| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add
iommu_mock_device_add() first calls iommu_fwspec_init(), which on
success allocates both dev->iommu (via dev_iommu_get()) and
dev->iommu->fwspec. If the subsequent device_add(dev) call fails,
the error path only calls iommu_fwspec_free(dev), which frees
fwspec but leaves dev->iommu still allocated.
This triggers the following kmemleak report when fuzzing with Syzkaller:
BUG: memory leak
unreferenced object 0xffff888011e0a200 (size 192):
comm "syz.1.1695", pid 24885, jiffies 4295222527
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................
backtrace (crc 25df5bb3):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4575 [inline]
slab_alloc_node mm/slub.c:4899 [inline]
__kmalloc_cache_noprof+0x47a/0x710 mm/slub.c:5415
kmalloc_noprof include/linux/slab.h:950 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
dev_iommu_get+0x10c/0x1a0 drivers/iommu/iommu.c:408
iommu_fwspec_init+0x288/0x4d0 drivers/iommu/iommu.c:3087
iommu_mock_device_add+0x46/0xb0 drivers/iommu/iommu.c:385
mock_dev_create drivers/iommu/iommufd/selftest.c:1025 [inline]
iommufd_test_mock_domain drivers/iommu/iommufd/selftest.c:1066 [inline]
iommufd_test+0x2f8a/0x6190 drivers/iommu/iommufd/selftest.c:2072
iommufd_fops_ioctl+0x367/0x540 drivers/iommu/iommufd/main.c:533
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by calling dev_iommu_free(dev) instead of iommu_fwspec_free(dev)
in the device_add() failure path. dev_iommu_free() frees both fwspec
and the outer dev_iommu struct and clears dev->iommu. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Release current IOAS on xa_store() failure
iommufd_take_all_iova_rwsem() takes an object reference and the
iova_rwsem write lock before storing the IOAS in the temporary ioas_list
xarray.
If xa_store() fails, the current IOAS has not been inserted into
ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS
objects already present in that xarray, so it cannot release the current
IOAS.
Release the current IOAS rwsem and object reference before unwinding the
previously stored entries. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Free system certificate signatures
Multi-certificate support also allows the system authentication object
to store ->signature and ->save_signature, which leak when the driver is
removed. Free the signatures to avoid leaking memory. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/query: cap user size passed to copy_struct_to_user
io_handle_query_entry() clamps hdr.size for the inbound copy_from_user()
but keeps the original user value as usize. copy_struct_to_user() uses
that usize and, when it is larger than the kernel result, clear_user()s
the trailing bytes.
As hdr.size is a __u32, a query can request nearly 4 GiB of zeroing,
including on the error path where res_size stays 0. The interface is
reachable without a ring via IORING_REGISTER_QUERY.
Reject sizes larger than PAGE_SIZE, as recommended for copy_struct_*
interfaces. |
| In the Linux kernel, the following vulnerability has been resolved:
net: l2tp: do not propagate multicast notification errors
The tunnel create, tunnel modify, session create, and session modify
netlink handlers send multicast notifications through helpers that can fail
while allocating or encoding a message, or while multicasting it.
For tunnel and session create/modify, a notification is sent after the live
operation has completed. Returning a best-effort notification error as the
command result can therefore report failure for an operation that already
committed and can cause callers to retry and accumulate live objects.
Keep sending notifications for listener visibility, but do not propagate
their best-effort status as the command result. This also keeps the tunnel
modify command consistent with the other notification-only paths. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: sm501: Fix potential memory leaks during remove
The memory allocated for struct sm501_devdata in sm501_pci_probe() and
sm501_plat_probe() is not freed by the corresponding remove functions
sm501_pci_remove() and sm501_plat_remove(). Fix that by adding a call to
kfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: dvm: fix memory leak in iwl_op_mode_dvm_start()
In iwl_op_mode_dvm_start(), jumping to out_free_eeprom currently bypasses
the out_free_eeprom_blob label. Consequently, error paths triggered after
successfully parsing the EEPROM free priv->nvm_data but leak
priv->eeprom_blob.
Fix this memory leak by reordering the error handling labels so
that out_free_eeprom falls through to out_free_eeprom_blob.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have
supported Intel DVM wireless hardware and firmware to test with, no
runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: Fix possible memory leak in rtl92du_init_sw_vars()
The memory allocated inside rtl92du_init_shared_data() is not freed in
any of the subsequent error paths in rtl92du_init_sw_vars().
Fix that by adding a call to rtl92du_deinit_shared_data() in the error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: pci: fix resource leak on failed NAPI setup
rtw_pci_probe() allocates PCI resources through
rtw_pci_setup_resource() before it sets up NAPI. If
rtw_pci_napi_init() fails, the error path jumps straight to
err_pci_declaim and skips rtw_pci_destroy(), leaving the PCI
resources allocated by rtw_pci_setup_resource() behind.
Add a dedicated cleanup label for the NAPI setup failure path so probe
destroys the PCI resources.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing current
mainline kernels. The tool is still under development and is not yet
publicly available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable rtw88 PCI board to test with, no runtime testing was able to be
performed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix TX DMA mapping leak for AddBA req frames
mt7996/mt7992 hand the firmware a HW MAC-TXP for AddBA req action frames
(MT_TXD7_MAC_TXD, set in mt7996_mac_write_txwi_80211()), but are otherwise
FW-TXP devices. On tx free mt76_connac_txp_skb_unmap() therefore decodes
the per-frame txp as a struct mt76_connac_fw_txp. For a MAC-TXP the
fw_txp.nbuf byte aliases the AddBA TID word (MT_TXP1_TID_ADDBA), which is
always zero, so the unmap loop runs zero times and the skb DMA mapping in
buf[1] is never unmapped. buf[1].skip_unmap is set unconditionally, so the
generic DMA-ring cleanup skips it as well.
Each AddBA req therefore leaks one TX DMA mapping, roughly one per
(re)association. With WED enabled these mappings are bounced through the
WED swiotlb pool, so under continuous client reconnect churn the pool is
exhausted after ~1-2 days, after which DMA mapping fails for WED, the WiFi
MCU and other on-SoC consumers.
Keep the deferred (token release) unmap that the design relies on, and add
an mt7996-specific txp unmap that inspects MT_TXD7_MAC_TXD and unmaps
buf[1] from the MAC-TXP layout for those frames, delegating to
mt76_connac_txp_skb_unmap() otherwise. |
| n8n is an open source workflow automation platform. Prior to 2.37.7 and 2.38.2, the OAuth Dynamic Client Registration endpoint bounded redirect_uris but accepted arbitrarily large client_name and grant_types values. An unauthenticated remote caller could repeatedly persist oversized values in oauth_clients and exhaust database storage. The affected validation is in packages/cli/src/modules/oauth-server/oauth-server.service.ts, including MAX_CLIENT_NAME_LENGTH and MAX_GRANT_TYPES. This issue is fixed in versions 2.37.7 and 2.38.2. |
| undici's decompress interceptor decompresses response bodies according to the untrusted Content-Encoding header. While the number of content-encoding layers is capped, the total decompressed output size is unbounded and there is no configuration option to limit it. A malicious or faulty upstream can therefore return a small compressed payload, a compression bomb, that expands to hundreds of megabytes or more in client memory, an asymmetric resource consumption that can exhaust memory and crash the process. This affects undici versions from 7.15.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| An authorization bypass vulnerability in LXD allows an authenticated user to bypass project-level disk and volume limits. Two related code paths fail to verify resource limits during volume operations: the storagePoolVolumeTypePostMove function omits the limits.AllowVolumeCreation check before moving a volume across projects, and volume snapshot restore operations skip the AllowVolumeUpdate check when the configuration is nil (Config == nil). An attacker can exploit these flaws to allocate storage resources that exceed the administrative limits configured for a project. |
| Traefik is an HTTP reverse proxy and load balancer. In versions >= v2.8.2 through <= v2.11.55 and >= v3.0.0 through <= v3.7.11, the entryPoints.<name>.transport.respondingTimeouts settings — notably readTimeout, which is enabled by default at 60s — are not applied to the HTTP/3 request path. readTimeout is enforced as a deadline on the underlying TCP connection, which cannot be applied to a QUIC stream, and Traefik's HTTP/3 server is constructed without any timeout. As a result, on entry points with HTTP/3 enabled, an unauthenticated remote client that trickles request body bytes can hold a request open indefinitely and, with it, one upstream connection per request, exhausting bounded backend connection pools and causing denial of service. The issue was introduced in v2.8.2 when a quic-go API change removed the embedded http.Server that carried these timeouts. Fixed in v2.11.56 and v3.7.12. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution. |
| ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0. |
