| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped
Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force
vCPUs to reload/recheck their guest-provided VMSA if the backing gmem
page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core
logic to handle invalidations as VMX does for the APIC-access page, as the
two concepts are nearly identical: shove the physical address of a page
into the vCPU's control structure:
1. Snapshot the invalidation sequence counter
2. Grab the pfn (from guest_memfd in this case)
3. Acquire mmu_lock for read
4. Re-request reload if retry is needed, otherwise commit the change.
Note, the re-request action in #4 is necessary as KVM's retry logic is
fuzzy, i.e. can get false positives. If the guest_memfd page has been
dropped, at some point a subsequent reload will fail to get a PFN from
guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false
positive, KVM will retry until there are no relevant MMU notifier events
(and will retry in the "outer" loop, i.e. will drop locks and resched as
needed).
Note #2! Take care to invalidate the VMSA when a relevant memslot is
DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated
on memslot bindings (KVM doesn't know what GFN range(s) to invalidate
without a binding). And more importantly, the VMSA mapping requires a
memslot, i.e. must be invalidated if its memslots disappears, regardless of
the state of the underlying guest_memfd inode.
Failure to invalidate the vCPU's control.vmsa_pa (which is checked by
pre_sev_run()) can prevent KVM from properly freeing the page as firmware
will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU
is actively running, i.e. if VMSA page is in-use. That in turn leads to an
RMP #PF on the next use, as the page will still be assigned to the SNP VM.
SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3
SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f]
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
Call Trace:
<TASK>
dump_stack_lvl+0x54/0x70
rmpupdate+0x12c/0x140
rmp_make_shared+0x3b/0x60
sev_gmem_invalidate+0xe0/0x170 [kvm_amd]
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
------------[ cut here ]------------
SEV: Failed to update RMP entry for PFN 0x78d198 error -14
WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd]
Call Trace:
<TASK>
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
irq event stamp: 20689
hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60
hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60
softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
---[ end trace 0000000000000000 ]---
BUG: unable to handle page fault for address: ffff99
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-its: Don't dereference a NULL collection on ITT save
MAPC with V=0 drops ite->collection but leaves the ITE on the device's
ITT list, and vgic_its_save_ite() dereferences it unconditionally. A
guest that issues MAPD, MAPTI and then MAPC(V=0) therefore oopses the
host when the VMM issues KVM_DEV_ARM_ITS_SAVE_TABLES to migrate it.
That sequence is UNPREDICTABLE per the architecture, but KVM already
handles the resulting state in the translate, MOVI and DISCARD paths.
Save a zeroed entry, which vgic_its_restore_ite() reads back as
invalid. Skipping the ITE instead would leave the ITT slot holding
whatever is in guest memory, and restore rejects an entry naming a
collection the restored collection table does not have. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Validate MSI data before routing it to EIOINTC
pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as
the irq number. The MSI data comes from userspace, that either via a
KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd
and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked
against EIOINTC_IRQS.
eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the
256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and
the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value
>= 256 reads and writes memory past the end of those arrays, i.e. any
process holding a VM fd can corrupt kernel memory beyond the allocation
of loongarch_eiointc.
Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC
path is unaffected as it decodes the vector from the address and masks
it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Resume device before setting EOS flag
Setting the EOS flag talks to the firmware via send_firmware_command(),
which accesses VPU registers. Both the STREAMOFF path
(wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path
(wave5_vpu_dec_stop()) can run while the device is runtime suspended, so
those register accesses hit powered-down hardware and the SoC raises an
asynchronous SError, panicking the kernel:
SError Interrupt on CPU3, code 0x00000000bf000000 -- SError
send_firmware_command+0x2c/0x160 [wave5]
wave5_vpu_dec_set_bitstream_flag+0x6c/0x80 [wave5]
wave5_vpu_dec_update_bitstream_buffer+0x80/0xec [wave5]
wave5_vpu_dec_job_abort+0x44/0xa0 [wave5]
v4l2_m2m_cancel_job+0x110/0x19c [v4l2_mem2mem]
v4l2_m2m_streamoff+0x24/0x140 [v4l2_mem2mem]
Resume the device with pm_runtime_resume_and_get() around the EOS
firmware command and release it with pm_runtime_put_autosuspend(),
matching the runtime PM handling already done in
wave5_vpu_dec_device_run(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the KIQ ring fences on reset
Like the MES scheduler ring, the KIQ ring sets no_scheduler = true and uses a
polling fence, so it is skipped by the force-completion loop in
amdgpu_device_pre_asic_reset(). Its hw fence value lives in wb (GTT) memory and
survives a MODE1 reset while fence_drv.sync_seq keeps advancing, so after a
reset the first KIQ submission can poll forever on a seq that is never written
back.
Force complete the KIQ ring fences too so their hw fence is realigned to
sync_seq. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the MES ring fences on reset
The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is
skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses
a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1
reset, while fence_drv.sync_seq keeps advancing for every packet.
When the reset is triggered because MES itself stopped responding, the
timed-out packets advance sync_seq past the last hw fence value MES wrote.
After resume the first MES submission polls forever on a seq that is never
written back, failing the resume and wedging the box on a second reset:
amdgpu: MES ring buffer is full.
amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110)
amdgpu: resume of IP block <gfx_v11_0> failed -110
amdgpu: GPU reset end with ret = -110
Force complete the MES scheduler ring fences together with the scheduler rings
so their hw fence is realigned to sync_seq.
v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in writeback_store()
Patch series "zram: fix stale scan bounds after reinitialization".
Both writeback_store() and read_block_state() derive their table scan
bounds from zram->disksize before acquiring dev_lock. If the device is
reset and reinitialized with a smaller disksize between that read and lock
acquisition, the bound can describe the old table while the scan operates
on the new one. This can lead to out-of-bounds slot accesses.
Move both bound calculations under dev_lock so each bound remains
consistent with the table throughout its scan. Keep the fixes separate
because the affected interfaces originate from different commits and can
be backported independently.
This patch (of 2):
writeback_store() calculates the table scan bounds before taking dev_lock.
A reset followed by reconfiguration with a smaller disksize can therefore
replace zram->table while writeback_store() is waiting for the lock. Once
it acquires the lock, it sees an initialized device but scans the new
table using the old upper bound, resulting in an out-of-bounds access.
Calculate the number of pages while holding dev_lock so the scan bound
matches the table protected by the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd, nfsd: RCU-protect nlmsvc_ops dispatch
nlmsvc_ops is published by nfsd_lockd_init() and cleared by
nfsd_lockd_shutdown() with plain stores, while lockd dereferences
it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer
targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's
.text, so a stale load after rmmod nfsd results in either a NULL
deref or a module-text use-after-free.
Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear
via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module
*owner field to nlmsvc_binding and pin the module across indirect
calls with try_module_get/module_put. When the binding is torn down,
fall back to fput() to avoid leaking struct file references. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths
nfsd_dispatch() sets rq_status_counter to an odd value once a request has
been decoded, and back to an even value once it has been fully processed,
forming a seq-lock like protocol with the lockless reader in
nfsd_nl_rpc_status_get_dumpit().
Only the fully successful path restored the counter to even. The cache-hit
(RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return
after the odd-valued store without ever bringing the counter back to even.
Once one of those paths is taken, rq_status_counter is left odd: the next
request's decode ORs in 1 (still odd) and only a subsequent successful
encode restores even. While stuck odd, the dumpit reader treats the rqstp
fields as stable and its retry check compares against the same unchanging
odd value, so it never detects concurrent mutation. This exposes actively
mutating fields (e.g. args->ops / args->opcnt during compound decode and
release) to the lockless reader, which can read past the end of the
8-element inline ops array.
Add a helper that advances the counter to the next even value and call it
on every return path that follows the odd-valued store. The decode-error
path is left untouched as it is reached before the counter is set odd. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in check_new_map() on session freed during unlock
check_new_map() iterates mdsc->sessions[] and for each active session
drops mdsc->mutex to perform per-session operations. The forced-close
path (rank removed from map) correctly takes a reference on s via
ceph_get_mds_session() before releasing mdsc->mutex, but three other
paths do not:
Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex)
Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s)
Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex)
Without the extra reference, another thread can acquire mdsc->mutex
during the unlock window, call __unregister_session() which drops the
last reference on s, and free it. The original thread then accesses
freed memory via s->s_mutex.
Fix by adding ceph_get_mds_session(s) before each mutex_unlock and
ceph_put_mds_session(s) after the corresponding mutex_lock, matching
the pattern already used in the forced-close path.
Race timeline (Path A):
Thread A (check_new_map) Thread B (another map update
holds mdsc->mutex or session teardown)
-------------------------- --------------------------
s = mdsc->sessions[i]
(refcount == 1, held only by
sessions[] array)
mutex_unlock(&mdsc->mutex)
---> acquires mdsc->mutex
__unregister_session(mdsc, s)
sessions[i] = NULL
ceph_put_mds_session(s)
refcount: 1 -> 0
kfree(s) <--- freed!
mutex_lock(&s->s_mutex)
UAF on freed s->s_mutex |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: call pagecache_isize_extended() in cifs_setsize() when extending
cifs_setsize() calls truncate_pagecache() but skips
pagecache_isize_extended() on extension. truncate_setsize() shows
the correct pattern:
i_size_write(inode, newsize);
if (newsize > oldsize)
pagecache_isize_extended(inode, oldsize, newsize);
truncate_pagecache(inode, newsize);
pagecache_isize_extended() zeroes the tail of the page straddling old
EOF. Without it, dirty bytes in that region can be written back to
the server, exposing stale data in the newly extended range. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions
When a file has the setuid or setgid bit set and is written to, the VFS
strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID
together with an ATTR_MODE carrying the already-cleared mode.
Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped
ATTR_MODE in that case:
/* skip mode change if it's just for clearing setuid/setgid */
if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
attrs->ia_valid &= ~ATTR_MODE;
This is fine for the default mount, where the mode is only emulated via
the DOS read-only attribute and cannot represent the setuid/setgid bits
anyway. However, with the "cifsacl" or "modefromsid" mount options the
mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with
the SMB3.1.1 POSIX extensions the mode is sent to the server directly,
and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent
via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means
the cleared mode is never pushed to the server, so the setuid/setgid bit
survives the write.
This is a security issue: on local filesystems the setuid bit is stripped
when a file is written, but over these cifs.ko mounts the bit persists on
the server, potentially allowing an unexpected privilege escalation on
subsequent execution.
Fix this in two places:
1. cifs_setattr_nounix(): only take the "skip mode change" shortcut
when the mode is emulated via the DOS read-only attribute (i.e.
neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are
in effect), so that the cleared mode is propagated to the server
in the ACL / POSIX cases.
2. cifs_setattr_unix(): this function is only called when Unix
extensions are in effect, so the mode is always stored on the
server. Remove the shortcut entirely so that the cleared mode is
always pushed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2()
coalesce_t2() computes data pointers directly from server-supplied
DataOffset fields with no validation against buffer bounds:
data_area_of_tgt = (char *)&pSMBt->hdr.Protocol +
get_unaligned_le16(&pSMBt->t2_rsp.DataOffset);
data_area_of_src = (char *)&pSMBs->hdr.Protocol +
get_unaligned_le16(&pSMBs->t2_rsp.DataOffset);
data_area_of_tgt += total_in_tgt;
...
memcpy(data_area_of_tgt, data_area_of_src, total_in_src);
A small DataOffset can push a pointer below the actual byte area,
overwriting header fields; a large one can push it past the buffer
end, causing out-of-bounds heap reads (source) or writes (target).
The BCC overflow guard does not prevent this: BCC reflects how much
data is present, while DataOffset controls where in the buffer it
starts.
The "validate target area" comment present since the function was
first written in 2005 was a placeholder that was never implemented.
Add lower- and upper-bound checks for both data pointers before the
memcpy, and before any target header fields are modified. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Fix lost inode updates for IS_SYNC inodes
ext2_setsize() and ext2_xattr_set2() had a construct like:
if (IS_SYNC(inode)) {
sync_inode_metadata(inode, 1);
} else {
mark_inode_dirty(inode);
}
which leads to lost inode updates for IS_SYNC inodes because
sync_inode_metadata() does anything only if the inode is already dirty
and hence inode updates may be simply lost. Fix the problem by
unconditionally marking the inode dirty and *then* call
sync_inode_metadata(). |
| In the Linux kernel, the following vulnerability has been resolved:
kho: fix size calculation in kho_preserved_memory_reserve()
kho_preserved_memory_reserve() calculates the size of a preservation by
doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it
can only be shifted by 31. That is, it will only work for preservations
up to 2 GiB. Larger preservations will trigger undefined behaviour.
While preservations larger than 2 GiB can't be obtained via folios
currently, they can be obtained via kho_preserve_pages().
For example, memblock reserve_mem uses kho_preserve_pages().
Reservations larger than 2 GiB are valid and will trigger this bug if
properly aligned.
Fix it by using 1UL for shifting. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Reject short RFC 4121 MIC tokens in gss_krb5_verify_mic_v2
gss_krb5_verify_mic_v2() reads the token ID at ptr[0..1], the flags
byte at ptr[2], and padding at ptr[3..7], then passes
ptr + GSS_KRB5_TOK_HDR_LEN and cksum_len to gss_krb5_mic_build_sg().
None of these accesses check read_token->len first.
The minimum safe token size is GSS_KRB5_TOK_HDR_LEN (16) plus
ctx->krb5e->cksum_len (12-24, depending on the enctype). All callers
accept shorter tokens from the wire:
- gss_unwrap_resp_integ() enforces only an upper bound
(offset + len <= rcv_buf->len) before allocating
mic.data = kmalloc(len) and passing it to gss_verify_mic().
A malicious NFS server can therefore supply a short checksum
opaque, producing a small slab allocation that the Kerberos MIC
verifier reads past.
- gss_validate() enforces only len <= RPC_MAX_AUTH_SIZE (400)
before passing the wire-supplied length to
gss_validate_seqno_mic(), which constructs a mic xdr_netobj
and calls gss_verify_mic().
- svcauth_gss_verify_header() enforces only
checksum.len >= XDR_UNIT (4 bytes) before dispatching to
gss_verify_mic().
- svcauth_gss_unwrap_integ() checks only that the checksum fits
in gsd->gsd_scratch.
Add a length guard at the top of gss_krb5_verify_mic_v2(), before any
ptr[] access or scatterlist construction. Well-formed MIC tokens from
gss_krb5_get_mic_v2() already have exactly GSS_KRB5_TOK_HDR_LEN +
cksum_len bytes, so valid traffic is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails
When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE,
it creates a replacement listener cm_id and returns 1, telling
the CM core to destroy the old one. If the replacement allocation
fails, sc_cm_id still points at the old cm_id that the CM core is
about to destroy. Any subsequent dereference of sc_cm_id --
such as svc_rdma_detach()'s rdma_disconnect() call -- is a
use-after-free.
NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s
rdma_disconnect() call against NULL so that the listener can
be torn down safely when the server shuts down. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Use svc_xprt_put to free listener on create failure
svc_rdma_create() calls kfree(cma_xprt) when
svc_rdma_create_listen_id() fails. svc_xprt_init() has already
acquired a net namespace reference via get_net_track(); kfree
bypasses svc_xprt_free() which releases it.
Replace the kfree() with svc_xprt_put() so the kref_init birth
reference drops to zero and svc_xprt_free() dispatches
svc_rdma_free() to clean up properly. sc_cm_id is still NULL
at that point; the preceding patch added the necessary NULL
guard in svc_rdma_free().
svc_xprt_free() also drops the module reference via
module_put(), but the caller _svc_xprt_create() does the same
on xpo_create failure, double-putting the single
try_module_get() it acquired. Take a compensating
__module_get() before the svc_xprt_put() to keep the count
balanced, matching the convention in svc_rdma_accept()'s error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Fix PMU event info array size overflow
SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo)
in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010
truncate to 16. KVM then allocates one entry but loops over the original
num_events, causing out-of-bounds reads and writes. A nested guest
triggered:
BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
Read of size 4 at addr ff600000074d46b0 by task init/1
Call Trace:
[<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
[<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268
[<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6
[<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540
[<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80
Allocated by task 1:
__kmalloc_noprof+0x19e/0x4b0
kvm_riscv_vcpu_pmu_event_info+0x72/0x142
kvm_sbi_ext_pmu_handler+0xca/0x268
kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6
kvm_riscv_vcpu_exit+0x48c/0x540
kvm_arch_vcpu_ioctl_run+0x37e/0xc80
The buggy address is located 0 bytes to the right of
allocated 16-byte region [ff600000074d46a0, ff600000074d46b0)
Store the shared-memory size in size_t and reject multiplication overflow.
Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged
to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings.
Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index
to match num_events. |
| The Fast Courier WordPress plugin before 5.2.4 does not sanitize and escape a value before using it in a SQL query on an unauthenticated REST route, allowing unauthenticated attackers to perform SQL injection and read arbitrary data from the database. |
