| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: restore RX state on reload failure
lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before
reallocating the RX resources for the new MTU. If the allocation fails,
the restore path puts these fields back before restarting RX.
However, the reload path also updates rx->page_order and rx->max_mtu
before calling lan966x_fdma_rx_alloc(). These fields are not restored on
failure, so RX can be restarted with the old pages, old FDMA state and
old page pool, but with the page geometry from the failed new MTU.
This can make the XDP path advertise a frame size derived from the new
page_order while the actual RX pages still come from the old allocation.
For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be
called with a frame size larger than the restored RX pages.
lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page
pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If
fdma_alloc_coherent() fails, the new page pool is destroyed, but the
rollback path does not restore the per-port XDP RXQ mem model
registration either.
Save and restore rx->page_order and rx->max_mtu, and restore the old page
pool registration for each port's XDP RXQ before RX is started again.
This keeps the restored RX state consistent after a failed reload. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: protect sb_write_pointer() with invalidate lock
sb_write_pointer() reads the super block from the block device page cache
using read_cache_page_gfp(). This has the same race with BLKBSZSET as the
one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set
block size").
Take the mapping invalidate lock around read_cache_page_gfp() to
serialize the read against block size changes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: unregister devlink on port registration failure
cpsw_probe() registers devlink before registering the CPSW ports.
If cpsw_register_ports() fails, the error path only unregisters the
notifiers and then releases the lower level resources. It does not undo
the successful cpsw_register_devlink() call, leaving the devlink instance
and its parameters registered after probe has failed.
Add a devlink cleanup label for the path where devlink registration has
already succeeded, and use it when port registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
If kfd_dbg_trap_enable() fails while copying runtime_info to userspace,
it had already activated the trap, set debug_trap_enabled, taken an extra
process reference, and opened the debug event file. Return -EFAULT without
unwinding that state, leaving inconsistent trap state and a refcount
imbalance that could break later DISABLE/ENABLE.
On copy_to_user failure, deactivate the trap and undo the rest of the
enable setup before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Reject reads that cannot fit the next event
snd_seq_oss_read() checks whether the next queued OSS sequencer event
fits in the remaining userspace buffer before removing it from the read
queue.
The check is inverted. It currently stops when the event is smaller than
the remaining buffer, so a normal 4-byte event is not copied for an
8-byte read buffer. Conversely, an 8-byte event can be copied for a
smaller read count.
Break only when the remaining userspace buffer is smaller than the next
event, and report -EINVAL if no complete event has been copied. This
prevents an undersized read from looking like end-of-file while leaving
the event queued for a later read with a large enough buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Don't access cpuset_cgrp_subsys.root in is_in_v2_mode()
After seeing the patch [1] to guard is_in_v2_mode() with RCU, it makes
me realize that is_in_v2_mode() may be called in a context where a new
cgroup filesystem is being rebound with stale cpuset_cgrp_subsys.root
pointer. Avoid this potential UaF situation by adding a new cpuset_v2_mode
flag which is set when the cpuset_v2_mode mount option is used. This
flag is written into only when cpuset_bind() is being called with a
stable cpuset_cgrp_subsys.root value. The is_in_v2_mode() helper is
modified to read the new cpuset_v2_mode flag instead of accessing
cpuset_cgrp_subsys.root directly.
[1] https://lore.kernel.org/lkml/20260929084124.626693-2-arighi@nvidia.com |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: account non-AQL frames per peer rather than per link
The driver increments wcid->non_aql_packets when a frame goes to the
hardware queue. The completion path decrements the counter again.
For an MLO peer, the hardware reports the completion on the link that it
used for the transmission. This link can differ from the link that the
driver queued the frame on. In that case, the increment and the
decrement go to different link wcids, and the count drifts upwards until
it blocks the station.
Keep the count on the wcid of the primary link, like the other peer-wide
state. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't stash io_uring encoded data across -EAGAIN
Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU
leaks if the request is cancelled or the ring exits before reissue.
io_uring does not free driver PDU allocations on cleanup.
Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so
return -EAGAIN before allocating and free data on every exit.
Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation
for btrfs_uring_read_finished(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: unlock inode and extent in caller when io_uring read extent fails
btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken
the inode shared lock and the extent lock. On failure it used to unlock
in out_fail, and a pages-array allocation failure returned -ENOMEM
without unlocking at all.
Unlock in the caller instead on all failure returns, matching the
copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks
in btrfs_uring_read_finished(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio
If all bios finish before btrfs_encoded_read_regular_fill_pages()
returns, it calls btrfs_uring_read_extent_endio() and previously
returned the I/O status. A negative errno then made
btrfs_uring_read_extent() unlock and free while
btrfs_uring_read_finished() did the same again.
Return -EIOCBQUEUED so only the deferred path cleans up. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix the program leak when XDP is replaced
We need to release the reference on the old BPF prog, whether
we are going to no-prog, or replacing the prog with another.
Spotted by AI while running tests for the propagation series
(leaked programs were accumulating). Selftest will come in
the net-next series to avoid conflicts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Free the BO cache size list on teardown
vc4_bo_cache_destroy() purges the cached BOs but never frees the size
list, leaking it on every unbind. |
| Integer overflow or wraparound in Windows iSCSI allows an unauthorized attacker to execute code over a network. |
| Key exchange without entity authentication in the EMR SSH helper commands in Amazon AWS CLI before 1.45.28 and AWS CLI v2 before 2.35.3 might allow man-in-the-middle attackers to intercept SSHsessions and file transfers via network positioning between the client and the EMR cluster endpoint.
To remediate this issue, users should upgrade to AWS CLI v1 1.45.28 or later, or AWS CLI v2 2.35.3 or later. |
| Overly permissive file permissions in AWS CLI before 1.44.78 (v1) and 2.34.29 (v2) on Unix-like systems where the umask has not been configured to restrict file permissions (the default on most systems) may allow other local users on the same host to read credentials written by certain CLI subcommands (aws codeartifact login, aws iam create-virtual-mfa-device, aws deploy register).
To remediate this issue, users should upgrade to AWS CLI 1.44.78 (v1) or 2.34.29 (v2) or later. |
| Server-side request forgery in the model download path in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to send requests to internal network destinations via a crafted model URL.
Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution. |
| Relative path traversal during model archive extraction in Amazon Web Services Multi Model Server 1.1.11 and earlier might allow remote actors to execute arbitrary code via a crafted model archive.
Multi Model Server is end of life and no fixed version is available. Users should discontinue use of Multi Model Server and migrate to a supported model serving solution. |
| Visual Studio Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: use vb2_video_unregister_device on driver removal
The driver uses vb2_fop_release() as its file release operation, so
vb2_video_unregister_device() should be used instead of
video_unregister_device() during driver removal.
This ensures that the vb2 queue is properly disconnected before the
video device is unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix UAF in ovl_do_mkdir() debug print
ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir().
Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on
failure."), vfs_mkdir() calls end_creating() on the input dentry on
failure and may replace it on success, so the post-call %pd can
use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled.
Print the dentry before the call and only the result afterward. |
