| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg
ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check
in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT
endpoint size. Both are taken independently from different endpoints
in usbio_probe(), so the check is wrong when they differ.
Use rxbuf_len for the IN direction. This matches the buffer that
actually holds the response data. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Disable EOP for TPA on all chips to prevent data corruption
EOP (End of frame padding) on the AGG ring may cause overlapping of
zero padding at the end of one segment with the next segment's data.
If Relaxed Ordering (RO) is enabled, the zero padding may overwrite
valid data in the next segment and corrupt the data. Older chips
(P5 and older) do not automatically disable RO when EOP is enabled.
On some ARM systems, data corruption was reported on 57508 (P5)
chips with RO enabled.
Always disable EOP on all chips on the AGG rings when TPA is enabled
to fix the data corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems. |
| justhtml versions before 1.13.0 contain a cross-site scripting vulnerability in the to_markdown() function when serializing attacker-controlled pre content. Attackers can place backticks inside sanitized pre elements to break out of fixed-length code fences, allowing raw HTML to execute when the generated Markdown is rendered by CommonMark or GFM-style renderers. |
| Mitigation bypass in the Safe Browsing component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Mitigation bypass in the Storage: Cache API component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: use sk_msg_free_partial to fix partial send
sk_msg_free_partial() ensures consistency of the skmsg at every
iteration, without having to manually handle uncharges and offsets.
This simplifies the code, and fixes some bugs in skmsg accounting when
we don't send the full contents. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl: add bounds check in dfh_get_param_size()
dfh_get_param_size() can return a parameter size larger than the feature
region because the loop bounds check is evaluated before incrementing
size. If the EOP (End of Parameters) bit is set in the same iteration,
the inflated size is returned without re-validation against max.
This can cause create_feature_instance() to call memcpy_fromio() with a
size exceeding the ioremap'd region when a malicious FPGA device provides
crafted DFHv1 parameter headers.
Add a bounds check after the size increment to ensure the accumulated
size never exceeds the feature boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-control: Fix TOCTOU in sof_ipc4_bytes_put
In sof_ipc4_bytes_put(), the copy size is derived from the old
data->size in the buffer rather than the incoming new data's size
field from ucontrol. If the new data has a different size, the copy
uses the wrong length: it may truncate valid data or copy stale bytes.
Fix by validating and using the incoming data's sof_abi_hdr.size from
ucontrol before copying. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add a max slot check for SQ
The variable WQE mode must be validated against
the maximum slots supported by HW. The max supported
value is 64K. Adding a max and min check and fail if user
supplied value is more than the max supported and zero. |
| Capstone is a disassembly framework. In 6.0.0-Alpha9 and earlier, Capstone's arch/SH/SHDisassembler.c SH floating-point decoders such as opFADD, opFMUL, and opFSUB call set_reg() and set_reg_n() using sh_info.op.op_count without checking the fixed-size operands[] array. Repeated crafted instructions processed through cs_disasm_iter() or cs_disasm() with CS_ARCH_SH, CS_MODE_SH2A or CS_MODE_SH4A, CS_MODE_SHFPU, and CS_OPT_DETAIL can increment the operand count beyond the 176-byte sh_info allocation and perform a four-byte heap buffer overflow write. The corruption can crash the process and may enable code execution depending on heap layout. This issue is fixed in version 6.0.0-Alpha10. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: validate uCAN receive record lengths
pcan_usb_fd_decode_buf() walks uCAN records packed in one USB
receive buffer.
Require each record to contain the fixed header for its type, and verify
CAN payload bytes before copying them into the skb. |
| OctoPrint provides a web interface for controlling consumer 3D printers. Prior to 1.11.8 and 2.0.0rc3, Suppressed Command notification popups use PNotify rendering for printer-controlled payload.command and payload.message values in src/octoprint/static/js/app/viewmodels/terminal.js without HTML escaping. An attacker who convinces a victim to print a crafted file can inject HTML and JavaScript into the notification, disrupt prints, read information available to the victim including sensitive settings when permitted, or perform actions in the victim's OctoPrint session. This issue is fixed in versions 1.11.8 and 2.0.0rc3. |
| Snipe-IT before 8.6.0 contains an authorization bypass (insecure direct object reference) in the asset checkout-request cancellation endpoint. The cancel_by_admin and requestingUser values are read from user-controlled URL path segments and used without a server-side authorization check, so any authenticated, low-privileged user can supply a non-empty cancel_by_admin value to bypass the request-ownership check and cancel another user's pending checkout request. Because asset and user identifiers are sequential integers, an attacker can enumerate them to cancel every pending checkout request, disrupting the asset-request workflow. This is fixed in Snipe-IT 8.6.0. |
| AngleSharp is a .NET library for parsing angle bracket based hyper-texts. Prior to 1.5.0, MathAnnotationXmlElement in AngleSharp/Mathml/Dom/Internal/MathAnnotationXmlElement.cs is not treated as an HTML integration point when its encoding attribute is text/html or application/xhtml+xml, causing Consume in AngleSharp/Html/Parser/HtmlDomBuilder.cs to route tokens through foreign-content parsing instead of HTML parsing. A sanitizer can therefore observe a different DOM from the browser that reparses the serialized output. An attacker can combine this namespace differential with markup-breaking characters in an attribute value so that an element hidden from the sanitizer becomes active script-capable HTML after browser reparse, resulting in mutation cross-site scripting. This issue is fixed in version 1.5.0. |
| Maps is a MediaWiki extension that enables visualization of geographic data through dynamic embedded maps. Prior to version 12.1.3, the display_map parser function in the Leaflet service accepts attacker-controlled HTML in the overlays parameter, and resources/leaflet/jquery.leaflet.js uses the overlay name as a Leaflet layer-control label without escaping it. A wiki user with the edit permission can store malicious wikitext that causes script execution when another user previews or views the affected map. The script executes in the viewing user's browser session and can access data or perform actions available to that user. This issue is fixed in version 12.1.3. |
| Mitigation bypass in the Add-ons Manager component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| CVAT is an open source interactive video and image annotation tool for computer vision. From 2.68.0 until 2.70.0, the audio-task annotation guide renderer in cvat-ui/src/audio/components/annotation-page/audio-workspace/top-bar/audio-right-group.tsx passes attacker-controlled guide Markdown to MDEditor without the rehype-sanitize plugin. A user who can create or edit an annotation guide can store malicious JavaScript that executes when another user opens the guide. The script can issue arbitrary CVAT requests with the victim user's privileges. This issue is fixed in version 2.70.0. |
| BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to 0.31.1, a custom frontend could place an invalid SecurityMode value in a crafted build request, and executor/oci/spec_linux.go treated the unsupported value as a non-sandbox mode without requiring the security.insecure entitlement. This disabled Seccomp and AppArmor protections for the build container even though Linux capabilities remained restricted. This issue is fixed in version 0.31.1. |
| A vulnerability in the web-based management interface of Cisco Industrial Ethernet (IE) 1000 Series Switches could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of another user. To exploit this vulnerability, the attacker must have valid user credentials on the affected system. |
