| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer
rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by
tile_info->tile_cols and writes one descriptor per tile into the tile_info
DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows
come from the bitstream. Guard the division against a zero tile_cols by
initialising the context-update values to zero and computing them only
when tile_cols is non-zero, and stop the descriptor writes once the
tile_info buffer is full. The tile geometry written to the hardware
registers is left unmodified; the per-dimension and total tile bounds are
enforced by the control validation. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity
rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry
array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows
entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info
buffer, and programs the real tile_cols / tile_rows into the hardware.
The tile group entry control is a dynamic array sized to the number of
entries userspace submitted, independent of tile_cols / tile_rows, so a
frame that claims more tiles than entries reads past the array. A frame
that claims more than AV1_MAX_TILES tiles also leaves the hardware
programmed for more tiles than the descriptor buffer holds.
Reject both in prepare_run(): tile_cols * tile_rows must not exceed the
submitted entry count or AV1_MAX_TILES. The entry count is read via
v4l2_ctrl_find() (ctrl->elems). This mirrors the bound the mediatek AV1
decoder already enforces. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate HEVC tile counts
The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from
column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[]
and use them as tile-loop bounds, but std_validate_compound() does not
bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling
enabled whose tile counts exceed the uAPI array capacity, mirroring the
existing compound-control range checks. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-ctrls: validate AV1 tile counts
The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop
bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[]
arrays, as the divisor for context_update_tile_id, and their product
bounds the per-tile descriptor buffers, but std_validate_compound() does
not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose
tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose
product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the
consuming driver so the zero-initialised control that existing userspace
submits is still accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle buffer allocation failure in bnxt_rx_ring_reset()
bnxt_rx_ring_reset() frees the ring buffers and then reallocates them,
ignoring the result.
bnxt_alloc_one_rx_ring() can fail in bnxt_alloc_one_tpa_info_data(), which
returns -ENOMEM on the first failed allocation and leaves the remaining
rxr->rx_tpa[] entries zeroed.
The error isn't propagated up, so the loop in bnxt_rx_ring_reset
continues and at the end the code re-enables TPA with partially
unallocated rx_tpa array.
This means that when the agg_id from hardware is mapped to a SW index in
rxr->rx_tpa[], an uninitialized slot can be chosen which would hand a
zero DMA address to the device.
Fix this by falling back to a global reset, which is what the existing
code already does when other functions fail, but unlike the other
failure cases this particular failure has to return because TPA can't
be re-enabled since the allocation failed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: pin DFS superblock in iterator callback
tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super()
takes its active reference only after iterate_supers_type() has dropped
s_umount and its passive reference. Concurrent DFS automount expiry can
therefore free the superblock before cifs_sb_active() uses it.
A deterministic KASAN test reproduces the race as:
BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80
The same test passes with this change applied.
Take the active reference in the callback while iterate_supers_type()
still holds s_umount shared. cifs_put_tcp_super() remains the matching
release. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid unneeded actions on subflow reset
Once in a blue moon, the mptcp receive path can recursively call
mptcp_data_ready() via state change under unlucky error conditions, and
then try to hold the data lock again.
Break the recursion loop explicitly checking for the exceptional
condition.
Add a new flag instead of using an existing one like 'closing', to exit
early in subflow_state_change(), and explicitly flush the RX queue at
reset time.
This avoids unneeded processing to check for available data -- calling
get_mapping_status() and more on a dying subflow -- but also in error
reporting and worker scheduling.
Note that we must consume the currently peeked skb before invoking
mptcp_dss_corruption to avoid consuming it again after the eventual
reset has freed it. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: close race between scheduler and state change
The mptcp scheduler may race with subflow sockets state change: data
transmission on the selected socket may fail and a later release could
try to use mss_now reset to 0 for a divide operation.
Address the issue by explicitly checking for the critical scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep XDomain reference during the lifetime of a service
This is needed because we release the service ID in tb_service_release()
and the ID array is owned by the parent XDomain. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Set tb->root_switch to NULL when domain is stopped
Similarly what we do with the firmware connection manager. This makes
tb_xdp_handle_request() return error to the remote host. However, we
need to make sure we keep the uuid alive so that we can reply until the
whole domain is released. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix OOB memory exposure in get_wave_state()
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR
pointers).
Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated
buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the
clamped size before performing arithmetic and copy_to_user().
This ensures we never read beyond the allocated kernel BO regardless of
attacker-supplied MQD field values. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on allocate_doorbell
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: filter RDS_INFO_* getsockopt by caller's netns
The RDS_INFO_* family of getsockopt(2) options reads several
file-scope global lists that are not per-netns:
rds_sock_info / rds6_sock_info,
rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list
rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list
rds_conn_info / rds6_conn_info,
rds_conn_message_info_cmn (for the *_SEND_MESSAGES and
*_RETRANS_MESSAGES variants),
rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS)
-> rds_conn_hash[]
The handlers do not filter by the caller's network namespace.
rds_info_getsockopt() has no netns or capable() check, and
rds_create() has no capable() check, so AF_RDS is reachable from
an unprivileged user namespace. As a result, an unprivileged
caller in a fresh user_ns plus netns can read the bound address
and sock inode of every RDS socket on the host, the peer address
of incoming messages on every RDS socket on the host, the peer
address and TCP sequence numbers of every rds-tcp connection on
the host, and the peer address and RDS sequence numbers of every
RDS connection on the host.
The rds-tcp transport is reachable from a non-initial netns (see
rds_set_transport()), so a one-shot init_net gate at
rds_info_getsockopt() would deny legitimate per-netns visibility
to rds-tcp callers. Instead, filter at each handler by comparing
the netns of the caller's socket to the netns of the list entry,
or to rds_conn_net(conn) for connection paths. Only copy entries
whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are
aggregate statistics and remain global.
Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket
binds 127.0.0.1:4242 in init_net as root. A child process enters
a fresh user_ns plus netns and opens AF_RDS there, then calls
getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the
child sees the init_net socket. After this change, the child
sees zero entries.
Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count
globals. v2 used them for the size precheck and lens->nr; v3
replaced the precheck with a per-ns count from a first pass over
the list, so the globals have no remaining readers. The matching
increments and decrements in rds_create()/rds_destroy_sock() and
rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with
them. Reported by the kernel test robot under clang W=1. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix use-after-free in acpi_ds_terminate_control_method()
Fix use-after-free issue in acpi_ds_terminate_control_method() by
clearing references to method locals and arguments. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: add boundary checks in acpi_ps_get_next_field()
Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Prevent adding invalid references
Prevent adding references for local, argument, and debug objects
in acpi_ut_copy_simple_object(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix integer overflow in acpi_ex_opcode_3A_1T_1R() (mid_op)
Add overflow check for Index + Length to prevent integer overflow
when calculating the truncation length. This prevents negative
size parameter being passed to memcpy(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: validate handler object type in two places
ACPICA: validate handler object type in acpi_ev_has_default_handler()
and acpi_ev_find_region_handler(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add validation for node in acpi_ns_build_normalized_path()
Add validation for node in acpi_ns_build_normalized_path()
to prevent use-after-free vulnerabilities. |
