| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in the loadDatarule handler of SysRoleController that lets any authenticated user query role data rules. Low-privileged attackers can request GET /sys/role/datarule/{permissionId}/{roleId} to read rule names, columns, conditions, values and bound rule ids for any role. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Also allocate private hash on vfork()
As Jann demonstrated, it is entirely feasible to access the mm through vfork().
Therefore we need to allocate a private hash on vfork() as well as any other
CLONE_VM user.
Specifically, it must be avoided to have (private) futex waiters before
allocating the private hash. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: do not free nlk->groups while lockless readers can use it
netlink_realloc_groups() uses krealloc() under netlink_table_grab().
Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old
bitmap is freed immediately.
Two readers of nlk->groups / nlk->ngroups do not hold the netlink
table lock:
1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the
rhashtable walk in __netlink_diag_dump(), which only holds RCU.
Only the mc_list part of the dump takes nl_table_lock.
2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been
lockless since commit 21e4902aea80 ("netlink: Lockless lookup with
RCU grace period in socket release").
Both can read a freed buffer, and sk_diag_dump_groups() can also read
past the end of the old (smaller) buffer if it happens to load the old
@groups pointer together with the new @ngroups value, copying the
result into a NETLINK_DIAG_GROUPS attribute.
This is the same class of bug that commit f773608026ee ("netlink:
access nlk groups safely in netlink bind and getname") fixed for bind()
and getname(); these two readers were missed. Simply grabbing the table
lock in sk_diag_dump_groups() is not an option, because it is also
called with nl_table_lock already held from the mc_list section of the
dump.
Make the lockless readers safe instead:
- Allocate a new bitmap and free the old one after an RCU grace period,
instead of relying on the implicit kfree() done by krealloc().
- Publish @groups before @ngroups, both with release semantics, and have
the lockless readers load @ngroups first. A reader can then never pair
the new (bigger) size with the old (smaller) buffer, and a reader
picking up the new pointer while still seeing the old size is
guaranteed to see the initialized bitmap.
netlink_realloc_groups() is called from process context (bind() and
setsockopt()), so kfree_rcu_mightsleep() can be used, once the table
has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr
When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not
set, a drm_pending_vblank_event will be allocated. If later, there is an
allocation failure or another failure at setup_out_fence(), that event
will not have base.fence set and it will not be released at
complete_signaling().
Release the event and set crtc_state->event to NULL just like in the
DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at
drm_event_reserve_init(). That is, prepare_signaling() releases the
event and there is nothing to be done at complete_signaling(). Use
drm_event_cancel_free() as that will also undo drm_event_reserve_init()
in case it has been called. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: pxa: fix double counting of the hw descriptors
pxad_alloc_desc() was converted from
kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT)
to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc
itself - but only where the compiler has __builtin_counted_by_ref(), so
from gcc 15.1 or clang 22.1 on. The loop below it still increments
nb_desc, which makes it come out doubled there and correct elsewhere.
nb_desc is what pxad_free_desc() iterates over and what
set_updater_desc() indexes from, so set it explicitly and drop the
increment. The error path has to lower it to the number of descriptors
allocated so far, otherwise pxad_free_desc() would free entries that were
never allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: reset the CSA state when leaving
ifmsh->csa is allocated in ieee80211_mesh_csa_beacon() and only freed
in ieee80211_mesh_finish_csa(), i.e. when the channel switch completes.
Leaving the mesh while a switch is still pending therefore leaks it.
Additionally, ifmsh->csa_role and ifmsh->chsw_ttl have their state leak
in this case, so things can get mixed up in addition to the memory
leak.
Refactor the reset and call it in ieee80211_stop_mesh() to fix it all. |
| A vulnerability was detected in GPAC up to 26.07.0. This affects the function gf_fq_pop of the file filter_core/filter_queue.c of the component MP4Box. Performing a manipulation results in use after free. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't allow injecting frames wider than the chanctx
Frames injected on a monitor interface can carry a radiotap
field requesting a bandwidth, which mac80211 passes down to
the driver regardless of the the actual operational bandwidth.
If the bandwidth requested is too wide, that triggers a warning
in hwsim:
WARN_ON(hwsim_get_chanwidth(bw) > hwsim_get_chanwidth(confbw))
Drop such frames entirely instead since they cannot be sent. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't offload TC setup on AP_VLAN interfaces
AP_VLAN interfaces are purely virtual, so don't try to offload
TC setup to drivers. We can't really use the AP interface either
since we may not know it all the time, and it could technically
even change.
Just reject the TC offload so things get done in software. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: check IP header size in cfg80211_classify8021d()
A frame that looks like IP can be transmitted, but be too short, so
the DS field is read incorrectly:
BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180
__ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304
ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538
...
packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:3108
Use skb_header_pointer() like the MPLS case. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/IPoIB: Avoid restoring OPER_UP after multicast flush
ipoib_ib_dev_flush_light() temporarily clears IPOIB_FLAG_OPER_UP to
prevent multicast joins while ipoib_mcast_dev_flush() is running, and
restores the flag afterwards if it was previously set.
This restore races with ipoib_ib_dev_down(). If the interface is brought
down while the flush is in progress, ipoib_ib_dev_down() clears
IPOIB_FLAG_OPER_UP, but the flush path may set it again after the device
has already gone down.
Since commit 894021a75291 ("IB/ipoib: Make the carrier_on_task race
aware"), ipoib_mcast_carrier_on_task() relies on IPOIB_FLAG_OPER_UP
being cleared to terminate its rtnl_trylock() retry loop. If the flag is
left set after shutdown, the workqueue retries forever, causing teardown
to deadlock when ipoib_ndo_uninit() waits in destroy_workqueue() while
holding RTNL.
Instead of overloading IPOIB_FLAG_OPER_UP to block multicast joins
during a light flush, introduce a dedicated IPOIB_FLAG_MCAST_FLUSH flag.
Use it together with IPOIB_FLAG_OPER_UP to determine whether multicast
joins are allowed, avoiding the race with device shutdown. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability that allows low-privileged authenticated users to remove user group members by calling DELETE /sys/user/deleteUserGroupBatch. Attackers can supply any groupId and comma-separated userIds to delete sys_ugroup_user rows without permission or tenant checks, tampering with administrator-maintained groups. |
| JeecgBoot through 3.9.5 contains an insecure direct object reference vulnerability that allows authenticated users to read other users' in-application messages via the getOne handler of SysAnnouncementSendController. Attackers can obtain delivery record ids from the unguarded /sys/sysAnnouncementSend/list endpoint and supply them as the sendId parameter to retrieve message titles, bodies, senders and recipients. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in the SysTenantController queryTenantAuthInfo handler that allows any authenticated user to read other tenants' records. Low-privileged attackers can iterate small integer tenant ids to retrieve full sys_tenant records, including house numbers used as tenant join codes and company profile fields. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability that allows low-privileged authenticated users to remove users from tenant product packs via PUT /sys/tenant/deleteTenantPackUser. Attackers can supply arbitrary userId and packId values in the request body to remove any user from any tenant's product pack, revoking permissions such as tenant administrator access. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: abort transaction on failure to update inode for hole punching and reflinking
If we fail to update the inode we error out without aborting the
transaction, which can result in a persistent inconsistency if after
the failure the transaction is committed, as we have dropped file
extent items from a range and either punched a hole or insert a new file
extent item for that range (for reflinks).
So add the missing transaction abort. |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability that allows any authenticated user to read MCP server configurations because the queryById permission check is commented out. Attackers can obtain record ids from the unguarded /airag/app/queryById endpoint and retrieve MCP endpoint URLs, headers, and outbound authentication tokens. |
| A security vulnerability has been detected in GPAC up to 26.07.0. The impacted element is the function gf_mx_v of the file utils/os_thread.c of the component MP4Box. Such manipulation leads to use after free. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle lack of space when cleaning up verity items
When enable_verity() hits the qgroup limit, rollback_verity() needs its
own metadata reservation. When the qgroup limit or lack of space refuses
the rollback, the whole filesystem is forced read-only even though the
qgroup limit was for one subvolume only. Also orphan cleanup at the next
mount fails the same way, so the leftover items are never removed: with
-EDQUOT the subvolume stays unreachable, and with -ENOSPC on a full
filesystem the next read-write mount fails.
Start transactions with btrfs_start_transaction_fallback_global_rsv() in
btrfs_orphan_cleanup(), drop_verity_items() and rollback_verity(). Those
calls only delete items and free the space in the end, so they may use
the global reserve and skip the qgroup limit, which avoids -ENOSPC and
-EDQUOT. |
| A vulnerability was determined in Studio-Saelix Sencho up to 0.94.1. This vulnerability affects unknown code of the file outboundTarget.ts of the component git-sources Browse API Endpoint. Executing a manipulation of the argument repo_url can lead to server-side request forgery. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The presence of this vulnerability remains uncertain at this time. This patch is called 79b86ddcd4aefdd6941f098e35990ab397b13c72. It is advisable to implement a patch to correct this issue. The vendor explains: "Git repository access is an intentional, privileged administrative function. Sencho explicitly supports repositories hosted on private LAN, VPC, VPN, CGNAT, and IPv6 ULA networks. The report does not demonstrate a privilege-boundary bypass or access by an unprivileged user. We therefore dispute the CVE characterization of this behavior. As defense in depth, we have nevertheless hardened repository access. Git HTTPS and SSH connections now validate and pin DNS resolution, reject loopback, link-local, multicast, selected special-use and metadata targets, disable redirects and inherited proxy routing, and retain strict SSH host-key verification." |
