| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the clevis PKCS#11 pin. The clevis-luks-pkcs11-askpin script writes the PKCS#11 token PIN in plaintext to a file without setting restrictive permissions. Under the default process umask, the file is world-readable. Additionally, the PIN file is not reliably cleaned up if the decryption script exits early, leaving the PIN accessible indefinitely. |
| A flaw was found in the clevis PKCS#11 pin. The clevis-decrypt-pkcs11 script passes the PKCS#11 token PIN as a command-line argument to pkcs11-tool, making it visible to any local user through process listing or the /proc filesystem. |
| The WPForms Lite WordPress plugin before 2.0.2.2 does not verify server-side that a payment was completed before accepting a submission on forms using its PayPal Commerce gateway, allowing unauthenticated visitors to submit paid forms without paying. The form's confirmation is delivered and its notification emails are sent even though no order exists at the payment provider and no payment is recorded. |
| The Tickera WordPress plugin before 3.6.0.4 does not correctly verify the integrity of incoming payment notifications, and the validated signature does not cover the order or the amount, allowing unauthenticated attackers to forge a payment confirmation and mark arbitrary orders as paid without paying. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot
For QLAFX00 the request ring is ioremapped device I/O memory
(ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest
of the FX00 path accesses it through memcpy_toio() and the wrt_reg_*
helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a
plain memset(). On architectures such as ARM64 a regular memset() may
emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are
invalid on Device memory, leading to a synchronous external abort.
Use memset_io() to clear the slot for QLAFX00, matching the I/O
accessors used elsewhere on this ring. Other adapters keep the plain
memset() on their DMA-coherent rings. The zero-fill is retained for FX00
because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of
the entry and rely on the unused tail being pre-zeroed. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix skcipher_walk return code handling in aes_s390
The return codes from skcipher_walk_virt() were not properly checked
before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt().
If skcipher_walk_virt() fails, the walk structure may be in an undefined
state, and attempting to process data could lead to incorrect behavior
or accessing uninitialized memory.
Add proper return code checking to ensure correct handling of the walk
initialization and walk advance and eventually return to the caller
with that return code. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Guard page-fault worker with runtime PM check
During VM teardown, the VM's runtime PM reference is dropped
asynchronously, allowing the device to autosuspend while stale page
faults belonging to the now-dead VM are still queued. When the
page-fault worker later tries to ack one of these, it calls into
guc_ct_send_locked() on an already-suspended device, tripping:
Assertion `!xe_pm_runtime_suspended(xe)` failed!
WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe]
A live VM/exec queue always holds a PM reference while it has
outstanding work, so if the device is suspended at ack time, the
owning context is already gone and the fault is stale.
Take a runtime PM reference across the entire pagefault
queue worker to safely deliver acks for torn-down VMs.
v3:
- Move PM ref to the generic xe_pagefault_queue_work using
guard(xe_pm_runtime)(xe) instead of tracking it in the GuC
backend(Matt Brost).
v2:
- Hold PM ref across the entire batch (begin/end) instead of per-ack.
This prevents the device from autosuspending mid-batch, which would
leave write_only acks written but the end flush skipped, and skip
counter++, desyncing the cadence check.(Himal)
- Add a comment explaining stale faults.(Himal)
(cherry picked from commit fcc2431d2213dc4d04250c4f1ae87d9c3ae0d455)
[Rodrigo: Added xe_device struct for compatibility while cherry-picking] |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit
When __replay_soft_interrupts() replays a pending interrupt (e.g.
PACA_IRQ_DEC -> timer_interrupt), it calls the handler directly with a
synthetic pt_regs. The DEFINE_INTERRUPT_HANDLER_ASYNC wrapper around
each handler calls arch_interrupt_async_exit_prepare() on the way out,
which calls arch_interrupt_exit_prepare() -> local_irq_disable() ->
arch_local_irq_disable(), which does:
irq_soft_mask_set(IRQS_DISABLED) /* 0x1 */
This unconditionally overwrites irq_soft_mask with IRQS_DISABLED (0x1),
stripping the IRQS_PMI_DISABLED (0x2) bit. The result is that
irq_soft_mask is 0x1 instead of IRQS_ALL_DISABLED (0x3) when the
handler returns to __replay_soft_interrupts().
For a normally-taken interrupt this is harmless: the next interrupt
always enters through arch_interrupt_enter_prepare() which
unconditionally sets irq_soft_mask to IRQS_ALL_DISABLED. But during
replay, next_interrupt() is called directly between replayed handlers
without going back through arch_interrupt_enter_prepare(), so the
stripped bit is never restored. next_interrupt() then fires a WARNING:
WARNING: arch/powerpc/kernel/irq_64.c:75
WARN_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED)
The warning was observed early in boot on a POWER10 pseries guest
during kmem_cache_init_late(), where a spinlock release triggers
interrupt replay that processes a pending timer interrupt.
Debugger state confirming the bug:
Before timer_interrupt(®s):
irq_soft_mask = 0x3 (IRQS_ALL_DISABLED) correct
irq_happened = 0x41 (HARD_DIS|REPLAYING) correct
After timer_interrupt(®s) returns:
irq_soft_mask = 0x1 (IRQS_DISABLED) WRONG - PMI bit stripped
irq_happened = 0x41 unchanged
The fix is to replace local_irq_disable() with hard_irq_disable().
hard_irq_disable() is the right primitive here for two reasons:
1. On PPC64 (hw_irq.h:301) it calls irq_soft_mask_set_return(IRQS_ALL_DISABLED),
setting the soft mask to 0x3 (both IRQS_DISABLED and IRQS_PMI_DISABLED),
which preserves the PMI bit and fixes the WARNING. The additional
work it does (__hard_irq_disable(), PACA_IRQ_HARD_DIS |=) is
redundant but safe since both are already set at this point in the
exit path; the trace_hardirqs_off() inside is guarded by
if (!arch_irqs_disabled_flags(flags)) so it will not double-fire.
2. On PPC32 (hw_irq.h:467) hard_irq_disable() maps to
arch_local_irq_disable() -> __hard_irq_disable(), which clears
MSR[EE] in hardware. This is exactly correct: PPC32 has no soft-mask
PACA mechanism, so the hardware disable is the right way to satisfy
irqentry_exit()'s requirement. This also fixes a build error on PPC32
where irq_soft_mask_set() is only defined under CONFIG_PPC64:
arch/powerpc/include/asm/entry-common.h:273: error: implicit
declaration of function 'irq_soft_mask_set'
Using hard_irq_disable() requires no #ifdef and is consistent with
how the rest of the entry code (e.g. entry-common.h:463) handles the
same PPC32/PPC64 split. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix missing iov bounds check in parse_posix_sids()
In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied
out_len without being validated against the actual length of the received
iov (iov_len).
If a server provides an inflated out_len, sidsbuf_end will point past the
end of the iov. This defeats the bounds guards in posix_info_sid_size(),
allowing out-of-bounds reads into adjacent kernel memory.
Fix this by rejecting responses where the calculated sidsbuf_end would
exceed the received iov boundaries or cause pointer wraparound. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: always fill AVC decision in avc_has_perm_noaudit()
avc_has_perm_noaudit() is documented to return a copy of the access
decision in @avd, but its early return for an empty requested permission
set leaves the buffer untouched. All callers pass an uninitialized
stack variable and afterwards feed it to avc_audit(), and the inode hook
even stores it in the per-task decision cache.
Fill in a deny-all, audit-all decision, similar to avd_init(), so every
caller receives a defined value at no cost on the hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn()
If devm_kcalloc() for rx_chn->flows fails in a channel request function,
the error path calls k3_udma_glue_release_rx_chn(), which dereferences
the NULL rx_chn->flows pointer in k3_udma_glue_release_rx_flow().
Skip the flow release loop in k3_udma_glue_release_rx_chn() when
rx_chn->flows is not allocated.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: codel: bound the dropping loop per dequeue call
The CoDel control law schedules the next drop one interval/sqrt(count)
after the previous drop, using the configured interval
(codel_params.interval). For very small intervals the scheduled step
rounds down to zero, so the dropping loop in codel_dequeue() never
advances and drains the entire backlog under the qdisc lock in one
call - an unprivileged user can trigger a soft lockup this way.
Fix in the shared codel code used by both codel and fq_codel:
1. Make the control-law step at least 1 tick so the dropping loop
always moves forward.
2. Cap the dropping loop at CODEL_MAX_DROPS_PER_DEQUEUE (256) drops
per codel_dequeue() call, resyncing drop_next to now when the cap
is hit: the catch-up owed to the loop grows with the idle gap and
the backlog, which no interval threshold can bound. This is a
deliberate behaviour change after long idle gaps.
The cap applies to fq_codel (4b549a2ef4be) and the mac80211 TXQ path
(fixed interval, cap only).
The target sojourn delay (codel_params.target) is not validated: it
does not feed the control law, so a sub-tick value is aggressive
rather than deadlock-prone.
Conditions to recreate the bug:
- tc qdisc add dev lo root handle 1: tbf rate 1kbit burst 2kb limit 1000000
- tc qdisc add dev lo parent 1:1 handle 10: codel interval 2us target 1ms noecn limit 1000000 (same for fq_codel)
- unpatched kernel: tc accepts it; a UDP flood under the 1kbit tbf
soft-lockups (watchdog: BUG: soft lockup) while one
codel_dequeue() call drops the backlog under the qdisc lock
- patched kernel: same setup, at most 256 drops per dequeue call,
no soft lockup
Testing: claim reproducer and interval 2us/3us variants run clean;
tdc qdisc category passes (see the selftests patch). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: 6fire: Avoid embedded URBs
The USB 6fire driver uses URBs embedded in different structs for PCM,
MIDI and communication, and this is basically a buggy implementation
nowadays; since a URB is managed with a refcount, this may lead to a
UAF when the URB is released asynchronously.
For addressing the problem, this patch converts those embedded URBs to
ones that are properly allocated via usb_alloc_urb(). The
pcm_urb.packets[] is gone, as it's allocated by usb_alloc_urb(), hence
it's found in urb.iso_frame_desc[] instead.
The conversions are rather straightforward; each embedded struct urb
is changed to a pointer, and its callers are updated accordingly.
The resource for those structs are released in the common destructor
functions (usb6fire_comm_free(), etc), which are called at both the
init error path and the disconnect.
No functional changes, only compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Fix mmap_lock/disassociation_lock circular dependency
Commit 51976c6cd786 ("RDMA/core: Provide rdma_user_mmap_disassociate()
to disassociate mmap pages") introduced disassociation_lock to protect
new mmap registrations against uverbs_user_mmap_disassociate(), but
created an ABBA deadlock:
Thread A (mmap / fork):
mmap_lock -> disassociation_lock
Thread B (disassociate):
disassociation_lock -> mmap_lock
Fix by removing disassociation_lock entirely and using the pre-existing
hw_destroy_rwsem instead. hw_destroy_rwsem already provides the same
protection: rdma_umap_open() and ib_uverbs_mmap() both use
down_read_trylock() before registering a new VMA, so holding hw_destroy_rwsem
in uverbs_user_mmap_disassociate() is sufficient to block new registrations.
trylock is used in both mmap paths (not blocking down_read) because
mmap_lock is already held on entry, and uverbs_user_mmap_disassociate()
acquires mmap_lock internally — a blocking read would recreate the same
deadlock.
The only caller that was not taking hw_destroy_rwsem for write was
rdma_user_mmap_disassociate(). Fix it to take the rwsem per-ufile while
iterating under lists_mutex. This is safe because ib_uverbs_close()
releases hw_destroy_rwsem entirely before acquiring lists_mutex, so the
two locks are never held simultaneously.
lockdep warning:
[ 776.654252] ======================================================
[ 776.655214] WARNING: possible circular locking dependency detected
[ 776.656167] 6.18.0for-upstream_debug_94e244d9ccab #1 Not tainted
[ 776.657114] ------------------------------------------------------
[ 776.658087] devlink/14824 is trying to acquire lock:
[ 776.658879] ffff88811170c800 (&mm->mmap_lock){++++}-{4:4}, at: uverbs_user_mmap_disassociate+0x168/0x780 [ib_uverbs]
[ 776.660479]
[ 776.660479] but task is already holding lock:
[ 776.661460] ffff888142d92b08 (&file->disassociation_lock){+.+.}-{4:4}, at: uverbs_user_mmap_disassociate+0x39/0x780 [ib_uverbs]
[ 776.663177]
[ 776.663177] which lock already depends on the new lock.
[ 776.663177]
[ 776.664525]
[ 776.664525] the existing dependency chain (in reverse order) is:
[ 776.665724]
[ 776.665724] -> #2 (&file->disassociation_lock){+.+.}-{4:4}:
[ 776.666887] __mutex_lock+0x16d/0x2330
[ 776.667633] rdma_umap_open+0x129/0x280 [ib_uverbs]
[ 776.668489] dup_mmap+0xa40/0x1790
[ 776.669170] copy_process+0x5dd2/0x6170
[ 776.669933] kernel_clone+0xb6/0x610
[ 776.670636] __do_sys_clone+0xb5/0xf0
[ 776.671354] do_syscall_64+0x70/0x12e0
[ 776.672083] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 776.672940]
[ 776.672940] -> #1 (&mm->mmap_lock/1){+.+.}-{4:4}:
[ 776.673985] down_write_nested+0x90/0x1e0
[ 776.674751] dup_mmap+0x201/0x1790
[ 776.675448] copy_process+0x5dd2/0x6170
[ 776.676180] kernel_clone+0xb6/0x610
[ 776.676904] __do_sys_clone+0xb5/0xf0
[ 776.677615] do_syscall_64+0x70/0x12e0
[ 776.678351] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 776.679239]
[ 776.679239] -> #0 (&mm->mmap_lock){++++}-{4:4}:
[ 776.680253] __lock_acquire+0x18c6/0x2ec0
[ 776.681018] lock_acquire+0x10e/0x2e0
[ 776.681742] down_read+0x95/0x430
[ 776.682395] uverbs_user_mmap_disassociate+0x168/0x780 [ib_uverbs]
[ 776.683436] uverbs_destroy_ufile_hw+0x1ae/0x270 [ib_uverbs]
[ 776.684416] ib_uverbs_remove_one+0x22b/0x420 [ib_uverbs]
[ 776.685371] remove_client_context+0xa6/0xf0 [ib_core]
[ 776.686342] disable_device+0x12b/0x240 [ib_core]
[ 776.687249] __ib_unregister_device+0x269/0x460 [ib_core]
[ 776.688233] ib_unregister_device+0x21/0x30 [ib_core]
[ 776.689140] mlx5r_remove+0xd0/0x170 [mlx5_ib]
[ 776.689999] device_release_driver_internal+0x3b2/0x5
---truncated--- |
| A flaw was found in libsoup. When the permessage-deflate WebSocket extension compresses a very large outgoing message, truncated size calculations used for GByteArray growth could wrap, causing zlib to write past the allocated buffer and resulting in a heap buffer overflow. |
| A flaw was found in libsoup. When constructing a masked WebSocket client frame for a very large outgoing payload, size values passed to GByteArray allocation APIs could be truncated while the masking routine still used the full length, causing a heap buffer overflow. |
| A flaw was found in FreeIPA's idp-add command, where insufficiently validated --organization/--base-url input reaches a constrained eval() call before the corresponding LDAP access control check is enforced. This allows any authenticated IPA principal, regardless of privilege level, to enumerate and read the environment variables of the affected server process and to cause denial of service via memory exhaustion. |
| A flaw was found in FreeIPA. The self-managed OTP token ACI does not require authentication and does not restrict which attributes may be added alongside the token entry. An unauthenticated LDAP client can exploit this, combined with a related flaw in the underlying directory server's ACI evaluation (tracked separately), to create an arbitrary attacker-controlled Kerberos principal and have it added to the administrators group. This allows a remote, unauthenticated attacker to obtain genuine FreeIPA administrator-group membership and perform administrative operations against the directory and, on SID-enabled deployments, other IdM services. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit a vulnerability in the `/ipa/i18n_messages` endpoint by sending an arbitrarily large request body. This can cause the service to consume excessive memory, leading to memory exhaustion, degraded responsiveness, and a denial of service (DoS) condition. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit this vulnerability by sending oversized form POST requests to the `/ipa/migration/migration.py` endpoint. This can force the migration handler to read attacker-controlled request bodies fully into memory, leading to increased memory usage, slower request handling, and potential service disruption or denial of service. |
