| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: disable the stats poll on teardown
mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and
nothing stops it until dsa_register_switch() has returned an error to
mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a
poll that fires once .setup or a later step of dsa_tree_setup() has
failed walks freed ports. On shutdown the user ports stay registered,
and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic
with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag
before it was set queues the poll after cancel_delayed_work_sync() has
returned.
Arm the poll once .setup has succeeded and stop it from a .teardown op,
which DSA calls on unregister and after a failed registration, in both
cases before it frees the ports. Use disable_delayed_work_sync() there
and in shutdown(): it drains a running poll as the cancel did and turns
every later attempt to queue the work into a no-op, so the re-arm
cannot bring the poll back. remove() and the probe error path only set
WORK_STOPPED, which crc_err_work tests before it walks the ports. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
__xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM
reference. Shrinking a bo outside system memory invalidates its GPU
mappings, which needs the device resumed, so while it is runtime
suspended the page table zap trips an assert and the TLB invalidation
returns -ENODEV:
WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe]
xe_bo_shrink+0x20f/0x2b0 [xe]
__xe_shrinker_walk+0x174/0x410 [xe]
xe_shrinker_scan+0x10c/0x1e0 [xe]
do_shrink_slab+0x176/0x7e0
drop_caches_sysctl_handler+0x9c/0xf0
Take a reference before walking a memory type other than XE_PL_SYSTEM
and stop there if it cannot be acquired. Reuse the shrinker's existing
acquire path, which resumes the device directly where reclaim allows
that and otherwise queues the PM worker for a later scan. Stop the walk
once the scan target is met, so a satisfied scan does not wake the
device. System memory is still reclaimed while the device is suspended.
Gate this on xe_device_is_l2_flush_optimized(), the same condition under
which xe_bo_trigger_rebind() issues the invalidation for a non-fault-mode
vm, so reclaim is unaffected elsewhere. The System CCS copy already has
its own reference in xe_bo_shrink().
Only a non-fault-mode vm can reach this, since a fault-mode vm requires
LR mode and that holds a runtime PM reference for the vm's lifetime.
Reproduced with igt@xe_madvise@dontneed-before-exec while the GPU is
runtime suspended.
v2: simplify needs_rpm check. (Matt)
retarget Fixes tag since the issue occurs with the non-fault-mode
path added by 4e7ebff69aed.
v3: handle this in xe_shrinker.c instead of xe_bo.c (Thomas)
v4: stop the walk once the scan target is met. (Sashiko)
v5: rebase on the freed page accounting fix. (Sashiko)
v6: reuse the shrinker acquire path so runtime pm can be resumed
directly instead of always queueing a worker. (Thomas)
v7: replace xe_pm_runtime_put() with xe_shrinker_runtime_pm_put(). (Thomas)
(cherry picked from commit 628f92b28bf4c371c10207daf6fc4caee0c0db2e) |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix handling of NFSEXP_PNFS in the netlink codepath
The rework of how block layouts were checked moved the check for
NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That
patch didn't account for the new call in nfsd4_setup_layout_type(). |
| The Insurify WordPress plugin through 1.0 does not have authorisation and nonce checks on one of its AJAX actions, allowing unauthenticated users to create and overwrite arbitrary WordPress options with request data, which can take the site offline and deactivate all of its Insurify WordPress plugin through 1.0. |
| pH7Builder (pH7 Social Dating CMS) before 19.3.0 contains a CAPTCHA bypass vulnerability that allows unauthenticated attackers to skip form validation by supplying a client-chosen form ID to PFBC Form::isValid(). Attackers can load a CAPTCHA-free form like login or search, then submit its ID with contact, comment, forum, invite or signup data to automate abuse. |
| pH7Builder (pH7 Social Dating CMS) before 18.5.0 contains an information disclosure vulnerability that allows API clients to obtain sensitive member data because UserController::users() and user() return unfiltered database rows. Attackers holding a valid private API key can retrieve bcrypt password hashes, non-expiring hashValidation reset tokens, and TOTP secrets to take over accounts and bypass two-factor authentication. |
| Several Postiz endpoints return the complete database row of the record they operate on instead of only the fields the client needs. Two of them include secrets the caller is not meant to receive.
The public API's channel delete returns the deleted integration row, including the channel's platform access token and refresh token. A third-party OAuth app permitted to delete a channel therefore receives that channel's social platform credentials and can use them against the connected account directly, outside Postiz.
`GET /user/organizations` returns each organization row, including its API key, to every member of the organization. The API key is intended for admins only, so a member with a lower role can obtain it and call the public API on behalf of the organization.
Both endpoints require a valid session, API key or OAuth token and are scoped to the caller's own organization. There is no anonymous access and no cross-tenant exposure. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in the SysCommentController exportXls handler that allows any authenticated user to export all comments. Low-privileged attackers can request /sys/comment/exportXls to download every sys_comment row, including comment text and user ids on records they cannot access. |
| pH7Builder (pH7 Social Dating CMS) before 18.6.0 contains a hard-coded API key vulnerability in Tool.class.php that allows unauthenticated attackers to bypass API access checks by spoofing the Host header. Attackers can send Host: localhost with private_api_key=dev772277 and the default allowed URL to retrieve member emails, IP addresses, phone numbers, and bank account fields. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: coredump: Quiesce dump work on unregister
hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers
queue dump_rx without holding an hdev reference. Unregister leaves both
works live, so disconnecting during an active dump lets them access hdev
after hci_release_dev() frees it.
Shut down coredump processing during unregister. Close the producer gate
under dump_q.lock before disabling both works, then free the active buffer
and queued packets under hci_dev_lock. Serializing the gate with enqueue
prevents controller-specific workers from adding packets after the final
purge. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use drmm_kms_helper_poll_init() so polling is finalized with the device,
as other drivers do. |
| The WooCommerce Bookings WordPress plugin before 3.11.0 does not limit a user-supplied value before using it to allocate memory in one of its unauthenticated AJAX actions, allowing unauthenticated attackers to exhaust server memory and cause a Denial of Service with a single request. |
| The click5 CRM add-on to Ninja Forms WordPress plugin through 1.0.1 does not have authorisation and CSRF checks when updating options via a REST endpoint, and does not ensure that the option to be updated belongs to the click5 CRM add-on to Ninja Forms WordPress plugin through 1.0.1. As a result, unauthenticated attackers could change arbitrary blog options, allowing them to create a new administrator account and take over the site. |
| The click5 CRM add-on to WPForms WordPress plugin through 1.0.3 does not have authorisation and CSRF checks when updating options via a REST endpoint, and does not ensure that the option to be updated belongs to the click5 CRM add-on to WPForms WordPress plugin through 1.0.3. As a result, unauthenticated attackers could change arbitrary blog options, allowing them to create a new administrator account and take over the site. |
| The click5 CRM add-on to Gravity Forms WordPress plugin through 1.0.3 does not have authorisation and CSRF checks when updating options via a REST endpoint, and does not ensure that the option to be updated belongs to the click5 CRM add-on to Gravity Forms WordPress plugin through 1.0.3. As a result, unauthenticated attackers could change arbitrary blog options, allowing them to create a new administrator account and take over the site. |
| The click5 CRM add-on to Contact Form 7 WordPress plugin through 1.0.4 does not have authorisation and CSRF checks when updating options via a REST endpoint, and does not ensure that the option to be updated belongs to the click5 CRM add-on to Contact Form 7 WordPress plugin through 1.0.4. As a result, unauthenticated attackers could change arbitrary blog options, allowing them to create a new administrator account and take over the site. |
| The MemberHero WordPress plugin through 6.9 does not perform any capability or nonce check on one of its AJAX actions, allowing any authenticated user, such as a subscriber, to make the site send arbitrary HTML emails to arbitrary recipients from its own mail system, which can be abused to relay phishing carrying the site's identity and domain reputation. |
| The Envira Gallery WordPress plugin before 1.16.2 does not verify that a user holds the capability WordPress reserves for installing Envira Gallery WordPress plugin before 1.16.2 code before processing its setup-wizard Envira Gallery WordPress plugin before 1.16.2-installation request, and does not restrict the installation to its own curated list, allowing a Multisite subsite Administrator to install an arbitrary WordPress.org-published Envira Gallery WordPress plugin before 1.16.2 into the network-shared Envira Gallery WordPress plugin before 1.16.2 directory, a privilege Multisite reserves for the network Super Admin. |
| The WeddingCity Lite WordPress plugin through 1.0.4 does not perform any authorisation or validity checks before deleting posts, pages and media attachments, allowing unauthenticated attackers to permanently delete arbitrary content site-wide. |
