Export limit exceeded: 417396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98848 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rtc: ac100: Assign .num before accessing .hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS) about the number of elements in .hws[], so that it can warn when .hws[] is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in ac100_rtc_register_clks() due to .num being assigned only after every clkout clock has been stored in .hws[]. With CONFIG_UBSAN_BOUNDS and a compiler that implements __counted_by (GCC 15.1+ or Clang 20.1+), this triggers an array-index-out-of-bounds report during probe, and with CONFIG_UBSAN_TRAP the first store traps. Initialize .num with AC100_CLKOUT_NUM, the number of elements .hws[] was allocated with, right after the allocation. That is the value the loop counter ends up at on the success path anyway, so the provider's behaviour is unchanged. | ||||
| CVE-2026-107431 | 2 Crocoblock, Wordpress-extensions | 2 Jetformbuilder, Jetformbuilder | 2026-10-24 | 7.5 High |
| Missing Authorization vulnerability in Crocoblock JetFormBuilder jetformbuilder allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects JetFormBuilder: from n/a through 3.6.6. | ||||
| CVE-2026-107433 | 2 Miniorange, Wordpress-extensions | 2 Wp Oauth Server, Wp Oauth Server | 2026-10-24 | 6.5 Medium |
| Missing Authorization vulnerability in miniOrange WP OAuth Server miniorange-oauth-20-server allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP OAuth Server: from n/a through 6.4.0. | ||||
| CVE-2026-110260 | 1 Ow2 | 1 Asm | 2026-10-24 | 5.5 Medium |
| OW2 ASM 3.0 before 9.11 contains a quadratic memory allocation vulnerability in MethodWriter.computeMaxStackAndLocal() and computeAllFrames() when using COMPUTE_MAXS or COMPUTE_FRAMES. Attackers can supply a crafted class file with thousands of overlapping exception handlers, causing excessive Edge allocations and an OutOfMemoryError that crashes the JVM. | ||||
| CVE-2026-110627 | 2 Macwarrior, Oxygenz | 2 Clipbucket-v5, Clipbucket | 2026-10-24 | 4.7 Medium |
| ClipBucket v5 through 5.5.3-#206 contains a reflected cross-site scripting vulnerability in admin_area/index.php that allows attackers to inject HTML via the val parameter in mode=add_todo. Attackers can lure a logged-in administrator into submitting a cross-site POST form without CSRF protection, executing script in the admin panel origin. | ||||
| CVE-2026-73130 | 1 Gitea | 1 Gitea | 2026-10-24 | 4.3 Medium |
| Gitea does not limit the length of the gitignores field accepted by repository-creation forms and the API. Repository initialization splits the field into template names, repeatedly reads the referenced templates, and buffers their contents in memory. An attacker who can create repositories can submit an oversized value to amplify template reads and memory use, impairing availability. | ||||
| CVE-2026-110717 | 1 Meetecho | 2 Janus, Janus-gateway | 2026-10-24 | 5.3 Medium |
| Janus WebRTC Server through 1.4.3 contains a path traversal vulnerability in the Record&Play plugin that allows unauthenticated attackers to write files outside recordings_path via the record request filename. Attackers can supply filenames with path separators to create or truncate files ending in -audio.mjr, -video.mjr or -data.mjr anywhere the Janus process can write outside protected folders. | ||||
| CVE-2026-91159 | 1 Discourse | 1 Discourse | 2026-10-24 | 7.7 High |
| Discourse is an open-source discussion platform. Prior to 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9, oEmbed processing treated an entire attacker-controlled HTML fragment as trusted when the fragment contained an iframe whose source matched the configured allowlist. A user with posting permission who controlled a public webpage and its oEmbed response could combine an allowlisted iframe with unrelated sibling HTML or CSS, causing stored visual overlays or other styled content to appear in post content and enabling misleading or fraudulent user interfaces. Exploitation requires a posting account, control of the fetched webpage and oEmbed response, and an allowlisted iframe source. The issue affects content integrity but does not expose restricted data, disrupt availability, or require interaction with Discourse Content Security Policy. This issue is fixed in versions 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9. | ||||
| CVE-2026-91157 | 1 Discourse | 1 Discourse | 2026-10-24 | 7.5 High |
| Discourse is an open-source discussion platform. Prior to 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9, sites with secure uploads enabled did not reconcile existing upload security metadata when a previously public category became read-restricted or when category permissions changed during a bulk import. Media and attachments uploaded while the category was public retained a public accessibility flag and remained reachable by anonymous users through their short upload URLs, including uploads associated with deleted topics. This issue is fixed in versions 2026.9.0, 2026.8.1, 2026.7.3, and 2026.1.9. | ||||
| CVE-2026-47790 | 1 Qnap Systems | 1 Quftp Service | 2026-10-24 | N/A |
| A cross-site scripting (XSS) vulnerability has been reported to affect QuFTP Service. If a remote attacker gains a user account, they can then exploit the vulnerability to inject malicious code. We have already fixed the vulnerability in the following version: QuFTP Service 1.4.6 and later QuFTP Service 1.5.5 and later QuFTP Service 1.6.5 and later | ||||
| CVE-2026-99020 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4 The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two entries, covering selectors 0x00-0x45. The linear range helpers loop over n_linear_ranges entries, so any lookup of a selector above 0x45 reads past the end of the array and treats whatever follows it as two more ranges. This happens on the normal registration path when the core checks the voltage constraints against every selector. TPS652G1 uses the same descriptors and is affected too. Use ARRAY_SIZE() so the count always matches the table. | ||||
| CVE-2026-98789 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix objects stuck in free_by_rcu_ttrace do_call_rcu_ttrace() returns early when call_rcu_ttrace_in_progress is set and leaves the objects in free_by_rcu_ttrace. __free_rcu() frees waiting_for_gp_ttrace only and clears the flag. Hence the objects that free_bulk() or __free_by_rcu() added while RCU tasks trace GP was in flight stay in free_by_rcu_ttrace until free_bulk() or alloc_bulk() is called for the same bpf_mem_cache again, which may never happen. The number of such objects is not bounded. Turn call_rcu_ttrace_in_progress into three states: 0 - idle 1 - __free_rcu() is queued 2 - __free_rcu() is queued and free_by_rcu_ttrace got more objects since do_call_rcu_ttrace() sets 2. __free_rcu() does cmpxchg(1 -> 0) and starts the next GP when it fails. It cannot clear the flag first and check free_by_rcu_ttrace later, since bpf_mem_alloc_destroy() frees bpf_mem_cache without waiting for RCU callbacks when the flag is zero. Now __free_rcu() queues itself, so the one that didn't see 'draining' may do call_rcu_tasks_trace() after rcu_barrier_tasks_trace() in free_mem_alloc(). Queue it under rcu_read_lock() and do synchronize_rcu() before the barriers. Calling rcu_barrier_tasks_trace() twice works too, but creating and destroying hash maps in a loop on many cpus slows down to one free_mem_alloc() per GP and kworkers pile up. | ||||
| CVE-2026-98808 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: systemport: Fix buffer overflow in bcm_sysport_get_stats() When running on SYSTEMPORT Lite, certain statistics are unsupported and skipped during bcm_sysport_get_stats(). The variable 'j' tracks the compacted index into the destination data buffer, whereas 'i' iterates over all elements in bcm_sysport_gstrings_stats. Because the buffer allocated by ethtool is sized only according to bcm_sysport_get_sset_count(), storing values at data[i] instead of data[j] writes past the allocated array bounds, leading to memory corruption. Fix this by writing to data[j] instead of data[i]. | ||||
| CVE-2026-98820 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: set RQF_USE_SCHED when the operation is known The cached requests are allocated for one operation but can be handed out for another. A passthrough command has RQF_USE_SCHED cleared, so using those flags for a subsequent read/write bio will insert it into the scheduler without ->prepare_request() and frees it without ->finish_request(). For kyber, this leaks the domain token acquired at dispatch and stalls the queue. Don't set RQF_USE_SCHED based on the first operation the batch happened to be allocated for. Instead, set it after the request is claimed by an operation. Introduce a helper function, blk_mq_rq_late_init() for this, and absorb blk_mq_rq_time_init() since the two run together. | ||||
| CVE-2026-98822 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: prevent AP VLAN tx from other interfaces Since the station lookup was factored out of ieee80211_build_hdr(), ieee80211_lookup_ra_sta() uses sta_info_get_bss() for all AP and AP VLAN frames, not only for control port frames. A unicast frame sent on one interface thus matches a station of a different VLAN of the same BSS and is transmitted to it. Only match stations of the interface the frame is sent on, except for control port frames, since those may be sent for VLAN stations directly on the BSS interface. | ||||
| CVE-2026-98832 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: save IRQ state in blkg_tryget_closest() bio_set_dev() associates the bio with a blkg through bio_associate_blkg(). If the blkg lookup misses, blkg_tryget_closest() takes q->queue_lock with spin_lock_irq() and releases it with spin_unlock_irq(), which unconditionally enables local interrupts. Callers may call bio_set_dev() with interrupts already disabled, e.g. dm-thin's pool_map() does so while holding pool->lock taken with spin_lock_irq(). The nested spin_unlock_irq() then enables interrupts while pool->lock is still held, so an I/O completion softirq can run on the same CPU, re-acquire pool->lock (thin_endio(), or overwrite_endio() -> complete_mapping_preparation()) and deadlock. lockdep reports this as inconsistent SOFTIRQ-ON-W to IN-SOFTIRQ-W usage. Commit 3a762de55b4e ("block: save irq state in blkg_lookup_create()") fixed the same problem while the lock lived in blkg_lookup_create(), but commit 9327a865e395 ("blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()") moved the locking into blkg_tryget_closest() and reverted it to spin_lock_irq(). Save and restore the caller's IRQ state instead. | ||||
| CVE-2026-115929 | 1 Mongodb | 1 Compass | 2026-10-24 | 6.8 Medium |
| MongoDB Compass relies on Electron, a third-party runtime that carries its own TLS root certificate store. This root certificate store has the recoverable eMudhra intermediate CA certificates. Issue is resolved by updating to Compass 1.53.1, which includes Electron 44.9.1. | ||||
| CVE-2026-98093 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally and hw_free() disables it unconditionally, but the PCM core does not guarantee 1:1 pairing: hw_free() can run without hw_params(), and hw_params() can be called multiple times from the SETUP state. This triggers an "already disabled" WARN() in the first case and leaks an enable reference in the second, leaving the clock ungateable. Guard both sides with the existing mclk_flag, as fsl_sai.c does with mclk_streams. | ||||
| CVE-2023-7356 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID. | ||||
| CVE-2026-110371 | 2 Wordpress-extensions, Wpchill | 2 Strong Testimonials, Strong Testimonials | 2026-10-24 | 4.3 Medium |
| Missing Authorization vulnerability in WP Chill Strong Testimonials strong-testimonials allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Strong Testimonials: from n/a through 3.3.12. | ||||