| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Microsoft Windows Speech allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Windows BitLocker allows an authorized attacker to elevate privileges over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Fix unmatched rn_unregister on failed accept
When svc_rdma_accept() takes the errout path before
rpcrdma_rn_register() has succeeded, the existing cleanup block
calls rpcrdma_rn_unregister(dev, &newxprt->sc_rn) unconditionally.
svcxprt_rdma is kzalloc'd, so on that path sc_rn.rn_index is 0 and
sc_rn.rn_done is NULL; the unregister therefore xa_erase()s another
caller's slot 0 and performs an unmatched kref_put() on the
rpcrdma_device's rd_kref.
The same errout also brackets the cleanup with svc_xprt_get()/
svc_xprt_put() around the kref_init() birth reference. The kref
goes 1 -> 2 -> 1 and never reaches 0, so the svcxprt_rdma (and the
net/ns_tracker it pinned) is leaked on every failed accept.
rpcrdma_rn_register() writes rn->rn_done last, only after xa_alloc()
and kref_get() have both succeeded, so rn_done == NULL is a natural
"never registered" sentinel. Guard rpcrdma_rn_unregister() with an
early return when rn_done is NULL, and clear rn_done before the
matching xa_erase() so a repeated unregister is also a no-op.
With that guard in place, the accept errout drops the kref_init()
birth reference via svc_xprt_put(), which dispatches svc_rdma_free().
Teardown of sc_qp, sc_sq_cq, sc_rq_cq, and sc_pd runs under existing
IS_ERR/NULL guards in svc_rdma_free(); sc_rn is covered by the new
rn_done sentinel; sc_cm_id is non-NULL on every errout path because
svc_rdma_accept() dereferences it above the first goto errout.
svc_xprt_free() drops the module reference associated with the freed
transport, and svc_handle_xprt() drops its pre-acquired reference
when ->xpo_accept() returns NULL. Take a replacement module reference
before svc_xprt_put() so the two module_put()s remain balanced.
The rn_done guard also covers svc_rdma_free()'s non-listener call
to rpcrdma_rn_unregister() for transports whose register attempt
failed or never ran. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5-ppl: fix use-after-free in ppl_do_flush()
The loop in ppl_do_flush() continues iterating after calling
ppl_io_unit_finished(), touching io->pending_flushes and leading to a
use-after-free.
Add a break statement to stop the loop once io is freed. |
| Out-of-bounds read vulnerability in Altera Trusted Firmware on HPS allows Privilege Escalation and Overflow Buffers.
This issue affects Trusted Firmware: through socfpga_v2.14.0. |
| Out-of-bounds read vulnerability in Altera Trusted Firmware on HPS allows Privilege Escalation and Overflow Buffers.
This issue affects Trusted Firmware: through socfpga_v2.14.0. |
| Untrusted pointer dereference vulnerability in Altera Trusted Firmware on HPS allows Exploitation of Improperly Configured or Implemented Memory Protections.
This issue affects Trusted Firmware: through socfpga_v2.14.0. |
| Stack-based buffer overflow vulnerability in Altera Trusted Firmware on HPS allows Exploitation of Improperly Configured or Implemented Memory Protections.
This issue affects Trusted Firmware: through socfpga_v2.14.0. |
| The Zero Spam for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Nested POST Array Keys via Contact Form 7 Integration in all versions up to, and including, 5.7.10 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload is delivered by submitting a Contact Form 7 request with a nested POST array key containing arbitrary HTML or JavaScript — PHP parses the field name into a nested array key, which is stored verbatim in the zerospam_log.submission_data column when Zero Spam flags the submission as spam due to the absence of the zerospam_david_walsh_key field. |
| The Premium Packages – Sell Digital Products Securely plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'cart_items[][product_name]' Parameter in all versions up to, and including, 7.2.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The checkout REST route uses permission_callback set to __return_true and the invoice loader performs no order ownership check, meaning an unauthenticated attacker can both persist the payload and ensure it is renderable to any logged-in user who accesses the invoice. |
| The Fancy Product Designer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'productTitle' in '_fpd_data' Order Item Meta in all versions up to, and including, 6.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The fpd_save_order AJAX action is registered for unauthenticated users via wp_ajax_nopriv_fpd_save_order with no nonce or capability check, and the strip_tags() sanitization applied at save time is bypassed by submitting JSON unicode escape sequences (e.g. \u003c, \u003e), which json_decode() silently converts back to literal angle brackets when the order is rendered in the admin view. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: move quota_init qc iterator increment
Move qc++ from the loop body into the for-loop increment
expression in gfs2_quota_init().
This keeps iterator progression explicit and avoids mixing pointer
advance with duplicate-slot handling in the loop body. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_flush()
vxlan_mdb_flush() iterates over the MDB entries using
hlist_for_each_entry_safe(), which only tolerates the removal of the
current entry. Contrary to the comment above the loop, the removal of an
entry can trigger the removal of another entry.
Flushing the remotes of a (*, G) entry also removes the (S, G) entries
that were created for its source list, once they are left without
remotes:
vxlan_mdb_remotes_flush()
-> vxlan_mdb_remote_del()
-> vxlan_mdb_remote_srcs_del()
-> vxlan_mdb_remote_src_del()
-> vxlan_mdb_remote_src_fwd_del()
-> __vxlan_mdb_del()
-> vxlan_mdb_entry_put()
Such an entry can be located after the (*, G) entry in the list, as
vxlan_mdb_entry_get() returns an existing entry without moving it to the
head of the list. This order is obtained by adding the (S, G) entry
before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition
of the source otherwise fails with -EEXIST. The (S, G) entry is then the
entry saved by hlist_for_each_entry_safe() and it is freed while the
(*, G) entry is processed. The next iteration calls hlist_del() on it
again, writing LIST_POISON1 to LIST_POISON2 [1].
Besides device deletion, the flush is also reachable from RTM_DELMDB
with NLM_F_BULK.
Fix by re-reading the next entry after the remotes were flushed. The
current entry cannot be removed by this flush, as source lists can only
be configured on (*, G) entries and the removed entries are (S, G)
entries. It is therefore still linked and its next pointer reflects the
removals.
[1]
BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588
Write of size 8 at addr dead000000000122 by task ip/327
CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT
Call trace:
vxlan_mdb_entry_put.part.0+0x328/0x588
vxlan_mdb_flush+0x1d8/0x25c
vxlan_mdb_fini+0x8c/0x100
vxlan_uninit+0x1c/0x7c
unregister_netdevice_many_notify+0x954/0xd4c
rtnl_dellink+0x210/0x530
rtnetlink_rcv_msg+0x434/0x4d0
netlink_rcv_skb+0xc4/0x204
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x548
netlink_sendmsg+0x29c/0x560
____sys_sendmsg+0x390/0x3ec
___sys_sendmsg+0x114/0x188
__sys_sendmsg+0xf0/0x178
__arm64_sys_sendmsg+0x48/0x60
invoke_syscall.constprop.0+0x58/0x180
el0_svc_common.constprop.0+0x74/0x140
do_el0_svc+0x30/0x40
el0_svc+0x38/0x98
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node
DSP3 has an integrated Ethernet MAC Endpoint which has its own set of
config registers for configuring settings such as ASPM. The Endpoint device
has two physical functions and those two functions share the same settings.
Parse the Endpoint node under DSP3 instead of parsing both functions. The
existing parsing logic also has one OOB issue as parsing both functions
will result in accessing past the tc9563_pwrctrl->cfg array. |
| redis-parser through 3.0.0 fails to validate the multi-bulk length value in RESP protocol parsing, allowing attackers to trigger an uncaught RangeError by supplying an excessively large declared length. A malicious or compromised Redis endpoint can deliver a crafted RESP header with a length above 2^32-1 to crash the Node.js client process. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: audio: bound the topology section sizes against the fetched size
gb_audio_gb_get_topology() fetches a topology blob of a module-supplied
size, and gbaudio_tplg_parse_data() then walks it by adding the
module-supplied size_dais, size_controls and size_widgets fields to
form the control, widget and route section offsets. Those le32 sizes
are never checked against the fetched blob, so a module reporting a
small topology size but large section sizes makes the offsets point
past the allocation, and parsing reads out of bounds.
Reject a topology whose section sizes do not fit within the fetched
size before it is parsed. |
| TREK is a collaborative travel planner. Prior to 3.3.0, TREK allows an authenticated user to store an attacker-controlled llm_base_url through the settings API when the LLM_PARSING feature is enabled. Write permission to the target trip instance is required to trigger the vulnerable AI-assisted import path. The value is consumed by the clients in server/src/nest/llm-parse/clients/openai-compatible.client.ts, server/src/nest/llm-parse/clients/anthropic.client.ts, and server/src/nest/llm-parse/router/ollama-format.client.ts without applying the server-side request forgery guard. Triggering AI-assisted trip parsing causes the server to request the supplied destination, and upstream error response text can be returned in parsing warnings. This permits internal service discovery and access to link-local cloud metadata, with possible disclosure of infrastructure credentials and subsequent modification of protected cloud resources. This issue is fixed in version 3.3.0. |
| TREK is a collaborative travel planner. Prior to 3.3.0, the DELETE /api/trips/:tripId/collab/notes/:noteId/files/:fileId endpoint authorizes an authenticated user against the attacker-controlled tripId but deleteNoteFile in server/src/services/collabService.ts resolves the target only by note and file identifiers without requiring the file to belong to that trip. A user with edit access to any trip can submit identifiers belonging to another user's trip and permanently delete that note-file attachment. Sequential identifiers make broad targeting practical, while attachment read operations remain trip-scoped and are not affected. This issue is fixed in version 3.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Validate udata before executing commands
The destroy callbacks currently zero the udata output after tearing down
driver resources. If the userspace access fails, uverbs preserves the
uobject and allows the destroy callback to run again, even though the
driver resource has already been freed.
Call ib_no_udata_io() before teardown so udata failures are detected
while the resource is still intact, then return success after teardown
completes.
As part of this change, move ib_respond_empty_udata() to the start of
the create and modify flows. While this is not strictly required for
general create flows, as the core layer unwinds uobjects on failure, it
is necessary for create AH. In _rdma_create_ah(), the HW object is
otherwise leaked. |
| An integer overflow in the BSON document encoding component of the MongoDB Python Driver's bundled native extension may occur when a single document is built from an unusually large amount of caller-supplied data. Size arithmetic is performed in a signed 32-bit type, and the guard meant to catch the overflow is written in a form whose behavior is not defined by the C language standard. A party with no privileges who can place a very large value into data that an application encodes may, depending on how the native extension was built, cause a write outside the bounds of an allocated buffer inside the application's own process. |
