| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: free the matchall entry on destroy
sparx5_tc_matchall_replace() allocates a struct sparx5_mall_entry for
every offloaded matchall filter and adds it to sparx5->mall_entries.
sparx5_tc_matchall_destroy() removes the entry from the list, but never
frees it, so the entry of every deleted mirror and goto matchall filter
is leaked.
Free the entry after unlinking it.
The leak was discovered by an AI code review agent, and reproduced with
kmemleak on a lan969x EV board (EV23X71A) by repeatedly adding and
deleting matchall mirror and goto filters. With the fix, kmemleak no
longer reports the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: stop reusing skb after queue override
A nonzero dev_queue_xmit() result does not return ownership of the skb.
When an override port's qdisc drops it, the queue override helper used to
try another port or the mode transmit op with the freed skb.
Return the handoff decision separately from transmit success. Select only
the first override port under RCU and stop after handing it the skb,
regardless of the lower transmit result. Keep the existing success and
drop accounting.
BUG: KASAN: slab-use-after-free in sk_skb_reason_drop
Write of size 4 by task poc/5040
sk_skb_reason_drop (net/core/skbuff.c:1240)
dev_kfree_skb_any_reason (net/core/dev.c:3470)
ab_transmit (drivers/net/team/team_mode_activebackup.c:49)
team_xmit (drivers/net/team/team_core.c:1849)
__dev_direct_xmit (net/core/dev.c:4934)
Freed by task 5040:
__tcf_kfree_skb_list (net/sched/sch_generic.c:43)
__dev_queue_xmit (net/core/dev.c:4831)
team_xmit (drivers/net/team/team_core.c:1846)
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| In the Linux kernel, the following vulnerability has been resolved:
cxgb4/ch_ktls: disable softirqs around tid_list erases
chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path
using xa_insert_bh(). The array is shared by the adapter's connections
and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and
the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray
lock without disabling softirqs.
When cleanup runs with softirqs enabled, a receive softirq for another
connection on the same CPU can interrupt the erase and spin on the lock
held by the interrupted task. Use xa_erase_bh() at both sites to match
the insertion path. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.2 could allow a remote attacker to obtain sensitive information due to binding to an unrestricted IP address. |
| NoMachine Redis Improper Authentication Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of NoMachine. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the authentication mechanism controlling access to the Redis database. The issue results from using insufficient entropy in the generation of credentials. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the service account. Was ZDI-CAN-30984. |
| NoMachine mDNS Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NoMachine. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the parsing of mDNS resource records. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-30982. |
| GIMP APNG File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of APNG files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29400. |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in Oracle Essbase (component: Essbase Web Platform). The supported version that is affected is 21.8.3.0.0. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 8.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Essbase. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in the JD Edwards EnterpriseOne Orchestrator product of Oracle JD Edwards (component: E1 IOT Orchestrator Security). Supported versions that are affected are 9.2.0.0-9.2.26.5. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise JD Edwards EnterpriseOne Orchestrator. While the vulnerability is in JD Edwards EnterpriseOne Orchestrator, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of JD Edwards EnterpriseOne Orchestrator. CVSS 3.1 Base Score 10.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in Oracle GoldenGate (component: Admin Server Executable). Supported versions that are affected are 19.1.0.0.0-19.32.0.0, 21.3-21.23 and 23.4-23.26.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTPS to compromise Oracle GoldenGate. Successful attacks of this vulnerability can result in takeover of Oracle GoldenGate. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| IBM Guardium Data Protection 12.1, and 12.2 could allow a remote attacker to obtain sensitive information due to use of a hard-coded cryptographic key. |
| IBM Planning Analytics 2.0 and 2.1 are vulnerable to a stack-based buffer overflow, caused by improper bounds checking. An attacker could overflow the buffer and execute arbitrary code on the system. |
| In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, a user that holds a role with the schedule_search capability could bypass the expected safeguards in the scheduled search workflow. The user could then run risky Search Processing Language (SPL) commands that disclose or alter Splunk Enterprise data or disrupt Splunk Enterprise availability.
The vulnerability is possible because the Splunk Enterprise search scheduler does not apply SPL safeguards for risky commands to scheduled searches.
For more information see SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands) in the Splunk documentation.
For more information see authorize.conf (https://help.splunk.com/en/data-management/splunk-enterprise-admin-manual/10.6/configuration-file-reference/10.6.0-configuration-file-reference/authorize.conf) in the Splunk documentation. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 10.1 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, when OmniAuth SAML and LDAP auto-linking were both enabled, an authenticated user could have taken over an existing LDAP-backed account without any interaction from the targeted user, due to improper input sanitization in the LDAP email lookup path used during OmniAuth identity linking. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.2 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, under certain conditions, could have allowed an authenticated user with a read_api-scoped token to retrieve a project's incoming email address and create work items, bypassing the token's restrictions, due to insufficient scope enforcement on a GraphQL field. |
| Local privilege escalation in Checkmk 2.5.0p14 allows a local user with write access to the Oracle client library directory of an Oracle home listed in the 'oratab' file or to the 'oratab' file itself to execute code as root if an agent has the 'mk-oracle' plugin enabled. |
| Apache Traffic Server can resume a TLS session across SNI virtual hosts without re-verifying a client certificate required by the resumed host's verify_client STRICT policy.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server's default outbound session-sharing policy can reuse a pooled TLS session authenticated with one client certificate for a transaction configured to present a different one.
This issue affects Apache Traffic Server: from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
