| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Information Disclosure can occur in Hitek Software's Automize 10.x and 11.x passManager.jsd. Users have the Read attribute, which allows an attacker to recover the encrypted password to access the Password Manager. |
| In all Qualcomm products with Android releases from CAF using the Linux kernel, insecure ciphersuites were included in the default configuration. |
| The executable httpd on the TP-Link WR841N V8 router before TL-WR841N(UN)_V8_170210 contained a design flaw in the use of DES for block encryption. This resulted in incorrect access control, which allowed attackers to gain read-write access to system settings through the protected router configuration service tddp via the LAN and Ath0 (Wi-Fi) interfaces. |
| Apache Hadoop before 0.23.4, 1.x before 1.0.4, and 2.x before 2.0.2 generate token passwords using a 20-bit secret when Kerberos security features are enabled, which makes it easier for context-dependent attackers to crack secret keys via a brute-force attack. |
| On the TP-Link TL-SG108E 1.0, admin network communications are RC4 encoded, even though RC4 is deprecated. This affects the 1.1.2 Build 20141017 Rel.50749 firmware. |
| A Weak Cryptography for Passwords issue was discovered in General Electric (GE) Multilin SR 750 Feeder Protection Relay, firmware versions prior to Version 7.47; SR 760 Feeder Protection Relay, firmware versions prior to Version 7.47; SR 469 Motor Protection Relay, firmware versions prior to Version 5.23; SR 489 Generator Protection Relay, firmware versions prior to Version 4.06; SR 745 Transformer Protection Relay, firmware versions prior to Version 5.23; SR 369 Motor Protection Relay, all firmware versions; Multilin Universal Relay, firmware Version 6.0 and prior versions; and Multilin URplus (D90, C90, B95), all versions. Ciphertext versions of user passwords were created with a non-random initialization vector leaving them susceptible to dictionary attacks. Ciphertext of user passwords can be obtained from the front LCD panel of affected products and through issued Modbus commands. |
| A "Reusing a Nonce, Key Pair in Encryption" issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1100 programmable-logic controllers 1763-L16AWA, Series A and B, Version 16.00 and prior versions; 1763-L16BBB, Series A and B, Version 16.00 and prior versions; 1763-L16BWA, Series A and B, Version 16.00 and prior versions; and 1763-L16DWD, Series A and B, Version 16.00 and prior versions and Allen-Bradley MicroLogix 1400 programmable logic controllers 1766-L32AWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWAA, Series A and B, Version 16.00 and prior versions; 1766-L32BXB, Series A and B, Version 16.00 and prior versions; 1766-L32BXBA, Series A and B, Version 16.00 and prior versions; and 1766-L32AWAA, Series A and B, Version 16.00 and prior versions. The affected product reuses nonces, which may allow an attacker to capture and replay a valid request until the nonce is changed. |
| Dolibarr ERP/CRM 4.0.4 stores passwords with the MD5 algorithm, which makes brute-force attacks easier. |
| PGP/MIME encrypted messages injected into a Vaultive O365 (before 4.5.21) frontend via IMAP or SMTP have their Content-Type changed from 'Content-Type: multipart/encrypted; protocol="application/pgp-encrypted"; boundary="abc123abc123"' to 'Content-Type: text/plain' - this results in the encrypted message being structured in such a way that most PGP/MIME-capable mail user agents are unable to decrypt it cleanly. The outcome is that encrypted mail passing through this device does not work (Denial of Service), and a common real-world consequence is a request to resend the mail in the clear (Information Disclosure). |
| The default SSH configuration in Rapid7 Nexpose hardware appliances shipped before June 2017 does not specify desired algorithms for key exchange and other important functions. As a result, it falls back to allowing ALL algorithms supported by the relevant version of OpenSSH and makes the installations vulnerable to a range of MITM, downgrade, and decryption attacks. |
| Due to a lack of standard encryption when transmitting sensitive information over the internet to a centralized monitoring service, the Eview EV-07S GPS Tracker discloses personally identifying information, such as GPS data and IMEI numbers, to any man-in-the-middle (MitM) listener. |
| An issue was discovered in the software on Vaultek Gun Safe VT20i products. There is no encryption of the session between the Android application and the safe. The website and marketing materials advertise that this communication channel is encrypted with "Highest Level Bluetooth Encryption" and "Data transmissions are secure via AES256 bit encryption." These claims, however, are not true. Moreover, AES256 bit encryption is not supported in the Bluetooth Low Energy (BLE) standard, so it would have to be at the application level. This lack of encryption allows an individual to learn the passcode by eavesdropping on the communications between the application and the safe. |
| Citrix NetScaler Application Delivery Controller (ADC) and NetScaler Gateway 10.5 before build 67.13, 11.0 before build 71.22, 11.1 before build 56.19, and 12.0 before build 53.22 might allow remote attackers to decrypt TLS ciphertext data by leveraging a Bleichenbacher RSA padding oracle, aka a ROBOT attack. |
| In the "NQ Contacts Backup & Restore" application 1.1 for Android, DES encryption with a static key is used to secure transmitted contact data. This makes it easier for remote attackers to obtain cleartext information by sniffing the network. |
| In the "NQ Contacts Backup & Restore" application 1.1 for Android, RC4 encryption is used to secure the user password locally stored in shared preferences. Because there is a static RC4 key, an attacker can gain access to user credentials more easily by leveraging access to the preferences XML file. |
| IBM Security Guardium 10.0 Database Activity Monitor uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 132611. |
| The airbag detonation algorithm allows injury to passenger-car occupants via predictable Security Access (SA) data to the internal CAN bus (or the OBD connector). This affects the airbag control units (aka pyrotechnical control units or PCUs) of unspecified passenger vehicles manufactured in 2014 or later, when the ignition is on and the speed is less than 6 km/h. Specifically, there are only 256 possible key pairs, and authentication attempts have no rate limit. In addition, at least one manufacturer's interpretation of the ISO 26021 standard is that it must be possible to calculate the key directly (i.e., the other 255 key pairs must not be used). Exploitation would typically involve an attacker who has already gained access to the CAN bus, and sends a crafted Unified Diagnostic Service (UDS) message to detonate the pyrotechnical charges, resulting in the same passenger-injury risks as in any airbag deployment. |
| Lack of Transport Encryption in the public API in Philips Hue Bridge BSB002 SW 1707040932 allows remote attackers to read API keys (and consequently bypass the pushlink protection mechanism, and obtain complete control of the connected accessories) by leveraging the ability to sniff HTTP traffic on the local intranet network. |
| Wi-Fi Protected Access (WPA and WPA2) that support 802.11v allows reinstallation of the Integrity Group Temporal Key (IGTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame, allowing an attacker within radio range to replay frames from access points to clients. |
| Wi-Fi Protected Access (WPA and WPA2) that support 802.11v allows reinstallation of the Group Temporal Key (GTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame, allowing an attacker within radio range to replay frames from access points to clients. |
