code of the file py/shared/abstractions/llm.py of the component Retrieval Completion API Endpoint. Such manipulation of the argument generation_config.api_base leads to server-side request forgery. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| LibreOffice Calc can link a cell range to an external csv data source, and the link is saved in the document. Such a link was fetched while the document loaded, so opening a document could read a local file into the sheet, or make a request to a host of the document's choosing. In fixed versions external data links are updated under the same link update control as other links in a spreadsheet. |
| Improper validation of FTP PASV reply address in mod_proxy_ftp in Apache Software Foundation Apache HTTP Server through 2.4.68 on all platforms allows, in forward proxy configurations, an untrusted FTP server to cause the proxy to open a data connection to an arbitrary third-party host via a crafted PASV response.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Server-Side Request Forgery (SSRF) vulnerability in ThemeREX Group ThemeREX Addons trx_addons allows Server Side Request Forgery.This issue affects ThemeREX Addons: from n/a through 2.46.0. |
| Tinypool is a minimal Node.js worker thread pool implementation. Prior to 2.1.1, Tinypool constructs ThreadPool.options from a normal options object and reads the execArgv and env worker options in dist/index.js, allowing values inherited from a polluted Object.prototype to be copied into own properties and passed to worker_threads.Worker. An attacker who can first pollute either property can cause each newly spawned worker to load attacker-selected JavaScript through command-line preload arguments or NODE_OPTIONS, resulting in code execution with the host process's privileges and possible access to CI secrets, signing material, or build artifacts. This issue is fixed in version 2.1.1. |
| Weaver e-Bridge contains an unauthenticated arbitrary file read vulnerability that allows remote attackers to access arbitrary files on the host system by supplying a file: URL to the downloadUrl parameter of the saveYZJFile endpoint. Attackers can exploit this flaw to read sensitive files such as /etc/passwd or configuration and credential files, and the same endpoint's support for http(s) URLs also enables server-side request forgery against internal network resources. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-17. |
| Server-side request forgery in the tool server and remote agent connection handling in Loom for AWS before 1.7.0 might allow an authenticated remote user to obtain the credentials of the application's own container role and to read responses from arbitrary internal network locations, via a crafted connection address supplied when registering, updating or testing a tool server or remote agent.
To remediate this issue, users should upgrade to version 1.7.0 or later. |
| YesWiki before 4.6.7 contains a server-side request forgery vulnerability that allows page editors to make the server fetch arbitrary URLs via the url parameter of the Bazar valeur action. Attackers can embed the action with a champ parameter in wiki markup to reach loopback or internal services and partially read responses rendered into the page. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix clock leak and spurious timer in settimeout()
msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which
introduces two severe bugs:
1. If the watchdog is already active, calling start() again will
increase the reference count of the clock again. However stop() is
only called once, the reference count is unbalance.
2. If the watchdog is stopped, calling settimeout() will start
the hardware timer accidentally.
Factor out the register-writing logic into a helper function. Only call
it in settimeout() if the watchdog is running. Otherwise, simply update
`wdev->timeout`. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: pin DFS superblock in iterator callback
tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super()
takes its active reference only after iterate_supers_type() has dropped
s_umount and its passive reference. Concurrent DFS automount expiry can
therefore free the superblock before cifs_sb_active() uses it.
A deterministic KASAN test reproduces the race as:
BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80
The same test passes with this change applied.
Take the active reference in the callback while iterate_supers_type()
still holds s_umount shared. cifs_put_tcp_super() remains the matching
release. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount in cifs_queue_oplock_break()
cifs_queue_oplock_break() unconditionally takes a reference on the
target file before queueing cifs_oplock_break(). Only that work item
decreases the reference counter again.
If another oplock break arrives while that work is still queued,
queue_work() will return false and not queue this second work item. As a
result, we will never reach the point to drop the file reference again
and are leaking this reference. This can be triggered when interacting
with a slow-responding server.
As a result, later unmount operations for this file system will fail with
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
kernel BUG at fs/super.c:777!
Fix this by only incrementing the reference count if the work has been
queued successfully. Taking it after queue_work() is safe because all
three callers hold tcon->open_file_lock across the call and
_cifsFileInfo_put() decrements under that same lock, so a worker that
starts the handler in the window cannot drop the reference before it has
been taken. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount when cifs_sb_tlink() fails
cifs_oplock_break() takes over the reference that
cifs_queue_oplock_break() acquired when it queued the work, and drops it
with _cifsFileInfo_put() once the break has been processed.
Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which
point cifs_oplock_break() returns without putting the file reference,
mirroring the reference leak we already fixed in the companion patch to
cifs_queue_oplock_break().
This would trigger a crash due to busy inodes on the next unmount:
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
Drop the reference on that path as well. Doing so before the out label
mirrors the normal path, which also puts the reference before
cifs_done_oplock_break().
Found by Sashiko code review. The failure path was not exercised at
runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix node refcount leak on ctrl packet alloc failure
qrtr_send_resume_tx() calls qrtr_node_lookup() which takes a
reference on the returned node. If the subsequent call to
qrtr_alloc_ctrl_packet() fails due to memory allocation failure, the
function returns -ENOMEM without calling qrtr_node_release() to
release the node reference.
Add qrtr_node_release(node) before returning on the allocation failure
path to properly release the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount
Add a refcount for struct nf_ct_timeout which is used by ct extension to
set the custom ct timeout policy, this tells us that the ct timeout is
being used by a conntrack entry. When the last conntrack entry drops the
refcount on the ct timeout, the ct timeout is released.
Remove the refcount for control plane which controls if the ruleset
refers to the timeout policy. After this update, it is possible to
remove the ct timeout policy from nfnetlink_cttimeout immediately.
This is for simplicity not to handle two refcounts on a single object.
Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just
hold a reference to the nf_ct_timeout object until packet is reinjected,
since this is part of the ct extension, this will be released by the
time the conntrack is freed.
nf_ct_untimeout() is still called to clean up in a best effort basis:
the ct timeout on existing entries gets removed when the ct timeout goes
away, but as long as the iptables ruleset still refers to the ct timeout
through a template, new conntracks may keep attaching it and extend its
lifetime until the rule is removed.
nf_ct_untimeout() is not called anymore from module removal path, this
is unlikely to find timeouts give module refcount is bumped, and the new
refcount already tracks the ct timeout policy use so it is released when
unused. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
