| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: validate access flags before swapping the MR's PD
rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then
validates the IB_MR_REREG_ACCESS argument:
if (flags & IB_MR_REREG_PD) {
rxe_put(old_pd);
rxe_get(pd);
mr->ibmr.pd = ibpd;
}
if (flags & IB_MR_REREG_ACCESS) {
if (access & ~RXE_ACCESS_SUPPORTED_MR)
return ERR_PTR(-EOPNOTSUPP);
mr->access = access;
}
Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is
IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access
check with mr->ibmr.pd already reassigned.
mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the
success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error
without undoing the reassignment, so mr->pd == new_pd while the usecnts
still charge the MR to orig_pd. ib_dereg_mr_user() then decrements
new_pd, whose count can reach zero while a memory window still references
it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup()
writes to freed memory:
BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0
Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591
__rxe_put+0x31/0xa0
rxe_mw_cleanup+0x42/0x200
__rxe_cleanup+0x115/0x370
rxe_dealloc_mw+0x4c/0x80
Allocated by task 591:
ib_uverbs_alloc_pd+0x258/0x540
Freed by task 591:
ib_dealloc_pd_user+0x174/0x210
uverbs_free_pd+0x8d/0xc0
ib_uverbs_dealloc_pd+0x18e/0x1d0
Validate the access flags before mutating any state so the callback either
applies every requested change or none. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req->ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: validate scan response extents
mwifiex_ret_802_11_scan() subtracts the fixed response fields and the
firmware-provided BSS length from resp->size without first proving that
either extent fits. A short response or oversized BSS length can
therefore underflow tlv_buf_size and make the TLV parser walk beyond the
command response.
Compute the fixed extent from the selected normal or background scan
response. Validate that the fixed fields and BSS data fit before deriving
the TLV extent and entering the parser. |
| `openvt -u` is intended to identify the owner of the current VT and then execute `login` as that user from a privileged context. In the documented `kbrequest`/init usage, the ownership test in `authenticate_user()` relies on `stat("/proc/<pid>/fd/0")`. `stat()` on `/proc/<pid>/fd/0` follows the symlink to the underlying TTY device node. As a result, `buf.st_uid` reflects the owner of the TTY node rather than the owner of the process holding the file descriptor. If the TTY owner returns to `root` or the getty owner after logout while an unprivileged process still has `fd 0` attached to that TTY, the check can incorrectly treat that process as belonging to the privileged console owner. Once that check succeeds, the `-u` path executes a passwordless login as the selected user. In the documented `kbrequest`/init deployment using `openvt -us`, this can result in passwordless `login -f root` on the spawned VT. This report establishes that privilege escalation path for that documented deployment; it does not claim equivalent reachability for deployments that do not use `openvt -u` from a privileged `kbrequest`/init path. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: cancel reconnect work in clean_demultiplex_info()
clean_demultiplex_info() cancels server->echo delayed work but not
server->reconnect, which can cause a use-after-free when the
demultiplex thread exits while a reconnect work is still queued:
cifs_demultiplex_thread()
cifs_readv_from_socket()
cifs_reconnect()
__cifs_reconnect()
cifs_queue_server_reconn()
mod_delayed_work(cifsiod_wq, &server->reconnect, 0)
clean_demultiplex_info()
cancel_delayed_work_sync(&server->echo) // echo canceled
// reconnect NOT canceled
kfree_sensitive(server) // server freed
...later, on cifsiod_wq:
smb2_reconnect_server()
server->srv_count // UAF read of freed server
Fix this by canceling server->reconnect delayed work in
clean_demultiplex_info() before the server is freed, the same way
cifs_put_tcp_session() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold net_device reference under RCU in bundle creation
xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into
a local pointer without taking a device reference, then pass it to
xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via
dst_dev_put() and frees the old net_device, causing a use-after-free
when xfrm6_fill_dst() later dereferences the stale dev pointer.
BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860
(net/ipv6/xfrm6_policy.c:86 netdev_hold())
Read of size 8 at addr ffff8880142fe588 by task exploit/153
Call Trace:
xfrm6_fill_dst+0x82c/0x860
xfrm_resolve_and_create_bundle+0x21d4/0x2bd0
xfrm_lookup_with_ifid+0x485/0x1640
ip6_dst_lookup_flow+0x19b/0x1e0
udpv6_sendmsg+0x1443/0x2dd0
Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU
read-side critical section active until xfrm_fill_dst() has taken the
required device references. |
| An issue in the ConfirmNameConstraints() function (wolfcrypt/src/asn.c) of wolfSSL v5.9.1 and v5.9.2 allows attackers to cause a Denial of Service (DoS) via providing crafted Certificate Authority certificates, leading to valid certificates without SAN to be incorrectly rejected by wolfSSL-based TLS clients. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept
We need to clear cep before release state_lock as siw_qp_llp_close and
siw_qp_modify->siw_qp_llp_close did.
Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock
is released before the error path cleanup. A concurrent ibv_modify_qp()
transitioning the QP to ERROR can race in this window:
siw_accept() ibv_modify_qp(ERROR)
---------------------- ----------------------
siw_qp_modify() fails
up_write(&qp->state_lock)
down_write(&qp->state_lock)
nextstate_from_idle():
if (qp->cep)
siw_cep_put(qp->cep) <- frees cep
qp->cep = NULL
goto error
cep->qp = NULL <- UAF
Clear qp->cep and drop the association reference taken by siw_cep_get(),
all under the write lock held from the initial down_write(&qp->state_lock).
Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free
the cep before siw_accept() is done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: RCU-free the scheduler-containing ring and VM objects
Both struct msm_ringbuffer and struct msm_gem_vm embed a struct
drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback
msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then
free the containing object with plain kfree().
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace (the submit out-fence, or
a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded
scheduler after the ring/VM is freed, so a later get_timeline_name() --
reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab
memory (KASAN slab-use-after-free read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
objects with kfree_rcu() instead of kfree().
Patchwork: https://patchwork.freedesktop.org/patch/750234/ |
| IBM Langflow OSS 1.0.0 through 1.12.2 could allow a remote authenticated attacker to obtain sensitive information due to improper authorization. |
| Confused deputy in WebAPKs in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) |
| Incorrect authorization in Actor in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to potentially bypass site isolation via a crafted HTML page. (Chromium security severity: Low) |
| Mooncake Store master through 0.3.13.post1 contains a missing authentication vulnerability that allows unauthenticated attackers to force-delete any object via Remove, RemoveByRegex, RemoveAll and BatchRemove on the coro_rpc port. Attackers can send forged requests with the force flag set to bypass lease checks, wipe keys matching any regex, or clear the entire store, causing cache loss and request failures. |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.9, the run_shell tool in the CommandLineExecutor component of ufo/client/mcp/local_servers/cli_mcp_server.py validates only the first token of the bash_command parameter and permits explorer.exe. On Windows, explorer.exe delegates its following path argument to ShellExecute, so an attacker-influenced agent call can launch an arbitrary executable or script as the desktop user even though the subprocess uses shell=False. Exploitation depends on a user running an affected agent workflow and on inducing the tool call, but successful execution can access or modify that user's files, tokens, and sessions. This issue is fixed in version 3.0.9. |
| A vulnerability was determined in Kusalkasilva Learning-Management-System up to ffeb873f8803f1e9664384ff75000c7da45466d2. The impacted element is an unknown function of the file student_signup.php of the component Student Registration Endpoint. This manipulation causes sql injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. |
| PLANKA 2.2.0 through 2.2.1 fails to limit incorrect TOTP codes submitted to POST /api/access-tokens/verify-totp, allowing attackers to brute force two-factor authentication codes. Attackers who know a user's password can reuse the ten-minute pending token to guess six-digit codes until one succeeds, obtaining a full access token. |
| A flaw was found in SSSD's IdP authentication provider. The eval_access_token_buf() function compares the OIDC subject identifier using strncmp() with the authenticated user's identifier length, performing a prefix comparison instead of an exact match. An attacker whose IdP identifier is a strict prefix of a target user's identifier can authenticate as the target user. |
| A path traversal flaw was found in SSSD's AD GPO provider. The ad_gpo_extract_smb_components() function does not sanitize .. sequences in the gPCFileSysPath LDAP attribute, allowing an attacker with AD GPO management access to write files outside the GPO cache directory as root. On default RHEL configurations with SELinux enforcing, this can be used to inject Kerberos configuration leading to authentication bypass. |
| Buffer Overflow vulnerability in GifLib Project GifLib v.5.2.1 allows a local attacker to obtain sensitive information via the DumpSCreen2RGB function in gif2rgb.c |
| The llhttp parser in the http module in Node v20.2.0 does not strictly use the CRLF sequence to delimit HTTP requests. This can lead to HTTP Request Smuggling (HRS).
The CR character (without LF) is sufficient to delimit HTTP header fields in the llhttp parser. According to RFC7230 section 3, only the CRLF sequence should delimit each header-field. This impacts all Node.js active versions: v16, v18, and, v20 |
