| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched/isolation: Defer freeing of cpumask memblock memory to initcall
When testing a linux-next kernel with commit 59bd1d914bb5 ("memblock:
warn when freeing reserved memory before memory map is initialized"),
the following warning was hit when there was a "nohz_full" kernel boot
parameter.
Cannot free reserved memory because of deferred initialization of the memory map
WARNING: mm/memblock.c:904 at __free_reserved_area+0xde/0xf0, CPU#0: swapper/0/0
:
Call Trace:
<TASK>
memblock_phys_free+0xcb/0x100
housekeeping_init+0x14c/0x170
start_kernel+0x207/0x450
x86_64_start_reservations+0x24/0x30
x86_64_start_kernel+0xda/0xe0
common_startup_64+0x13e/0x141
</TASK>
IOW, we shouldn't free memblock allocated memory so early
in the boot process when memory map isn't fully initialized in
deferred_init_memmap().
Fix it by saving the housekeeping cpumask memblock memory to be
freed into a llist free list in housekeeping_init() and add a new
housekeeping_late_init() helper to defer the actual freeing of memblock
memory to when initcall's are being processed. The cpumask memblock
memory is treated as a llist_node with the size of a "long" type which
is also smallest cpumask size that can be allocated.
The non-atomic version of the llist APIs are used as there is no
contention.
This commit depends on the presence of commit 7c2eee9c1367 ("memblock:
don't touch memblock arrays when memblock_free() is called late")
to prevent a KASAN UAF bug report [1].
[1] https://lore.kernel.org/lkml/20260505051821.1107133-1-longman@redhat.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
block: handle nogenerate/noverify properly in fs-integrity
Check the BIP_CHECK flags before generating or verifying PI information,
otherwise this can be incorrectly called for non-PI metadata and
cause generation of incorrect metadata and crashed in the verification
handler.
The new behavior matches that of the block layer auto-generated
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/irq: Fix missing r2 clobber in PCREL inline assembly
In CONFIG_PPC_KERNEL_PCREL mode, r2 is no longer reserved for the TOC
pointer and is available as a caller-saved register [0].
Both call_do_irq() and call_do_softirq() use inline assembly to call
functions with stack switching, but fail to list r2 in their clobber
lists. This causes the compiler to assume r2 is preserved across these
calls, leading to register corruption when the called functions
(__do_irq and __do_softirq) clobber r2.
As a result of this kernel crash during interrupt handling is seen and
the kernel fails to boot:
BUG: Unable to handle kernel data access on write at 0xc000000404697638
Faulting instruction address: 0xc0000000000181ec
Oops: Kernel access of bad area, sig: 11 [#1]
NIP [c0000000000181ec] __do_IRQ+0x6c/0xc0
With older GCC, the compiler would conservatively allocate
callee-saved registers (like r31) for values spanning function calls,
accidentally avoiding the bug:
<__do_IRQ>:
00 00 00 60 nop
a6 02 08 7c mflr r0
f8 ff e1 fb std r31,-8(r1)
f0 ff c1 fb std r30,-16(r1)
2d 03 10 06 pla r31,53297316
...
3d e8 ff 4b bl c0000000000165ac <__do_irq>
00 00 21 e8 ld r1,0(r1)
28 00 4d e9 ld r10,40(r13)
40 00 21 38 addi r1,r1,64
2a f9 aa 7f stdx r29,r10,r31
With newer GCC 14, the compiler uses r2 for such values, exposing the
missing clobber specification:
<__do_IRQ>:
00 00 00 60 nop
a6 02 08 7c mflr r0
f0 ff c1 fb std r30,-16(r1)
f8 ff e1 fb std r31,-8(r1)
29 02 10 06 pla r2,36252592 # c0000000022aadc0 <__irq_regs>
...
85 dc ff 4b bl c000000000015ee0 <__do_irq>
00 00 21 e8 ld r1,0(r1)
28 00 2d e9 ld r9,40(r13)
30 00 21 38 addi r1,r1,48
2a 11 c9 7f stdx r30,r9,r2
Fix this by adding r2 to the clobber list for both call_do_irq() and
call_do_softirq() when CONFIG_PPC_KERNEL_PCREL is enabled.
[0]: https://www.mail-archive.com/gcc-patches@gcc.gnu.org/msg313226.html |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/xive: propagate IPI init errors to prevent use-after-free
When xive_init_ipis() fails (e.g. irq_domain_alloc_irqs() fails),
the error path frees the global xive_ipis array. However,
xive_smp_probe() previously ignored this failure and proceeded to
call xive_setup_cpu_ipi(), which dereferences the already-freed
xive_ipis pointer -- a use-after-free.
Now that xive_smp_probe() returns int (previous patch), propagate
the error from xive_init_ipis() and xive_setup_cpu_ipi() through
xive_smp_probe(). Check the return value in both pnv_smp_probe()
and pSeries_smp_probe() so that IPI setup is aborted cleanly on
failure, avoiding the use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node
DSP3 has an integrated Ethernet MAC Endpoint which has its own set of
config registers for configuring settings such as ASPM. The Endpoint device
has two physical functions and those two functions share the same settings.
Parse the Endpoint node under DSP3 instead of parsing both functions. The
existing parsing logic also has one OOB issue as parsing both functions
will result in accessing past the tc9563_pwrctrl->cfg array. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: bcm2835: Don't remove an unregistered GPIO chip
If the devm_pinctrl_register() function fails,
bcm2835_pinctrl_probe() calls gpiochip_remove()
before gpiochip_add_data() has registered the GPIO chip.
This means that upon failure the gpio_chip.gpiodev
is NULL resulting in a null pointer dereference
inside the gpiochip_remove() function.
Remove the unnecessary function call to gpiochip_remove().
No GPIO cleanup is required because the GPIO chip
has not yet been registered. Without this change there
is potential for a kernel panic upon registration failure |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown
The TX cleanup tasklet can be scheduled by the watchdog IRQ handler
to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in
the queue which might run after the cvm_oct_remove() frees net_device
structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it
iterates cvm_oct_device[] which is an array of netdevice pointers.
Add tasklet_kill() after free_irq() to ensure the tasklet is no longer
scheduled or running before teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: audio: bound the topology section sizes against the fetched size
gb_audio_gb_get_topology() fetches a topology blob of a module-supplied
size, and gbaudio_tplg_parse_data() then walks it by adding the
module-supplied size_dais, size_controls and size_widgets fields to
form the control, widget and route section offsets. Those le32 sizes
are never checked against the fetched blob, so a module reporting a
small topology size but large section sizes makes the offsets point
past the allocation, and parsing reads out of bounds.
Reject a topology whose section sizes do not fit within the fetched
size before it is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: do not use make_bad_inode() in ocfs2_read_inode_block_full()
This reverts commit 58b6fcd2ab34 ("ocfs2: mark inode bad upon validation
failure during read").
Since 'make_bad_inode()' resets inode type to S_IFREG, doing this for
directory inode during active VFS lookup is likely to confuse the latter,
including VFS_BUG_ON_INODE() triggered in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: skip extra isize expansion during mount to prevent deadlock
ext4_try_to_expand_extra_isize() is called from __ext4_mark_inode_dirty()
while holding an active jbd2 handle. During mount (!SB_ACTIVE), the
expand path may move xattrs to external blocks and release ea_inodes via
iput(). When !SB_ACTIVE, iput() calls write_inode_now() which acquires
s_writepages_rwsem, creating a circular lock dependency:
s_writepages_rwsem --> jbd2_handle --> xattr_sem --> s_writepages_rwsem
This can be triggered via:
ext4_process_orphan() -> ext4_truncate() -> ext4_mark_inode_dirty()
-> ext4_try_to_expand_extra_isize()
or:
ext4_evict_inode() -> ext4_mark_inode_dirty()
-> ext4_try_to_expand_extra_isize()
Skip expansion when !SB_ACTIVE. This is a minor loss of functionality
(extra isize won't grow for these inodes during mount), which e2fsck
can resolve later if needed. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Validate udata before executing commands
The destroy callbacks currently zero the udata output after tearing down
driver resources. If the userspace access fails, uverbs preserves the
uobject and allows the destroy callback to run again, even though the
driver resource has already been freed.
Call ib_no_udata_io() before teardown so udata failures are detected
while the resource is still intact, then return success after teardown
completes.
As part of this change, move ib_respond_empty_udata() to the start of
the create and modify flows. While this is not strictly required for
general create flows, as the core layer unwinds uobjects on failure, it
is necessary for create AH. In _rdma_create_ah(), the HW object is
otherwise leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: policy_int make sure list heads are initialized before fail path
If profile create fails before policy_init is complete the list heads
are not properly initialized causing profile_free() sanity checks to
trigger the following splat.
AppArmor WARN aa_policy_destroy: (((!list_empty(&policy->profiles) && (&policy->profiles)->prev != ((void *) 0x122 + (0xdead000000000000UL))))):
WARNING: security/apparmor/lib.c:509 at aa_policy_destroy+0x164/0x1b0 security/apparmor/lib.c:509, CPU#0: syz.0.17/5541
Modules linked in:
CPU: 0 UID: 0 PID: 5541 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:aa_policy_destroy+0x16b/0x1b0 security/apparmor/lib.c:509
Code: 85 ed 7e 4d e8 96 bc 37 fd 5b 41 5c 41 5e 41 5f 5d e9 19 27 4e 07 cc e8 83 bc 37 fd 48 8d 3d 0c f0 d3 0b 48 c7 c6 a4 eb 38 8e <67> 48 0f b9 3a e9 04 ff ff ff e8 66 bc 37 fd 48 8d 3d ff ef d3 0b
RSP: 0018:ffffc9000345eaa0 EFLAGS: 00010293
RAX: ffffffff848f530d RBX: ffff88803f734800 RCX: ffff88801af2a580
RDX: 0000000000000000 RSI: ffffffff8e38eba4 RDI: ffffffff90634320
RBP: 0000000000000000 R08: 0000000000000cc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d95913 R12: dead000000000122
R13: ffff88803f734800 R14: ffff88803f734828 R15: dffffc0000000000
FS: 00007f5f6a1836c0(0000) GS:ffff88808c519000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d02407b048 CR3: 0000000012aa9000 CR4: 0000000000352ef0
Call Trace:
<TASK>
aa_free_profile+0x9d/0x9f0 security/apparmor/policy.c:334
aa_alloc_profile+0x1e4/0x3e0 security/apparmor/policy.c:416
unpack_profile security/apparmor/policy_unpack.c:1153 [inline]
aa_unpack+0x17db/0x7430 security/apparmor/policy_unpack.c:1748
aa_replace_profiles+0x226/0x2a20 security/apparmor/policy.c:1183
policy_update+0x234/0x4a0 security/apparmor/apparmorfs.c:505
profile_load+0x1cb/0x320 security/apparmor/apparmorfs.c:522
vfs_write+0x296/0xba0 fs/read_write.c:685
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f6939e0d9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5f6a183028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f5f69625fa0 RCX: 00007f5f6939e0d9
RDX: 0000000000000041 RSI: 0000200000000400 RDI: 0000000000000003
RBP: 00007f5f6a183090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007f5f69626038 R14: 00007f5f69625fa0 R15: 00007ffe23725c18 |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix out-of-bounds read setting MSI-X irq affinity
rvu_register_interrupts() walks every MSI-X vector and uses strstr()
to match "Mbox" or "FLR" in irq_name before pinning those interrupts
to CPU 0. irq_name is a per-vector NAME_SIZE buffer, but not every
slot is populated before this loop runs. strstr() keeps scanning until
it finds a NUL terminator, so an uninitialized slot can trigger a KASAN
slab-out-of-bounds read at boot when debug options are enabled.
Use strnstr() with NAME_SIZE to bound the search within each vector's
name buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator
devm_regulator_get_exclusive() initialises the regulator with
enable_count = 1, requiring the consumer to disable it before release.
The devm disable action was previously only registered when the caller
explicitly requested enable, so when the regulator was left in its initial
enabled state without an explicit enable call, the cleanup path skipped
decrementing enable_count, triggering a WARN_ON during regulator
release on device removal.
Fix this by always registering the devm disable action based on the actual
enabled state via regulator_is_enabled(), regardless of whether the
caller requested an explicit enable. This covers both the explicitly
enabled case and the initial state set by devm_regulator_get_exclusive(). |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add DIRECT_MAP_PHYSMEM_END definition
get_free_mem_region() and mhp_get_pluggable_range() bound their search
to DIRECT_MAP_PHYSMEM_END. LoongArch does not define it, so the fallback
in include/linux/mm.h applies: under CONFIG_SPARSEMEM_VMEMMAP it is
(1ULL << MAX_PHYSMEM_BITS) - 1, a compile-time constant that does not
adapt to the CPU's physical address space bits (cpu_pabits, probed from
CPUCFG1).
The vmemmap window only covers physical space below 2^(cpu_pabits+1)
(i.e. VMEMMAP_SIZE), so on CPUs with fewer physical address bits than
MAX_PHYSMEM_BITS the fallback allows get_free_mem_region() to return
a ZONE_DEVICE region outside the vmemmap window; vmemmap_populate() then
wraps the memmap range around and maps it into low memory, silently
corrupting the page tables. The same search also picked the top-of-
address-space region that crashed memmap_init_zone_device() with amdkfd
on Loongson-3C6000 in 6.16 [1]; the commit 2969b42c8f99 ("LoongArch/mm:
align vmemmap to maximal folio size") keeps that region in bounds on
current Loongson-3C6000 configs, but CPUs with smaller cpu_pabits (e.g.
the Loongson-2K series) are still affected.
Define DIRECT_MAP_PHYSMEM_END as the vmemmap-covered physical range,
(1ULL << (cpu_pabits + 1)) - 1, capped at (1ULL << MAX_PHYSMEM_BITS) - 1
under CONFIG_SPARSEMEM, similar to the commit f3336b48cf9d ("riscv: mm:
Define DIRECT_MAP_PHYSMEM_END").
[1] https://lore.kernel.org/amd-gfx/20250814032153.227285-1-jeffbai@aosc.io/ |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: make sure EXTENT_BUFFER_READING is cleared under refs_lock
[FALSE ALERTS]
There is a bug report that the warning inside
invalidate_and_check_btree_folios() got triggered during btrfs/298:
BTRFS info (device sdd): first mount of filesystem f9bf732a-a19b-44b9-99a7-614ddff168e2
BTRFS info (device sdd): using crc32c checksum algorithm
BTRFS error (device sdd): failed to find fsid cb2fdb42-b638-4f2f-badd-4127467ba674 when attempting to open seed devices
BTRFS error (device sdd): failed to read chunk tree: -2
------------[ cut here ]------------
WARNING: disk-io.c:3342 at invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs], CPU#4: mount/125993
CPU: 4 UID: 0 PID: 125993 Comm: mount Tainted: G W OE 7.1.0-rc7-custom+ #1 PREEMPT(full)
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025
Call trace:
invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs] (P)
open_ctree+0x1f50/0x23b0 [btrfs]
btrfs_get_tree+0x89c/0xc48 [btrfs]
vfs_get_tree+0x30/0x110
vfs_cmd_create+0x58/0xe8
__arm64_sys_fsconfig+0x39c/0x518
invoke_syscall.constprop.0+0x48/0x120
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x50/0x310
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
---[ end trace 0000000000000000 ]---
BTRFS warning (device sdd): unable to release extent buffer 365985792 owner 3 gen 17 refs 3 flags 0x5
[CAUSE]
In that invalidate_and_check_btree_folios() we wait for the eb to finish
its read, then check if it's only held by us and the btree inode.
If not, then do a warning as it may be still held, and could cause
problems.
But there is a small window where the check can lead to false alerts:
Thread A (Read endio) | Thread B (Unmount)
----------------------------------+-------------------------------------
end_bbio_meta_read() |
| The eb has one extra ref held |
| by the reader, and has |
| EXTENT_BUFFER_READING flag set | invalidate_and_check_btree_folios()
| | |
|- clear_extent_buffer_reading() | |
| | |- wait_on_bit_io();
| | | The EXTENT_BUFFER_READING flag is
| | | cleared
| | |- if (refcount_read(eb->refs) > 2)
| | The eb is held by the read, us
| | and btree inode, thus it
| | will trigger the warning
|- free_extent_buffer() |
[FIX]
Introduce a helper, free_extent_buffer_clear_reading().
If the new parameter, @clear_reading, is set, we will hold the spinlock
at the beginning of free_extent_buffer_clear_reading() to make sure the
EXTENT_BUFFER_READING flag is cleared inside the same critical section
of decreasing refs.
Now free_extent_buffer() will just call
free_extent_buffer_clear_reading() with @clear_reading set to false, so
no behavior change.
But for end_bbio_meta_read(), it will not clear_extent_buffer_reading()
directly, but pass @clear_reading as true.
Then inside invalidate_and_check_btree_folios(), hold the refs_lock
before reading refs.
So that we eliminate the race window completely. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: Fix the lockless page-table walk in show_pte()
show_pte() walks page tables locklessly and can run with interrupts
enabled. A concurrent teardown can free a table page while it is being
walked. It can also clear a parent entry after show_pte() checked it; the
regular pXd_offset() helpers then reread the cleared entry and can derive a
bogus lower-level pointer and fault again.
Use the lockless offset helpers with the saved parent entries, as
gup_fast() does, and pass the saved PMD to pte_offset_map().
For task page tables, arm64 selects MMU_GATHER_RCU_TABLE_FREE. Disable
local interrupts around the walk to hold off RCU-deferred table frees and
block the tlb_remove_table_sync_one() IPI until the walk is finished.
Place the IRQ guard after the header print. This does not make the output a
consistent snapshot, but prevents the task page-table walk from
dereferencing a released table page or deriving a pointer from a different
parent value. |
| In the Linux kernel, the following vulnerability has been resolved:
signal: avoid shared siginfo namespace rewrites
send_signal_locked() rewrites sender ids for the target namespace. Group
sends reuse the same siginfo, so one recipient can affect the next.
Copy the siginfo before changing it. |
| Adobe Campaign Classic (ACC) is affected by an Improper Control of Generation of Code ('Code Injection') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| Adobe Campaign Classic (ACC) is affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. |
