| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. |
| A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795. |
| A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812. |
| A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002. |
| Cisco Sourcefire Snort 3.0 before build 233 mishandles Ether Type Validation. Since valid ether type and IP protocol numbers do not overlap, Snort++ stores all protocol decoders in a single array. That makes it possible to craft packets that have IP protocol numbers in the ether type field which will confuse the Snort++ decoder. For example, an eth:llc:snap:icmp6 packet will cause a crash because there is no ip6 header with which to calculate the icmp6 checksum. Affected decoders include gre, llc, trans_bridge, ciscometadata, linux_sll, and token_ring. The fix adds a check in the packet manager to validate the ether type before indexing the decoder array. An out of range ether type will raise 116:473. |
| A vulnerability in the forwarding component of Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series Routers could allow an authenticated, local attacker to cause the router to stop forwarding data traffic across Traffic Engineering (TE) tunnels, resulting in a denial of service (DoS) condition. More Information: CSCvd16665. Known Affected Releases: 6.2.11.BASE. Known Fixed Releases: 6.1.3 6.1.2 6.3.1.8i.BASE 6.2.11.8i.BASE 6.2.2.9i.BASE 6.1.32.11i.BASE 6.1.31.10i.BASE 6.1.4.3i.BASE. |
| The Cisco Umbrella Virtual Appliance Version 2.0.3 and prior contained an undocumented encrypted remote support tunnel (SSH) which auto initiated from the customer's appliance to Cisco's SSH Hubs in the Umbrella datacenters. These tunnels were primarily leveraged for remote support and allowed for authorized/authenticated personnel from the Cisco Umbrella team to access the appliance remotely and obtain full control without explicit customer approval. To address this vulnerability, the Umbrella Virtual Appliance version 2.1.0 now requires explicit customer approval before an SSH tunnel from the VA to the Cisco terminating server can be established. |
| A vulnerability in the Border Gateway Protocol (BGP) processing functionality of the Cisco StarOS operating system for Cisco ASR 5000 Series Routers and Cisco Virtualized Packet Core (VPC) Software could allow an unauthenticated, remote attacker to cause the BGP process on an affected system to reload, resulting in a denial of service (DoS) condition. This vulnerability affects the following products if they are running the Cisco StarOS operating system and BGP is enabled for the system: Cisco ASR 5000 Series Routers and Cisco Virtualized Packet Core Software. More Information: CSCvc44968. Known Affected Releases: 16.4.1 19.1.0 21.1.0 21.1.M0.65824. Known Fixed Releases: 21.3.A0.65902 21.2.A0.65905 21.1.b0.66164 21.1.V0.66014 21.1.R0.65898 21.1.M0.65894 21.1.0.66030 21.1.0. |
| A service provided by Zimbra Collaboration Suite (ZCS) before 8.7.6 fails to require needed privileges before performing a few requested operations. |
| Unspecified vulnerability in ASSA ABLOY APTUS Styra Porttelefonkort 4400 before A2 has unknown impact and attack vectors. |
| Rancher Labs rancher server 1.2.0+ is vulnerable to authenticated users disabling access control via an API call. This is fixed in versions rancher/server:v1.2.4, rancher/server:v1.3.5, rancher/server:v1.4.3, and rancher/server:v1.5.3. |
| The (1) update and (2) package-installation features in MODX Revolution 2.5.4-pl and earlier use http://rest.modx.com by default, which allows man-in-the-middle attackers to spoof servers and trigger the execution of arbitrary code by leveraging the lack of the HTTPS protection mechanism. |
| A privilege escalation in Fortinet FortiClient Windows 5.4.3 and earlier as well as 5.6.0 allows attacker to gain privilege via exploiting the Windows "security alert" dialog thereby popping up when the "VPN before logon" feature is enabled and an untrusted certificate chain. |
| NixOS 17.03 before 17.03.887 has a world-writable Docker socket, which allows local users to gain privileges by executing docker commands. |
| Novell iManager 2.7.x before 2.7 SP7 Patch 10 HF1 and NetIQ iManager 3.x before 3.0.3.1 have a webshell upload vulnerability. |
| In Veritas System Recovery before 16 SP1, there is a DLL hijacking vulnerability in the patch installer if an attacker has write access to the directory from which the product is executed. |
| Apache OpenMeetings 1.0.0 responds to the following insecure HTTP methods: PUT, DELETE, HEAD, and PATCH. |
| It was found that the Keycloak Node.js adapter 2.5 - 3.0 did not handle invalid tokens correctly. An attacker could use this flaw to bypass authentication and gain access to restricted information, or to possibly conduct further attacks. |
| rubygem-safemode, as used in Foreman, versions 1.3.2 and earlier are vulnerable to bypassing safe mode limitations via special Ruby syntax. This can lead to deletion of objects for which the user does not have delete permissions or possibly to privilege escalation. |
