| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in Oracle Java SE (component: Compiler). Supported versions that are affected are Oracle Java SE: 21.0.6, 24; Oracle GraalVM for JDK: 21.0.6 and 24. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE accessible data as well as unauthorized read access to a subset of Oracle Java SE accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 4.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N). |
| An issue was discovered in Artifex Ghostscript before 10.05.0. The NPDL device has a Compression buffer overflow for contrib/japanese/gdevnpdl.c. |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix mddev uaf while iterating all_mddevs list
While iterating all_mddevs list from md_notify_reboot() and md_exit(),
list_for_each_entry_safe is used, and this can race with deletint the
next mddev, causing UAF:
t1:
spin_lock
//list_for_each_entry_safe(mddev, n, ...)
mddev_get(mddev1)
// assume mddev2 is the next entry
spin_unlock
t2:
//remove mddev2
...
mddev_free
spin_lock
list_del
spin_unlock
kfree(mddev2)
mddev_put(mddev1)
spin_lock
//continue dereference mddev2->all_mddevs
The old helper for_each_mddev() actually grab the reference of mddev2
while holding the lock, to prevent from being freed. This problem can be
fixed the same way, however, the code will be complex.
Hence switch to use list_for_each_entry, in this case mddev_put() can free
the mddev1 and it's not safe as well. Refer to md_seq_show(), also factor
out a helper mddev_put_locked() to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix an integer overflow in xp_create_and_assign_umem()
Since the i and pool->chunk_size variables are of type 'u32',
their product can wrap around and then be cast to 'u64'.
This can lead to two different XDP buffers pointing to the same
memory area.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes
Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their
CPU masks and unconditionally accesses per-CPU data for the first CPU of each
mask.
According to Documentation/admin-guide/mm/numaperf.rst:
"Some memory may share the same node as a CPU, and others are provided as
memory only nodes."
Therefore, some node CPU masks may be empty and wouldn't have a "first CPU".
On a machine with far memory (and therefore CPU-less NUMA nodes):
- cpumask_of_node(nid) is 0
- cpumask_first(0) is CONFIG_NR_CPUS
- cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an
index that is 1 out of bounds
This does not have any security implications since flashing microcode is
a privileged operation but I believe this has reliability implications by
potentially corrupting memory while flashing a microcode update.
When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes
a microcode update. I get the following splat:
UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y
index 512 is out of range for type 'unsigned long[512]'
[...]
Call Trace:
dump_stack
__ubsan_handle_out_of_bounds
load_microcode_amd
request_microcode_amd
reload_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Change the loop to go over only NUMA nodes which have CPUs before determining
whether the first CPU on the respective node needs microcode update.
[ bp: Massage commit message, fix typo. ] |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix integer overflow while processing acregmax mount option
User-provided mount parameter acregmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix integer overflow while processing acdirmax mount option
User-provided mount parameter acdirmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix integer overflow while processing closetimeo mount option
User-provided mount parameter closetimeo of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: enforce underlying device type
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization. |
| There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally. |
| There exists a security vulnerability in Jetty's ThreadLimitHandler.getRemote() which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read
The nvmem interface supports variable buffer sizes, while the regmap
interface operates with fixed-size storage. If an nvmem client uses a
buffer size less than 4 bytes, regmap_read will write out of bounds
as it expects the buffer to point at an unsigned int.
Fix this by using an intermediary unsigned int to hold the value. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: socinfo: Avoid out of bounds read of serial number
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account. |
| Jinja is an extensible templating engine. Prior to 3.1.5, An oversight in how the Jinja sandboxed environment detects calls to str.format allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to store a reference to a malicious string's format method, then pass that to a filter that calls it. No such filters are built-in to Jinja, but could be present through custom filters in an application. After the fix, such indirect calls are also handled by the sandbox. This vulnerability is fixed in 3.1.5. |
| Uncontrolled Resource Consumption vulnerability in the examples web application provided with Apache Tomcat leads to denial of service.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.9.97.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions
may also be affected.
Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: fix potential array underflow in ucsi_ccg_sync_control()
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow. |
| Send is a library for streaming files from the file system as a http response. Send passes untrusted user input to SendStream.redirect() which executes untrusted code. This issue is patched in send 0.19.0. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group
The DisplayPort driver's sysfs nodes may be present to the userspace before
typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that
a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in
hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns
NULL in those cases.
Remove manual sysfs node creation in favor of adding attribute group as
default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is
not used here otherwise the path to the sysfs nodes is no longer compliant
with the ABI. |
| Improper Handling of Exceptional Conditions, Uncontrolled Resource Consumption vulnerability in Apache Tomcat. When processing an HTTP/2 stream, Tomcat did not handle some cases of excessive HTTP headers correctly. This led to a miscounting of active HTTP/2 streams which in turn led to the use of an incorrect infinite timeout which allowed connections to remain open which should have been closed.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.0-M1 through 9.0.89.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 though 8.5.100. Other EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.0-M21, 10.1.25 or 9.0.90, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fixed integer types and null check locations
[why]:
issues fixed:
- comparison with wider integer type in loop condition which can cause
infinite loops
- pointer dereference before null check |
