| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation. |
| RabbitMQ is a messaging and streaming broker. From 4.1.0 until 4.3.3, 4.2.9, and 4.1.11, Stream Management Super-Stream Binding Keys Allocation Allows Low-Privilege Node Denial of Service. rabbitMQ 4.3.1 with rabbitmqstreammanagement enabled accepts PUT /api/stream/super-streams/{vhost}/{name} requests from an authenticated management user that can access the target vhost. When the request body contains the binding-keys field, the handler parses the attacker-controlled comma-separated string and builds the full stream-name list before checking whether the user has permission to configure the resulting streams. A low-privileged management user with vhost access but no configure, write, or read permission can therefore force large transient allocations before the resource permission check. In a 768 MB memory-limited container, one HTTP PUT with about 4.5 MB of JSON body killed the RabbitMQ container with Docker state exited true An authenticated low-privileged management user can kill a memory-limited RabbitMQ node with one HTTP This issue is fixed in versions 4.3.3, 4.2.9, and 4.1.11. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6, Atom table exhaustion via management API node field. pUT /api/queues/:vhost/:name (and the exchanges and bindings endpoints) accepts a node JSON field. The value goes through rabbitnodes:make → listtoatom with no cluster membership check first. Each unique value permanently leaks one atom. A March 2026 refactoring (ea61ce2563) introduced safe helpers in rabbitmgmtnodes.erl (parsenodename, safeatom, and requirenodename, using binarytoexistingatom) and fixed several callers (QQ replica ops, wmauthattempts, wmnodememoryets, getsortreverse, and rabbitfederationmgmt), but getnode/1 in rabbitmgmtutil.erl:880-885, the primary vector used by directrequest/6, was not Roughly 900K requests crash the VM via systemlimit, and all tenants lose Any user with the management tag and one vhost, the lowest privilege This issue is fixed in versions 3.13.15 and 4.0.20 and 4.1.11 and 4.2.6. |
| IBM DataPower Gateway 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service due to uncontrolled resource consumption. |
| Inefficient algorithmic complexity in the webmail's message view of the REST API in Progressive Robot hMailServer 6.3.2 through 6.3.5 allows a remote unauthenticated attacker to make the webmail, the administration console and the REST API unavailable by sending a message. The route that renders a received message's HTML replaced each reference to an embedded image in place, with work that grew with the square of the number of references, and wrote the image out for every reference while counting it against its size limit only once. A message whose HTML refers to one small embedded image a very large number of times, opened in the webmail by its recipient, therefore keeps one of the listener's four worker threads busy for minutes and makes it build a document of gigabytes, so that a few such messages leave the HTTP listener unable to answer anybody. |
| Inefficient algorithmic complexity in the REST API (6.3.3 through 6.3.5) and the IMAP PREVIEW response (6.2.22 through 6.3.5) of Progressive Robot hMailServer allows a remote unauthenticated attacker to make the webmail, the administration console and the REST API unavailable by sending a message. To show a snippet of each message in a folder's message list, the server decoded the character entity references of a message that has an HTML part and no text part with a string replacement whose work grew with the square of their number. A received HTML-only message holding a very large number of entity references therefore keeps one of the listener's four worker threads busy for minutes or longer each time the recipient's webmail lists the folder, without the message being opened, so that a few such listings leave the HTTP listener unable to answer anybody. The IMAP PREVIEW response read such text the same way, holding an IMAP thread for each client that asks for the preview of such a message. The flaw is in the server's shared string class, whose replace and remove both ran in quadratic time. |
| Progressive Robot hMailServer 6.0.0 through 6.3.5 processes several IMAP commands from a signed-in account in time quadratic in the command's length or in the number of elements it names, and can be made to hold memory out of proportion to a command. The FETCH data-item parser normalised a BODY[] section with a case-insensitive string replacement that copied the whole item per occurrence and split the item list by repeatedly copying the remainder of the command; the server's case-insensitive search compared a needle afresh at every position, so a long SEARCH TEXT key over a message cost the product of the two lengths; SEARCH message sets and the saved-result marker ($), SORT criteria, HEADER.FIELDS name lists and UID ranges were each read once per message rather than once per command; and a FETCH naming a message's sections very many times read and held every section in memory before sending any. An IMAP command may continue past one line through non-synchronizing literals, so one command can reach about eleven megabytes. The IMAP worker threads are a small pool shared with SMTP and POP3, so a signed-in user sending such commands can make the IMAP, SMTP and POP3 services stop responding (CWE-407) and can consume excessive memory (CWE-400). |
| Inefficient algorithmic complexity in the decoding of message header fields in Progressive Robot hMailServer 6.0.0 through 6.3.5 allows a remote unauthenticated attacker to make the IMAP, SMTP and POP3 services, or the webmail, unavailable by sending a message. The server unfolded a decoded header value by finding each line break from the end of the value and removing it, moving the rest of the value each time, so its work grew with the square of the number of line breaks, and an RFC 2047 encoded word may decode to any number of them. A received message whose Subject or other header field holds such a value keeps a worker thread busy for minutes or longer each time the value is read: when the recipient's IMAP client searches, sorts or threads the folder by a header, when the webmail lists the folder, and, where configured, when a rule tests a header, a spam tag is added to the Subject or an abuse report is read during delivery. The IMAP worker threads are shared with SMTP and POP3, so a few such messages stop those services responding. The server's reading of a message header from its file also searched everything read so far after each 4,000 bytes, costing seconds for a header of tens of megabytes. |
| Inefficient algorithmic complexity in the bounce and complaint processing of Progressive Robot hMailServer 6.3.4 and 6.3.5 allows a remote unauthenticated attacker to stop mail delivery by sending messages, when bounce processing or complaint processing is enabled or a mailing list is managed by the server (none is by default). The readers of incoming delivery status notifications (RFC 3464) and abuse feedback reports (RFC 5965) removed the blank lines at the start of the returned headers part two bytes at a time, copying the rest of the part each time, so their work grew with the square of the number of blank lines. A message shaped like such a report, whose headers part begins with a very large number of blank lines within the reader's 2 MB limit, keeps a delivery thread busy for over a minute while it is delivered, and a few such messages a minute keep every delivery thread busy. |
| Inefficient algorithmic complexity in the inbound DKIM and ARC signature verification of Progressive Robot hMailServer 6.0.0 through 6.3.5 allows a remote unauthenticated attacker to make the mail services unavailable by sending a message. Building the canonical header and choosing the header fields named in a signature's h= tag took time growing with the square of the message's header: the 'simple' canonicalisation prepended each continuation line of a folded field to the lines already gathered, and both canonicalisations searched the gathered fields from the bottom for each h= name and erased the match from the middle of the list. A message whose header holds very many fields, or a field folded over very many lines, with a DKIM-Signature the attacker signs for a domain they control, keeps a worker thread busy for tens of seconds per signature; up to ten signatures are evaluated per message by each of the DKIM and DMARC tests, on the threads that serve delivery and SMTP. |
| Inefficient algorithmic complexity in the SPF macro expansion of Progressive Robot hMailServer 6.3.4 and 6.3.5 allows a remote unauthenticated attacker to consume worker-thread time by publishing a crafted SPF record. RFC 7208 section 7.1 requires a name too long to look up to lose whole labels from the left; the server did this by removing one label at a time and copying the rest of the name each time, so the work grew with the square of the expansion. An attacker who publishes an SPF record for a domain they control, with a mechanism whose domain-spec expands through macros to a name far longer than 253 characters, makes the SPF check of a message from that domain take several seconds. The expansion is bounded by SPF's own per-term and per-macro limits, so the loss of availability is partial. |
| IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service due to algorithmic complexity in linked-list traversal. |
| When processing issue and comment bodies, Gitea scanned the entire preceding text for action keywords such as "closes" or "fixes" once per Markdown link, giving processing time quadratic in the input size. An authenticated user able to submit issue or comment content could send a crafted body of about 1 MB that keeps a CPU core busy for several minutes while holding a database transaction open. |
| Asymmetric Resource Consumption vulnerability in Apache Directory LDAP API.
A LDAP server using the LDAP API (like Apache DS) may consume 100% of a CPU core indefinitely when processing some badly crafted Telephone Numbers.
This issue affects Apache Directory LDAP API: from 2.1.0 before 2.1.9.
Users are recommended to upgrade to version 2.1.9, which fixes the issue. |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.0.0 until 2.131.0, the HTML, JATS, OpenDocument spreadsheet, and BoxNote backends, including docling/backend/html_backend.py, docling/backend/jats_backend.py, and docling/backend/boxnote_backend.py, accept the rowspan and colspan attribute values without an upper bound and execute loops or allocate a table grid proportional to the declared span. A very small document can therefore cause sustained CPU use or multi-gigabyte memory allocation, and the document_timeout setting does not interrupt the single backend conversion call. Export through the TableData.grid property can further materialize the oversized grid. This issue is fixed in 2.131.0. |
| IEEE C37.118 Synchrophasor protocol dissector memory leak in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| IBM Langflow OSS 1.0.0 through 1.12.2 could allow a remote authenticated attacker to cause a denial of service due to uncontrolled resource consumption during ZIP file extraction. |
| Issue summary: The QUIC stream reassembly algorithm performance deteriorates
progressively as packets are arriving out of order. The worst case has
a quadratic complexity proportional to the number of stream frames kept in
the buffer for the received stream data.
Impact summary: A remote QUIC peer that completes the handshake can create
a connection-scoped CPU pressure and potentially a Denial of Service using
compliant STREAM frames inside the advertised receive window, with low
attacker bandwidth.
CWE: CWE-407: Inefficient Algorithmic Complexity
Description: OpenSSL manages received QUIC stream fragments using a
doubly-linked list. While it optimizes for append operations (at the end of
the list), it falls back to a head-to-tail linear search for any fragment
that does not immediately follow the current `tail`.
By manipulating the sequence of offsets, an attacker can force the server
to perform O(n^2) operations, consuming excessive CPU time for the
QUIC process.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-30 and 6.9.13-55, a crafted XMP profile can reach a recursion limit that is handled as a fatal condition instead of an ordinary exception, terminating the image-processing process. This issue is fixed in versions 7.1.2-30 and 6.9.13-55. |
| A weakness has been identified in Open5GS up to 2.7.7. This vulnerability affects the function ogs_pfcp_xact_local_create of the file src/upf/gtp-path.c of the component GTP-U Receive Path. This manipulation causes allocation of resources. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. Patch name: 9ffc252482d9b03ac01abcedbe95497ff4f95dd0. It is recommended to apply a patch to fix this issue. |
